Agilent/HP 11722A Sensor Module

Agilent/HP 11722A Sensor Module
Manufacturer: Agilent / HP
Call for pricing

New Page 1


Agilent 11722A Sensor Module

Rent me for $350 a month

With the 11722A Sensor Module, you get all the performance of the Modulation Analyzer, plus superb power measurement accuracy, at a single connector. You can characterize a signal without manually switching between the power sensor and the analyzer¿s RF input. Low Input SWR and Insertion Loss Special care is taken with each sensor module to minimize input SWR and resulting errors. A low SWR attenuator isolates the power sensor from the source under test, reducing mismatch. Microwave hardware and a selected RF input cable further improve SWR and insertion loss.

Zero the Sensor with One Keystroke

You can zero the 11722A power sensor without removing it from the source under test. Just push the 8901B ZERO key. After eight seconds, zeroing is completed and the new zero offsets are stored automatically.

Individually Calibrated

Each 11722A Sensor Module is individually calibrated, traceable to the U.S. National Bureau of Standards. The calibration factors are printed on the sensor module for easy reference. Enter these factors into the 8901B nonvolatile memory and the instrument automatically compensates for the power sensor efficiency and mismatch loss at each frequency, interpolating where necessary.

Agilent 11722A Sensor Module


100 kHz to 2.6 GHz


+30 dBm (1 watt) to ¿20 dBm (10 μW)

  • INPUT SWR (CONNECTED TO AN 8901B): <1.15,

for RF Power Measurements


+30 dBm to +20 dBm Negligible deviation, levels <+20 dBm


Each 11722A Sensor Module is individually calibrated. The calibration factors are printed on the 11722A Sensor Module for easy reference.