Fieldsense ProHD Personal RF Monitor
Fieldsense ProHD Personal RF
Rent me for $100 a
There are two versions of this product. One for professional
use and a different model for public use.
The awareness and management of EMF exposure is an
increasingly critical factor that must be considered by network
operators and professionals involved in on-site operations at BTS
antenna sites. FieldSENSE Occupational is a personal RF monitor
which enables technical personnel to avoid areas where they would
be in danger of RF overexposure. fieldSENSE Occupational introduces
a cost-effective solution for mobile network operators and
professionals searching for a way to ensure safety for all
personnel working in the vicinity of base station antennas.
- Affordable & competitively priced
- Indicates RF field strength using bright LED's
- Pinpoint and monitor active and idle antennas.
- Loud alarm will warn in case of EMF overexposure danger.
- Uncomplicated, robust and reliable.
- Calibrated to ICNIRP Occupational reference levels.
When approaching a base station site, the RF
technician may use FieldSENSE Occupational in Measure mode to
ensure that he/she is not overexposed. In Measure mode the field
strength is measured continuously. A level indicator bar provides
visual feedback of the exposure levels as the instrument is moved
around. The user can pinpoint sources of RF radiation and confirm
that specific base station sectors have been shut down, or are
transmitting reduced power levels so that can it be considered safe
to approach and complete a required task.
After confirming that relevant sectors have been
powered down, FieldSENSE Occupational can be switched to 'monitor'
mode and mounted in a suitable position and orientation. FieldSENSE
continuously monitors the RF radiation levels and will alert the
worker in the case of significant exposure changes. The worker is
alerted by both an audio alarm and a visual alarm on the level
International Exposure Limits
The unit is calibrated to the ICNIRP Occupational
The operational frequency range is limited to bands
commonly used for mobile telecommunications.
Omni-directional, linear polarization
The FieldSENSE device should be held upright when
being used to locate sources of EMF radiation. This will ensure
that the omnidirectional, vertically polarized field probe will
provide the user with a conservative measurement of the exposure at
that position, also for cross-polarized BTS antennas. In monitor
mode, the FieldSENSE should also mounted vertically to ensure