Agilent/HP J2300D Internet Advisor

Agilent/HP J2300D Internet Advisor
Manufacturer: Agilent / HP
Call for pricing


Agilent/HP J2300D Internet Advisor


Agilent/HP J2300D Internet Advisor

Rent me for $400 a month

May require an undercradle or a plug in module for your needs

   The Agilent/HP J2300D mainframe comprises the acquisition system for all ATM and WAN plug-in modules plus the V series interfaces, connectors for which are located on the body of the mainframe. In addition, the mainframe includes a full PC running the Microsoft® Windows98® operating system on a 300 MHz processor, a built in keyboard with pointing device, a Super VGA active color display, dual PCMCIA card slots, stereo speakers and the usual printer and serial ports. The PC is used to control the mainframe acquisition system and the acquisition system in any attached undercradle, and to collect and post process results. Note that the PC is not used for real-time processing of measurements . this is all done in the acquisition system and plug-in modules. This allows the PC to handle multiple tasks such as the Dual Simultaneous Analysis feature which involves the simultaneous control of the mainframe acquisition system and attached undercradles, as discussed later.


  • Internet Advisor WAN Complete protocol analysis for WAN testing with a powerful and rugged personal computer.
  • Monitor all major WAN communication protocols from 50 bps to 622 Mbps
  • Protocols: frame relay, ATM, ISDN, X.25, HDLC, SDLC, SNA, async PPP and encapsulated LAN protocols running over the wide area network
  • All major WAN interfaces built in: RS-232C / V.24, RS-449 / 422 / 423, V.10/V.11 and V.35 (some optional)
  • Full RS-232C/V.24 Breakout Box
  • Data Rates for All Monitoring Simulation and BERT: any speed from 50 b/s to 2.048 Mb/s
  • Data Analysis Memory: 768 KB capture buffer, 128 KB nonvolatile RAM and 1.44 MB floppy.
  • 300 MHz processor
  • 3 GByte hard drive
  • 1.44 Mbyte floppy disk, pointing device, serial & parallel ports
  • Two PC card (Type I/II) slots for modem or NIC (network interface card)
  • 640 x 480 VGA 10.4" color active matrix display, ext. monitor monitor support Side
  • Plug-Ins: ISDN BRI and PRI, T1, DS-1 / E1, DS-3 / E3 and OC-3c / STM1.
  • Undercradles: LAN, Ethernet, switched Ethernet, Fast Ethernet, Gigabit Ethernet, FDDI and token-ring

   The Agilent/HP J2300D Internet Advisor has the ability to test two different interfaces and technologies simultaneously, e.g. E1 Frame Relay and E3 ATM, DS3 Frame Relay and 10/100 Mbps Ethernet, ATM25 and OC-3c ATM, etc. This functionality lets you to test interworking in mixed technology environments. In order to perform dual simultaneous analysis, combinations of an Advisor mainframe (J2300D or J3446D) and an undercradle (J3444A or J2900A) is required, the mainframe and undercradle being each supported by an application (LAN, WAN or ATM) running on the PC embedded in the mainframe. Note that the applications do not have to be different so, for example, a J2300D Advisor mainframe fitted with a J2900A High Speed undercradle could each be fitted with the same type of ATM or WAN interface and be run simultaneously . e.g. two J3766A ATM25 interface modules.