Quadtech 7600 Plus Precision LCR Meter
Quadtech 7600 Plus Precision LCR
Meter
Available for rentals and leases
please call
The Quadtech 7600 Plus LCR Meter performs precision
impedance measurements over a frequency range of 10 Hz to 2 MHz.
The instrument can measure 14 different impedance parameters with
0.05% accuracy, meeting today's requirements for component and
material testing. The ease of use and user-friendly menu
programming makes the 7600 Plus ideal for applications in product
development, incoming inspections, or production line testing.
Features
- Measures 14 Impedance Parameters (2 simultaneously)
- 0.05% Basic Measurement Accuracy
- Programmable Frequencies from 10Hz to 2MHz
- AC Test Voltage Programmable from 20mV to 5V
- DC Bias Voltage, 2V Internal or 0 to 200V External
- Fast Measurement Speeds up to 120/Second
- Automatic Open/Short Zeroing Eliminates Connection Errors
- High Resolution LCD with 7 Digit Display
- 14 Hi/Lo Sorting Bins for Pass/Fail Testing
- RS-232, USB, Printer, IEEE-488 optional and PLC Interfaces all
Standard
- Results Displayed as Deviation or %Deviation from a Nominal
Value
- Internal Storage and Recall of Test Setups
- Constant Voltage Maintained to the Device Under Test
- Ability to Automatically Perform 6 Unique Tests in
Sequence
- Keypad Lockout Prevents Changes to the Test Setup
- On site calibration with NIST Traceable Cal Kit
- Programmable Average and Delay Times
14 Different Impedance Parameters
Measure and display any two parameters
simultaneously to achieve coverage and flexibility not previously
available. Automatic Test Sequencing: Run up to six different tests
in sequence with a single push of the start button. Each test can
have different conditions and limits.
Swept Measurements
Fast and accurate swept parameter measurements,
graphical or tabular, for verification of component and material
response to changes in AC test frequency, AC test voltage, or AC
test current without the need for complex programming or an
external controller.
Program and Data Storage
Test setups can be stored and recalled from either
internal memory or from standard USB memory stick. The front panel
can be locked out with password protection to ensure procedures are
run the same way every time. Measured data can be stored on a USB
memory stick in CSV format and then transferred to PC for data
reduction and analysis.
Load Correction
Substantially improves instrument accuracy by
performing measurements on a known standard and applying correction
to subsequent measurements. Ideal for repetitive testing of
identical devices at like test conditions.
Automatic Calibration Procedure
The 7600 Plus can be calibrated without returning
the unit to the factory using the NIST traceable QuadTech
Calibration Kit, reducing downtime and calibration costs.
Easy to Use
Large LCD graphics display and user friendly menu
driven interface allows the 7600 Plus to be put on line fast,
providing useful measurements by operators with little or no
training.
US-Instrument.com