Quadtech 1030S 8 Channel AC/DC Hipot Test Set

Quadtech 1030S 8 Channel AC/DC Hipot Test Set
Manufacturer: Quadtech
€3555.00
Quadtech 1030S 8 Channel AC/DC Hipot Test Set

 

Quadtech 1030S 8 Channel AC/DC Hipot Test Set

Rent me for $400 a month

   The Quadtech Guardian 1030S AC/DC/IR/SC Hipot Tester has all of the features of the Guardian 1030 plus eight HV Scan Channels for multi-point testing.

Quick Discharge

   In both the DC hipot and IR tests the device under test is discharged back through the HV transformer. This technique results in a rapid and safe discharge.

Ground Continuity Check

   All of the Guardian 21 Series units have a ground continuity check feature to determine that the resistance, between the ground blade of the power cord and any exposed metal on the product, is less than 1 ohm.

   The Quadtech Guardian 1030s has eight HV Scan Channels for multi-point testing. UL, CSA, TUV, VDE, CE. The Guardian 1030s can be incorporated into an automated manufacturing environment with remote start and GO/NOGO results output through the rear panel PLC interface.

Features

  • AC Hipot Voltage 50 to 5000VAC, Output Current to 30mA
  • DC Hipot Voltage 50 to 6000VDC, Output Current to 10mA
  • IR Measurements from 100kΩ to 50GΩ, Voltage: 50 to 21VDC
  • Built-In 8 Channel Scanner for Multi-Point Testing (1030S)
  • Measure Real and Total Current
  • Programmable Hi/Lo Limits for Pass/Fail Testing
  • Ground Continuity Check with High Limit of 1 Ohm
  • Ability to Perform Multiple Tests in Sequence
  • Large LCD Display for Menu Programming and Test Results
  • Internal Storage and Recall of 99 Test Setups
  • Programmable Ramp and Test Times
  • Front Panel Lockout Prevents Changes to the Test Setup
  • Automatic Offset to Zero Out Residual Current
  • Fast Cutoff and Quick Discharge of Device Under Test
  • RS-232 and I/O Interfaces Included Standard
  • GPIB and Printer Interfaces Optional
  • Built-In Operator Prompted Software Calibration Routine
  • Guardian 1010 and 1030: UL Listed and CE Marked

Typical Applications

  • Production Testing of Appliances, Instruments and Information Technology Equipment in Accordance with UL,IEC,TÜV and Other Standards such as EN60335, EN60950, EN61010, CSA C22.2 No. 1010.1, UL3111 and UL1950
  • Transformer electrical safety testing
  • Generator/motor safety testing
  • Non-electronic safety testing
  • Appliance electrical safety testing
  • Medical electrical safety testing

US-Instrument.com