Anitsu ML9002A Handheld
Optical Power Meter
ML9002A is a compact handy power meter with a measurement level as wide
as other more expensive instruments. Seven optical sensors are
available for different wavelengths, measurement levels, and optical
input types. Each can be calibrated for three common wavelengths so
absolute optical power can be read directly. Each optical sensor can
either be incorporated directly in the main frame or connected using a
connecting cord. The ML9002A can be used to check optical disks,
optical printers and optical communications systems and can back-up
on-side operations as a powerful multifunctional measuring instrument
· Accurate optical power measurement The power of a narrow beam
can be accurately measured even when an adaptor is changed because
anti-reflection optical sensor is used.
· Long-distance measurement with wide measurement level range
An unprecedented wide measurement level has been achieved in this handy
optical power meter. Optical power of ¿70 to +3 dBm (MA9621A Optical
Power Sensor) in the 1.3 µm band and ¿70 to +10 dBm (MA9423A
Optical Power Sensor) in the 0.85 µm band can be measured.
· Direct absolute power readings for three wavelengths Each
optical sensor is calibrated at three wavelengths (0.633/0.78/ 0.85
µm or 0.66/0.78/0.85 µm for short wavelengths, and
0.85/1.3/ 1.55 µm for long wavelengths). The absolute power is
indicated automatically just by switching to the measured wavelength.
· Flexible measurements Two types of connections, a plug-in
system (sensor incorporated into main frame), or a cord system (sensor
connected using connecting cord), are possible so that measurement
capabilities are flexible.
· Monitoring without cutting optical fiber The optical power in
an optical fiber cable (ø0.25 mm, UV-coated fiber) can be
measured by using the MA9722A Optical Power Sensor.
· Compatible with various connectors The ML9002A can be quickly
connected to FC, D4. RUNGE, ST, DIN, DIAMOND, and SC connectors just by
replacing the connector adaptor.