Convex 806A Portable TIMS Test Set

Convex 806A Portable TIMS Test Set
Manufacturer: Convex


Convex 806A Portable TIMS Test Set


Convex 806A Portable TIMS Test Set

Rent me for $400 a month

Designed as a direct but improved replacement for the obsolete Agilent/HP 4934A

 The Convex 806A supports a wide range of services including: POTS, DATA, Program, DDS, DSL (ISDN basic rate), and T1 via HDSL. It measures: LEVEL, DELAY, FREQUENCY, NOISE, NOISE with TONE, S/N RATIO, NOISE to GROUND, IMPULSE NOISE, IMPULSE NOISE with TONE, and IMPULSE NOISE to GROUND per IEEE Standard 743-1995. The 806A is easy to operate from the front panel (or from a personal computer) and it has AUTO-TEST capability for VF, DSL and HDSL facilities. It is also accurate, rugged and economical STRAIGHTAWAY DELAY Expanded use of 2 Wire transmission (FAX, Modem, ISDN DSL, and HDSL) has accentuated the need for a 2 Wire, STRAIGHTAWAY Envelope Delay Distortion (EDD) Measurement. The 806A introduces a new, Patented EDD Technique which: handles VF, DSL, and HDSL Frequencies; measures on a 2 wire basis; is comparable to, and compatible with the Standard 4 Wire EDD Measurement.

   Extended Round Trip Delay was added to facilitate alignment of delay lines in Simulcast Radio Systems. NOISE is measured with one of eight weighting filters. Noise-to ground (or Power Influence) is measured directly using standard test leads. A 1010 Hz Notch Filter is provided to measure NOISE-with-TONE, Signal to Noise Ratio, or Signal to Total Distortion Ratio.

Filter Applications
  • C MSG POTS Voice Traffic
  • D filter POTS modem or fax
  • 3.4 kHz POTS power line / ringing interference
  • 15 kHz POTS Level, Delay, EDD / Program Noise
  • 1010 Notch POTS S/N Ratio / Noise, S/N on PCM
  • E Filter ISDN (DSL) Level and Noise / DDS
  • F Filter HDSL Level and Noise, S/N Ratio
  • 200 kHz ISDN (DSL) and DDS Attn Dist, EDD
  • 500 kHz HDSL Level, Attenuation Distortion, EDD

   Front panel controls are simple and utilize large bright LED displays and indicators which are grouped for ease of use. The Convex 806A comes with software that runs under DOS or Windows. The PC communicates with the test set through an RS-232 Port which is located on the side or rear of the test set. The 806A is really nicely built and a perfect replacement for aging or broken 4934A's