Agilent/HP 5347A 20 GHz Counter/Power Meter

Agilent/HP 5347A 20 GHz Counter/Power Meter
Manufacturer: Agilent / HP
Call for pricing
Agilent/HP 5347A 20 GHz Counter/Power Meter


Agilent/HP 5347A 20 GHz Counter/Power Meter

Rent me for $300 a month

   The Agilent/HP 5347A 20 GHz Microwave Counter/Power Meter offers the convenience of a single instrument that makes frequency and power measurements with accuracy and resolution comparable to stand-alone instruments. As a true power meter, the Agilent/HP 5347A offers excellent dynamic range, linearity, and accuracy. It uses the same proven power sensors as Agilent/HP's standalone power meters. The high-performance frequency counter measures frequency from 10 Hz to 20 GHz.

   With only five function keys, the Agilent 5347A is especially easy to use. Its rugged, lightweight package, along with an optional internal battery that provides up to two hours of cordless measurements, makes the Agilent 5347A ideal for taking portable measurements.


  • True power meter performance
  • Negligible power meter error
  • Outstanding frequency measurements
  • Built-in sensor calibration tables save time
  • External DC operation for greater measurement flexibility
  • Supports three HP power sensors

Specifications for Input 1

  • Frequency Range: 500 MHz to 20 GHz 
  • Sensitivity 500 MHz - 12.4 GHz: -32 dBm, 12.4 GHz - 20.0 GHz: -27 dBm
  • Resolution: 1 Hz or 10 kHz, selectable

Specifications for Input 2

  • Frequency Range: 10 Hz - 525 MHz
  • Sensitivity: 25 mV rms 
  • Impedance: 1 Mohm nominal or 50 ohm nominal
  • Accuracy: ±1 LSD ±[(1.4 x Trigger Error/Gate Time)±Time Base Error] x frequency
  • Resolution: 1 Hz or 10 kHz, selectable
  • AM Tolerance: Any modulation index provided the minimum signal level is not less than the sensitivity specification.

Power Meter

  • Frequency Range: 0 MHz to 20 GHz, sensor dependent Power Range: -70 dBm to +20 dBm (100 pW to 100 mW) sensor dependent
  • Dynamic Range: 50 dB in 10 dB steps Resolution: 0.01 dB in logarithmic mode, 0.1% of full scale in linear mode.
  • Auto Filter: The meter automatically selects the required number of averages for the selected range.
  • Accuracy Instrumentation: ±0.02 dB or ±5%
  • Zero Set (digital settability of zero): ±5% of full scale on most sensitive range. Decrease percentage by a factor of 10 for each higher range, ±1 display count.