Noyes 1310 Singlemode Fiber Optic Kit

Noyes 1310 Singlemode Fiber Optic Kit
Manufacturer: Noyes
Call for pricing
Noyes 1310 Singlemode Fiber Optic Kit

 

Noyes 1310 Singlemode Fiber Optic Kit

Rent me for $150 a month

with SC connectors and -10 dbm output

Kit consists of a OLS2 1310 Source with OPM4 Power Meter 

Noyes OLS 2 - Dual Laser Light Source with Wave ID

   The Noyes OLS 2 laser source is a cost-effective, rugged, handheld instrument designed for performing insertion loss measurements on single-mode fiber optic links when used with an optical power meter. When paired with an optical fiber identifier, the OLS 2 may be used for fiber identification. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements.

   Three versions of the OLS 2 are available for measurements at 1310 nm, 1550 nm, 1625 nm. This light source offers 2 modes of operation: continuous wave (CW) and 2 kHz modulated Tone. [Laser Active], [Battery], and [External Power] indicators identify the enabled laser, battery charge status, and external power presence. The output port is equipped with FC, SC, or ST style connector. The OLS 2 laser sources operate on disposable batteries or AC adapter. The OLS 2 is fully N.I.S.T. traceable. 

Noyes OPM 4 - Adds Wave ID & Set Reference 

   The Noyes OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables.

   The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or μW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack.

   The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.

US-Instrument.com