KeyTek ECAT Model E502B SURGE SIMULATOR MODULE

KeyTek ECAT Model E502B SURGE SIMULATOR MODULE
Manufacturer: Keytek
Call for pricing
KeyTek ECAT® Model E502B SURGE SIMULATOR MODULE

 

KeyTek ECAT® Model E502B SURGE SIMULATOR MODULE

   Plug-in module to produce the telecommunications surge wave required by IEC 621-4-5, FCC Part 68 and ITU Rec K.17, K.20, and K.21 (formerly CCITT)

Options

  • E502B-VI - adds voltage and current monitoring

ELECTRICAL

    Open-Circuit Voltage

  • 10/700µs and 0.5/700µs, 200V - 6.6kV ±10% in 1 volt steps.10/700µs waveform meets both IEC and FCC Part 68 9/720µs requirements. Tighter tolerances for front time and duration ensure compliance with both requirements
  • Short-Circuit Current

  • Open-circuit voltage &devide; 15 with 0 ohm effective source impedance; open-circuit voltage ÷ 40 with 25 ohm effective source impedance. Tolerance is -0/+10%
  • Front time tolerance

  • Voltage: 7.0µs to 11.7µs
  • Current: 5.0µs ±30%
  • Duration

  • Voltage: 576µs to 840µs
  • Current: 320µs ±20%
  • Surge Repetition Rate

  • 1 shot/18 seconds
  • Minimum System Requirements

  • E100 Series control center with blank plug-in module (if no other half-width module is ordered)

US-Instrument.com