Agilent/HP 6632B 20 Volt 5 Amp Power Supply

Agilent/HP 6632B 20 Volt 5 Amp Power Supply
Manufacturer: Agilent / HP
Call for pricing

 

Agilent/HP 6632B 20 Volt 5 Amp Power Supply

 

Agilent/HP 6632B 20 Volt 5 Amp Power Supply

Rent me for $150 a month

  The Agilent/HP 6632B System dc Power Supply is an ideal power source for demanding production test applications. This dc power supply offers high performance and precision measurements in a one-box solution. To reduce test-system development time and provide precision testing, the 6632B provides current measurement down to the microamp level. The 6632B also provides high-speed programming with under 4 millisecond response time.

Features

  • 0 to 20Vdc, 0 to 5A.
  • Programming accuracy (V/A): 0.05% +10mV / 0.05% + 2mA.
  • Load regulation: 2mV / 1mA.
  • Ripple & noise (rms/p-p): 0.3mV / 3mV.
  • Precision low current measurement,
  • Low-output noise, High-speed programming,
  • GPIB and RS-232 interfaces,
  • VXI plug & play drivers.
  • Operates from 104 to 127 Vac; 47-63 Hz operation.
  • Weight: 28 lb;
  • Size: 88mm (3.5 in)H x 426mm (16.75in)W x 364mm (14.3in)D.
  • Order option J07 for use with inductive loads.

   This series of linear-regulated 80-100 W dc power supplies is designed to maximize the throughput of DUTs through the manufacturing test process. Both programming and measurement are optimized for speed. The active down programmer can sink up to the full rated current of the power supply, which quickly brings the power supply output to zero volts. The 6630B Series offers many advanced programmable features including stored states and status reporting. Programming is done using industry standard SCPI commands via the GPIB or RS-232. Test system integration is further simplified by using the VXI Plug&Play drivers. The optional relays simplify system design and troubleshooting.

Supplemental Characteristics

  • DC Floating Voltage: Output terminals can be floated up to ±240 Vdc maximum from chassis ground
  • Remote Sensing: Up to two volts dropped in each load lead. Add 2 mV to the voltage load regulation specification for each one volt change in the positive output lead due to load current change.
  • Command-Processing Time: Average time required for the output voltage to begin to change following receipt of digital data is 4 ms for the power supplies connected directly to the GPIB. (Display disabled).
  • Output-Programming Response Time: The rise and fall time (10/90% and 90/10%) of the output voltage is less than 2 ms (400 μs in fast mode). The output voltage change settles within 1 LSB (0.025% x rated voltage) of final value in less than 6 ms (2 ms in the fast mode).
  • GPIB Interface Capabilities: IEEE-488.2,
  • SCPI command set and 6630A Series programming compatability

US-Instrument.com