GW INSTEK APS-7050 500VA PROGRAMMABLE AC POWER SOURCE

GW INSTEK APS-7050 500VA PROGRAMMABLE AC POWER SOURCE
Manufacturer: Instek
Call for pricing

 

New GW INSTEK APS-7050 500VA Programmable AC Power Source New GW INSTEK APS-7050 500VA Programmable AC Power Source

2 YEAR WARRANTY ON INSTRUMENT

   GW Instek rolls out the brand new APS-7000 series programmable AC power source. With the height of 2U, the maximum rated output for APS-7050 is 500VA, 310Vrms, 4.2Arms and APS-7100 is 21VA, 310Vrms, 8.4Arms. The output frequency range of the series is 45~500Hz. The optional collocation can conveniently augment the out put voltage for the range of 0~600Vrms and output frequency range of 45~999.9Hz. The series is ideal for the test and development of DC power supply devices, consumer electronics,automotive electronics and electronic components. The APS-7000 series comprises nine measurement and test functions (Vrms, Irms, F, Ipk, W, VA, PF, Ipk hold, CF),and provides user interface similar to that of AC Power Meter. The APS-7000 series, via switching many sets of current levels to increase small current measurement resolution, is ideal for the LED industry and standby mode power consumption test. Under the ARB mode, the APS-7000 series provides waveforms,including SINE waveform, Triangle waveform, Staircase waveform, Clipped Sinewave, Crest factor waveform, Surge waveform, and Fourier series to meet the requirement of simulating abnormal input power waveform test of different industry. Ten sets of Preset allow users to store ten settings; Power ON Output setting allows Sequence, Simulate, and Program to automatically execute output after the equipment power is on; SCPI Emulation is compatible to the control command of the EXTECH 6700 series. To meet the test criteria of line voltage fluctuation often seen in consumer electronics, the APS-7000 series features five methods to cope with special purpose or abnormal voltage, frequency, and phase; ten sets of the Simulate mode simulate power outage, voltage rise, and voltage fall; ten sets of the Sequence mode allow users to define parameters and produce sine wave by editing steps; ten sets of the Program mode can edit AC waveform output and define the ceiling and floor level of measurement items for different DUT; Ramp Control allows users to set the variation speed for output voltage rise and fall; Surge/Dip Control simulates DUT¿s input power producing a Surge or Dip voltage overlapping with output voltage waveform at a specific time. Ethernet Port, on the rear panel of the series, can be used for remote program control; Sync Output Socket provides external 10V sync output; Signal Output Connector provides monitor of Program execution results. The APS-7000 series also provides Trigger In/Out and Output on/off remote control functions from J1 connector on the rear panel.

Features and Specification Highlights
    • 4.3 inch TFT LCD Display
    • Output Capacity 21VA
    • 2u 3.46 inches case height
    • Arbitrary Waveform Function
    • Surge/Dip control
    • Measurement Function: Voltage, Current, Power, App Power, IPKH, Freq, PF, Crest
    • 10 sets of presets
    • Support SCPI Emulation
    • LabVIEW Driver
    • USB Host, LAN optional GPIB, RS232
Standard Accessories
  • CD ROM, User manual, Programming Manual
  • Power Cord
  • GTL-123 Test Lead
  • Mains Terminal Cover Set
  • Certificate of calibration

US-Instrument.com