Tektronix 2465A 350 MHz 4 Channel Oscilloscope
Tektronix 2465A 350 MHz 4 Channel
Rent me for $150 a
The Tektronix 2465A Oscilloscope is a portable 350-MHz
instrument having a four channel vertical deflection system.
Channel 1 and Channel 2 provide calibrated deflection factors from
2mV per division to 5V per division. For each of these channels,
input impedance is selectable between two values: either 1M Ohm in
parallel with 15pF, or 50 Ohm internal termination. Input signal
coupling with 1M Ohm impedance can be selected as either AC or DC.
Channel 3 and Channel 4 have deflection factors of either 0.1 V or
0.5 V per division. Each of these channels has an input impedance
of 1M Ohm in parallel with 15 pF, with DC input signal coupling.
Trigger circuits enable stable triggering over the full bandwidth
of the vertical system.
The horizontal deflection system provides
calibrated sweep speeds from 1.5 sec per division to 500 psec per
division. Drive for the horizontal deflection system is obtained
from a choice of A, B delayed, A alternated with B delayed sweeps,
or CH 1 (for the X-Y display mode).
The Tektronix 2465A incorporates alphanumeric crt
readouts of the vertical and horizontal scale factors, the trigger
levels, time difference measurement values, voltage difference
measurement values, and certain auxiliary information.
- 350 MHz bandwidth at probe tip
- 500 ps/div sweep rate
- 2 mV/div vertical sensitivity
- 500MHz minimum triggering bandwidth
- Four independent channels