Agilent/HP 6032A 60V 50A Power Supply

Agilent/HP 6032A 60V 50A Power Supply
Manufacturer: Agilent / HP
Call for pricing


Agilent/HP 6032A Power Supply 60 Volts at 50 Amps
Agilent/HP 6032A Power Supply 60 Volts at 50 Amps

Rent me for $400 a month

   The Agilent/HP 6032A system power supply is an autoranging GP-IB power supply. It uses power MOSFETs in a 20 kHz switching converter to provide an auto ranging output characteristic with laboratory performance. Output voltage and current are continuously indicated on individual meters. LED indicators show the complete operating state of the unit. Front-panel controls allow the user to set output voltage, current and overvoltage protection trip levels. Overvoltage protection (OVP) protects the load by quickly and automatically interrupting energy transfer if a preset trip voltage is exceeded. Foldback protection can be selected to disable the power supply output if the unit switches from Constant Voltage (CV) to Constant Current (CC) mode or vice-versa. The power supply can be both a listener and talker on the GP-IB, and can be programmed directly in volts and amps. Power supply status can be read over the GP-IB, and the power supply can be instructed to request service for any of ten conditions. Upon command, the power supply will measure its output voltage, output current, or OVP trip voltage and put the value on the GP-IB. New output values can be put on hold and triggered later, allowing the controller to synchronize multiple power supplies at one time. Output connections are made to rear-panel screw-on terminals. Either the positive or negative output terminal may be grounded or the output may be floated up to + 240 Vdc (including output voltage) from chassis ground. Output voltage can be locally or remotely sensed. The power supply is fan cooled.


  • 0 to 60 Vdc
  • 0 to 50 A
  • Programming accuracy: 0.035% + 40 mV
  • Load regulation: 0.01% + 5 mV
  • Ripple & noise (rms/p-p): 8 mV / 40 mV
  • SCPI (Standard Commands for Programming Instruments)
  • Autoranging output
  • VXI plug & play drivers
  • 104 to 127 Vac; 47-63 Hz operation
  • Weight: 36 lb;
  • Size: 132.6 mm (5.25 in)H x 426 mm (16.75 in)W x 504 mm (19.8 in)