Acterna TPI 750 OC-3C ATM Tester

Acterna TPI 750 OC-3C ATM Tester
Manufacturer: JDSU/Acterna/TTC /WG
Call for pricing

New Page 1

 

Acterna TPI 750 OC-3C ATM Tester 

Rent me for $500 a month

With Singlemode and FC Optical connectors

 

The Single Test Solution for ATM Field Testing
    
  Acterna's ATM Test Set is an easy-to-use instrument for service providers, end users, manufacturers and network integrators tasked with 
provisioning and troubleshooting ATM networks and equipment. The TPI 750 is the latest addition to a Acterna ATM testing product line that 
already has solutions aimed at the interswitch backbone environment (T-Berd 310), local area networks (Fireberd 500) and data center 
production test, and research and development operations.
 
Features  
     
 ATM and physical layer analysis over multiple interfaces: DS1, E1, ATM-25, E3, DS3, OC3c, STS3c and STM-1 (electrical and optical)   
  Bit error rate (BER) testing for all interfaces   
  Statistics for layer one events such as loss of signal (LOS) and frame synchronization   
  Ability to transmit and receive up to 6 PVC or 4 SVC/PVC test-cell streams   
  Provides quality of service (QoS) measures as defined in the ANSI, ITU and ATM Forum service standards   
  With dual processors installed, two interfaces can be configured and tested independently   
  IP Suite 
Typical Usage
 Install and turn up ATM circuits over 1.5M, 2M, 25M, 34M, 45M, and 155M links   
  Fault locate ATM circuits over 1.5M, 2M, 25M, 34M, 45M   
  and 155M links   
  Troubleshoot ATM circuits over 1.5M, 2M, 25M, 34M, 45M and 155M links   
  Perform QoS measurements over all ATM circuits   
  Validate service level agreements   
  Validate per call routing of SVC ATM circuits   
  Validate performance of ATM devices   
  Check connectivity using IP PING   

Tele-Path Instruments, a division of Acterna has launched the TPI 750 ATM analyzer, which focuses on physical layer testing for asynchronous transfer mode network buildout and troubleshooting applications that field technicians typically perform.

The TPI 750 is the latest addition to a  ATM testing product line that already has solutions aimed at the interswitch backbone environment (T-Berd 310), local area networks (Fireberd 500) and data center, production test, and research and development operations (Fireberd 6000).

The TPI 750's standard features include quality-of-service measurements, selectable header data, auto detection and user-selectable cell stream parameters.

US-Instrument.com