Noyes SMLP 4-4 Single and Multimode Fiber Test

Noyes SMLP 4-4 Single and Multimode Fiber Test
Manufacturer: Noyes
Call for pricing
Noyes SMLP 4-4 Single and Multimode Fiber Test Kit


Noyes SMLP 4-4 Single and Multimode Fiber Test Kit

Rent me for $300 a month

Covers 850 and 1300 Multimode and 1310 and 1550 Singlemode in one kit. SC connectors standard others are available.

   The Noyes SMLP 4-4 test kit combines the OPM 4-2D optical power meter and OLS 4 integrated LED and LASER light source and is ideally suited for testing fiber optic networks with hybrid (single-mode and multimode) cables. The OLS 4 features 850 nm and 1300 nm LED output from a multimode output port and 1310 nm and 1550 nm LASER output from a single-mode output port. The LED and LASER outputs are stabilized to ensure accurate test results per current TIA/EIA requirements. This light source offers 4 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, CW, and modulated Tone. [Active Output], [Tone], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence. Both output ports are equipped with removable SC (FC & ST available) adapters to allow the output connectors to be inspected and cleaned.

   The Noyes OPM 4-2D offers Wave ID, automatic wavelength identification and switching, when used with the OLS 4. Multiple test Tone detection is provided for fiber identification. The OPM 4-2D stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4-2D or OLS 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4-2D optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4-2D and OLS 4 are fully N.I.S.T. traceable.


  • Rugged, handheld, lightweight
  • Designed for field use
  • Certify multimode and single-mode links per TIA/EIA standards
  • Wave ID - automatic wavelength identification and switching
  • Dual Wave ID, single Wave ID, CW, and modulated Tone (on single-mode output) 270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone
  • Large LCD with Backlight
  • Power measurements in dBm or µW; insertion loss in dB Reference power level storage
  • AA alkaline, optional rechargeable NiMH battery pack or AC adapter
  • Low battery indicator
  • Cost-effective, easy to use
  • N.I.S.T traceable