Agilent/HP J2294C E1/ISDN Plug In

Agilent/HP J2294C E1/ISDN Plug In
Manufacturer: Agilent / HP
$99.00
Agilent/HP J2294C E1/ISDN Plug In

 

Agilent/HP J2294C E1/ISDN Plug In

For use with the J2300C/2300D/J2300E

   This interface comprises a choice of a plug-in module J2294C suitable for plugging into the J2300C/2300D/J2300E Advisor mainframe and the J2900A High Speed undercradle. The J2294C has RJ-45 and DB-9 connectors which, with converter cables, can connect to 120 Ohm Small Siemens connectors. These modules handle cell and frame based technologies, i.e. ATM, Frame Relay, ISDN, HDLC, X.25, PPP, and BERT. These interfaces do not support Frame Relay CIR and SLA measurements.

Features

  • Common to Inputs and Outputs: Connectors: J2294C: balanced 120 Ohm DB-9 and RJ-45
  • Line Code: ATM: HDB3 WAN: HDB3, AMI
  • Electrical: ITU-T G.703
  • Framing: ATM: ITU-T G.704 alternate framing with or without CRC-4
  • WAN: ITU-T G.704 alternate framing with or without CRC-4 Fractional channel, any multiple of 64 kbps channel Unframed at 2.048 Mbps
  • Cell Mapping: Direct (ITU-T G.804)
  • Cell Scrambling: Conforms to ITU-T I.432.1 (x43 + 1) and may be turned on or off
  • Inputs: Two ports
  • Levels: ITU-T G.703
  • Monitor modes: Terminated, 120 Ohm balanced (J2294C) Bridged (High Impedance) Terminated
  • Monitor Jack -20 dB and -30 dB

Physical Layer Alarms and Statistics

  • Loss of Signal (LOS)
  • Loss of Frame (LOF)
  • Alarm Indication Signal (AIS)
  • Remote Alarm Indication (RAI)
  • Line code violations
  • CRC-4 errors (if CRC-4 is selected)
  • Frame alignment error
  • Loss of Cell Delineation (LCD)
  • ATM Layer Statistics:
  • Average utilization in percent
  • Instantaneous utilization in percent
  • Total cells received
  • Idle/unassigned cells received
  • Busy (assigned) cells received
  • Header (.HEC.) errors
  • Capture buffer size: 28 Mbyte (approximately 400,000 cells)
  • Capture buffer timestamp resolution: 100 ns
  • Capture rate: Full line rate 31
  • Outputs: Two ports, 75 Ohm unbalanced (J2296B)
  • Levels: ITU-T G.703
  • Clocking: Recovered (loop), Internal and External (using other receiver input) Internal clock rate accuracy: +/- 50 ppm

US-Instrument.com