Fluke 80I-1010 Current Probe

Fluke 80I-1010 Current Probe
Manufacturer: Fluke
Call for pricing
Fluke 80I-1010 Current Probe


Fluke 80I-1010 Current Probe

Rent me for $100 a month

   The 80I-1010s AC/DC Current Clamp is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.


  • Current Range: 0.1 to 21A DC or 0.1 to 700A AC
  • Basic Accuracy (DC to 1kHz): 100mV/A setting= 50mA to 10A +/- 3% of reading + 50mA ; 10mV/A setting= 50mA to 40A +/- 4% of reading + 50mA , 40A to 80A +/- 12% of reading + 50mA, 80 to 100A +/- 15% of reading.
  • Output Signal: 10A range: 100mV/A | 100A range: 10mV/A
  • Bandwidth: 1Hz to 20kHz
  • Working Voltage: 600V AC rms
  • Maximum Conductor Size: 11.8 mm (.46 inch) diameter
  • Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V

   The Fluke 80I-1010 is a battery-powered Hall-effect clamp-on probe measures AC current to 700A, DC current to 21A. Thumbwheel ZERO control compensates for residual core magnetism, improving the accuracy of DC measurements down to 1A. Output is 1 mV per Amp DC or AC. Maximum conductor size: one 1.18" (30 mm) or two 0.98" (25 mm). Accuracy: +/- (2%+1A), 1A to 100A, DC to 62 Hz. Useable to 440 Hz