Exfo IQ-6100 Erbium-Doped Fiber Amplifier

Exfo IQ-6100 Erbium-Doped Fiber Amplifier
Manufacturer: Exfo
Call for pricing

 

Exfo IQ-6100 Erbium-Doped Fiber Amplifier

 

Exfo IQ-6100 Erbium-Doped Fiber Amplifier

   The Exfo IQ-6100 Erbium-Doped Fiber Amplifier (EDFA) is part of the IQ-200 Optical Test System, EXFOs unmatched modular-concept test unit. The addition of an optical amplifier offers considerable flexibility to a WDM active component test setup. Use the EDFA to investigate non-linear effects such as four-wave mixing, or to calibrate and verify power meters, photodetectors and attenuators at high power levels.

Features

  • User-friendly operation
  • Easy one-slot IQ-200 module insertion
  • Compatible with EXFO tunable laser sources

Stability

   The IQ-6100 attains a maximum drift of ± 0.01 dB, preserving input signal stability. Combine this EDFA with the EXFO IQ-2600 Tunable Light Source or the IQ-2400 WDM Laser Source to evaluate non-linear properties of optical materials in the 1550 nm band.

Powerful Versatility

   For use with single or multiple wavelength signals, this optical amplifier increases output power from 0 dBm up to 15 dBm. Ideal for integration in WDM active component test setups, it enables the adjustment of WDM signals to the total input power level required for system or booster-amplifier modules. Achieve adequate power levels conveniently with this C-band amplifier.

High power

   Add an EDFA booster to increase the flexibility of your WDM active component testing platform. Easily adjust multiple signals to the total input power level required for higher power subsystem characterization.

Specifications

  • Wavelength range (nm) 1530 to 1560
  • Saturated output power (dBm) at 3 dBm input power typical > 14 minimum 13 maximum 15
  • Noise figure (dB) typical 8
  • Output power stability1 (dB) ± 0.01 (Ä = 0.02)
  • Polarization dependent gain (dB) < 0.2
  • Optical return loss (dB) typical 35
  • Small signal gain (dB)2 minimum 29

US-Instrument.com