KeyTek ECAT Model E411 TRUE-EFT SIMULATOR MODULE

KeyTek ECAT® Model E411 TRUE-EFT™ SIMULATOR MODULE

   EFT/Noise Burst simulator for testing in accordance with IEC 621-4-4 Edition 2 to 4.4kV.

Options

• E411-2MHz - increases EFT burst frequency to 2MHz @ </= 3kV
• E411-CH - adds Chirp
• CCL4/S - capacitive coupling clamp per IEC 621-4-4

ELECTRICAL

Burst Polarity	Positive, negative, alternating
Burst Voltage	200V to 4.4kV
Burst Voltage Resolution	5V
Burst Voltage Tolerance	±10% of setting with no load ÷ 2 with 50Ω load; ±20% of setting
Burst Frequency	Adjustable from 1kHz to 1MHz up to 4.4kV
Burst Duration	1.0ms to 20ms; 1.0ms resolution or 1 to 200 pulses
Period Between Bursts	Adjustable from 300ms to 5s; 1ms resolution
Burst Test Length	1 to 360 sec.; 1 sec. resolution 1 to 240 min.; 1 min. resolution 1 to 24 hours; 1 hour resolution
Wait Time Between Tests	1 to 360 sec.; 1 sec. resolution 1 to 240 min.; 1 min. resolution 1 to 24 hours; 1 hour resolution
Voltage Monitor	Built-in; 150MHz bandwidth
Minimum System Requirements	E100 Series control center with blank plug-in module (if no other half-width module is ordered)
Coupler/decoupler	See Model E455X

Notes:For any combination of frequency, duration and period, the number of pulses cannot exceed 600 per second and 200 per burst.

US-Instrument.com