Associated Research 3565D AC/DC Advanced Hipot
Tester
Associated Research 3565D AC/DC
Advanced Hipot Tester
Rent me for $300 a
month
Enhanced AC/DC Hypot with Ground Continuity Test Set
The most common applications of the dielectric-withstand (Hipot)
test are:
- Design (performance) Testing - Determining design adequacy to
meet service conditions.
- Product Line Testing - Detecting defects in material or
workmanship during processing.
- Acceptance Testing - Proving minimum insulation requirements of
purchased parts.
- Repair Service Testing - Determine reliability and safety of
equipment repairs.
Features
- Output Range:
- AC: 0 - 5 kV, 2V / step, 12 mA
- DC: 0 - 6 kV, 2V / step, 5 mA
- Regulation: ± (1% of output + 5V)
- Output Frequency: Sinewave, Distortion: <2% THD
- Output Resolution: 10 volt/step
- Output Accuracy: ±2% of setting + 5 volts
- Leakage Current: 12 mA
- Adjustable High and Low Limits ( 0.01 mA resolution )
- Timer: 0.0 - 999.9 seconds
- Ground Continuity Current: DC 0.1A ± 0.01A, fixed
- Input Voltage: 120/230 V AC, ± 15 %, Single Phase, 47 - 63
Hz
- Weight: 20 lbs (9.07 kg)
RAMP TIME SETTING 0.2 - 999.9 seconds in 0.1 second
increments 0 ramp setting = 0.1 seconds fixed
METERING Voltmeter (3 digits)
- Range: AC 0.00 - 5.00 KV
- DC 0.00 - 6.00 KV
- Resolution: .01 KV
- Accuracy: ± (2% of reading + 10 V)
AMMETER (4 digits)
- Range: AC 0.10 - 12.00 mA
- DC 0.02 - 5.00 mA
- Resolution: .01 mA
- Accuracy: ± (2% of reading + 0.02 mA)
TIMER DISPLAY Range: 0.0 - 999.9 seconds
- Resolution: 0.1 second
- Accuracy: ± (0.1% of reading + 0.05 seconds)
GROUND CONTINUITY CHECK
- Current: DC 0.1A ± 0.01A, fixed
- Max. ground resistance: 1 ohm ± 0.1 ohm, fixed
REMOTE CONTROL AND SIGNAL OUTPUT
The following input and output signals are provided through
the 9 pin D type connector:
- Inputs: test and reset
- Outputs: pass, fail, and test in process
US-Instrument.com