KeyTek ECAT® Model E513 SURGE SIMULATOR MODULE
KeyTek ECAT® Model E513 SURGE SIMULATOR MODULE
Plug-in module to produce voltage ramps for testing surge protection
components such as gas tube arrestors; meets surge
simulator requirements of UL 864
Options
-
E513-VI - adds voltage and current monitoring
WAVEFORMS
Voltage Ramps
|
-
0.1kV/µs, 0.5kV/µs, 1.0kV/µs, 5.0kV/µs, 10kV/µs, 0.1kV/µs is linear to 2.5kV; all other ramps linear to
3.0kV
-
Note: Specified ramp rates are obtained with an open-circuit voltage setting of 3.0kV.
|
Short-Circuit Current
|
-
50A, ±10% when the peak open-circuit
voltage is set to 3.0kV
|
Open-Circuit Voltage
|
-
0-3000V; ±5% in 1 volt steps
|
Voltage Durations
|
-
~65µs for 0.1kV/µs; ~40µs for 0.5kV/µs and 1kV/µs;~5µs for 5kV/µs and 10kV/µs
|
Current Durations
|
-
~45µs at 0.1kV/µs; ~40µs at 0.5kV/µs and 1.0kV/µs; ~5µs at 5kV/µs and 10kV/µs
|
Minimum System Requirements
|
-
E100 Series control
|
NOTE: To obtain linear fronts, waves are quasi-square waves with 20-25% initial overshoots beyond peak open-circuit voltages, except for the 0.1kV/µs which is roughly triangular. Undershoots range from 5 to 25%
US-Instrument.com