Agilent/HP 1124A 100 MHz Active Probe

Agilent/HP 1124A 100 MHz Active Probe
Manufacturer: Agilent / HP
Call for pricing

 

Agilent/HP 1124A 100 MHz Active Probe

 

Agilent/HP 1124A 100 MHz Active Probe

Rent me for $50 a month

   The Agilent/HP 1124A Active Divider Probe provides high voltage, general purpose probing capabilities for instruments having 50 ohm inputs without selectable high impedance inputs. This 10 Megaohm 10pF probe allows direct measurements of 100V  in the 100:1 division ratio mode from DC to 100 MHz. In the 10:1 division ratio mode, input voltage range is ±10V. Power is supplied by instruments with Agilent/HP probe power jacks or the Agilent/HP 11899A probe power supply. This probe requires external power found on certain Agilent/HP models or a external supply to operate.  

Features

  • DC to 100MHz.
  • 50ohms impedance.
  • 3.5ns of transition time.
  • 5% peak to peak.

Specifications (Measured when connected to a 50 ohm load)

  • Bandwidth: (measured from a terminated 50 ohm source) de-coupled, dc to 100 MHz; ac-coupled, 2 Hz to 100 MHz.
  • Pulse response: (measured from a terminated 50 ohm source) transition time, <3.5 ns; perturbations, 5% p-p. Measured with pulse transition time of > 2.5 ns. Attenuation ratio: 10:1 ±5%; 100:1 ±5%.
  • Dynamic range: x 10, ±10 V; x 100, ±100 V.
  • Input RC: 10 Mohm shunted by « 10 pF.
  • Maximum safe input de-coupled: x 10, ±300 V (dc + peak ac) <100 MHz; x 100, ±500 V (dc + peak ac) < 100 MHz. ac-coupled: x 10, ±300 V (dc + peak ac) <100 MHz; dc component must not exceed ±200 V; x 100, ±500 V (dc + peak ac) 100 MHz; dc component must not exceed ±200 V.
  • Power: supplied by instruments with probe power jacks or the HP 1122A probe power supply.
  • Weight: net, 0.2 kg (5 oz); shipping, 0.91 kg (2 lb).
  • Length: 1.5 m (5 ft) overall.

US-Instrument.com