Agilent/HP 1142A Probe Control and Power Module

Agilent/HP 1142A Probe Control and Power Module
Manufacturer: Agilent / HP
Call for pricing

 

Agilent/HP 1142A Probe Control and Power Module
Agilent/HP 1142A Probe Control and Power Module

Rent me for $75 a month

   The Agilent/HP 1142A Probe Control and Power Module can power and control the 4A Differential Probe, 22A 800 MHz Active Probe and the 8A 750 MHz Active Probe for SMD. If the instrument does not have an internal 50-ohm termination, an external termination can be used with high-impedance inputs.

Features
  • Required for operation of Agilent 4A Differential Probe
  • Independently powers the Agilent 22A 800 MHz Active Probe and the Agilent 8A 750 MHz Active Probe for SMD

   The 4A/1142A probe system allows measurement of small differential signals in the presence of much larger common-mode signals. It has the following major feature:

  • 200 MHz bandwidth
  • Variable offset
  • dc reject
  • ac coupling
  • Remote operating capability

   The variable offset capability can be used to measure small ac signals in the presence of much larger dc levels. Remote operation of key features allows the use of the probe system in automatic test situations. The probe can be used with an oscilloscope, spectrum analyzer, or any instrument where differential probing is required and a compatible 50 Ω input is available.

   Power Requirements Voltage: 90 to 132/198 to 264 Vac, 47 to 440 Hz Power: 25 VA maximum Weight Net: approximately 1.8 kg (4.0 lb)

US-Instrument.com