Agilent/HP 84110EM 1.8GHz EMI System

Agilent/HP 84110EM 1.8GHz EMI System
Manufacturer: Agilent / HP
Call for pricing

Agilent 84110EM 1.8 Ghz EMC Spectrum Analyzer System

Rent me for $1500 a month


The 84110EM Pre-Production Evaluation System has everything you need to perform radiated and conducted emissions measurements on your product. The unit is based on the 8591EM which contains a quasi-peak adapter and dual I/O ports (HP-IB and parallel). The system also includes 11955A Biconical Antenna and 11956A Log Periodic Antenna, 11968C Tripod, 11966L 10-meter cable, 11967D Line Impedance Stabilization Network, 11947A Transient Limiter and 11945A Option E51 Close Field Probe Kit. Also included is the 85878A Report Generator software, a 256 KB RAM card and a ROM card with regulatory limits and transducer factors.

Consisting of the following components:

Agilent 8591EM EMC Spectrum Analyzer, 9kHz-1.8GHz

Agilent 11947A Transient Limiter

Protects spectrum analyzer input from damage caused by high level transients from LISNs ( Line Impedance Stabilization Networks ) during EMI testing.

Agilent 11945A-E51 Close Field Probe Kit with Preamp


    • Designed to measure magnetic-field radiation from surface currents, slots, cables, and ICs for EMC diagnostic and troubleshooting measurements.


    • Operates from 9 kHz to 1 GHz


    • Comes with a 2-meter RG-223 coaxial cable and SMA (f)-to -type-N (m) adapter, and an SMA (f)-to-BNC (m) adapter for each probe.


    • Option E51 adds the HP / Agilent 8447F Option H64 dual preamplifier ( or HP / Agilent 11909A preamplifier ), a 36-inch  (914-mm) type-N cable, and a carrying bag for storage and protection of the entire set.


Agilent 11955A ( EMCO 93110 ) Biconical Antenna
    • Frequency Range: 30 MHz to 300 MHz
    • Max Continuous Power: 0.5 W
    • VSWR (avg): 1.8 : 1
    • Impedance: 50 ohm
    • Connector: type N female
    • Mounting Base: 1/4 inch x 20 female thread
Agilent 11956A ( EMCO 93146 ) Log Periodic Antenna
    • Frequency Range: 200 MHz to 1 GHz
    • Max Continuous Power: 1 kW
    • Impedance: 50 ohm
    • Connector: type N female
    • Mounting Base: 1/4 inch x 20 female thread

Agilent 11968C ( EMCO TR-3 ) Tripod

Agilent 11967D ( EMCO 3810/2 ) LISN / PLISN