Instek LCR-8110G 20 to 10 MHz Precision LCR Meter

Instek LCR-8110G 20 to 10 MHz Precision LCR Meter
Manufacturer: Instek
Call for pricing


New Instek LCR-8110G 20 to 5 MHz Precision LCR Meter


Instek LCR-8110G 20 to 10 MHz Precision LCR Meter

Available for leases and rentals please call

   The Instek LCR-8110G Series LCR meter, with test frequency up to 10MHz, provides accuracy, versatility and high resolution for a wide range of component measurements, even including DC resistance measurement and Voltage/Current monitoring. The Multi-Step function allows on-screen programming of customized measurement sequence with Pass/Fail indication. Each program includes 30 test steps and each test step can be set with selected parameters and test limits. Under Multi-Step operation, a tedious work routine can be done step by step automatically just at a press of a button. With Graph Mode, LCR-8110G, LCR-8105G and LCR-8101G display the component impedance response either over a wide range of test frequency sweep or over a wide range of test voltage sweep in a graph chart. This gives an analysis result of either impedance vs. frequency or impedance vs. applied voltage all at a glance. GPIB and RS-232C interfaces are available as standard for instrument control and test result display on the PC. The rich features of LCR-8000G Series easily make your measurement tasks done at a very competitive price.


  • Test Frequency 20Hz ~ 10MHz
  • Large LCD Display
  • 6 digit Measurement Resolution
  • 0.1% Basic Measurement Accuracy
  • Multiple Step Mode
  • DC Resistance Measurement
  • Comprehensive Measurement Functions
  • Monitoring of DUT Voltage and Current
  • Pass/Fail Test
  • Standard Interface : RS-232 & GPIB
  • Graph Mode

   The Instek LCR-8110G Series is designed to perform precision impedance measurements over a wide frequency range of 20Hz~10MHz. The instrument is capable of measuring 11 different parameters with0.1% basic accuracy, which meets the precision measurement requirements of components and modules used in the RF circuits. The large LCD display with single-layer operation menu of LCR-8000G Series provides users with ultimate convenience to plug and play without much learning time.

   In the Pass/Fail test, primary parameter measurement result is compared with user-defined limits and the pass or fail result is then displayed. Three methods, including absolute limit, percentage and delta limit, are available for Hi (high) and Lo (low) limit setting based on the nominal test value. The Pass/Fail test checks whether the parameter measurement result sits within the limits, then display "PASS" for within the limits, or "LO" for lower than the low limit, or "HI" for higher than the high limit.

   The graph function shows the component characteristics in visual manner. Either voltage sweep or frequency sweep can be selected for horizontal scale. Just select the parameter, and set the start/stop voltage or the start/stop frequency of the sweep, LCR-8110G will run through the sequence of measurements and show the results on a graph. This graphical parameter measurement performs the characteristic verification of components and materials over the response to the changes in AC test frequency or AC test voltage without the need of complex programming of an external controller. When the graph gets out of the vertical range, the LCR-8110G Series can automatically adjust the scale to get full test information. On the graph the marker operation is available for detailed observation.