Go to Our Web Site    
This is our product index page. Please use this
keyword searching to narrow down the result.
   Advanced Search
US INSTRUMENT SERVICES - Test Equipment Rental, Sales and Service (800)870-0787 / (817)481-1666
 
<%-- ************************************************************ HTML Content Started Here ************************************************************ --%>
Category  : Power Supplies

Mfg. Name Mfg. Part# Product Unit Price Add To Cart
 
Agilent / HP E3615A Agilent /HP E3615A 60 Watt 20V at 3A Contact Sales
Agilent/HP E3615A 60 Watt 20 Volt 3 Amp Power Supply

 

Agilent/HP E3615A 60 Watt 20 Volt 3 Amp Power Supply

Rent me for $100 a month

20 Volts at 3 Amps

The Agilent/HP E3615A 60 watt power supply is used when you need a hefty power supply for your bench with clean, stable power. In addition to constant current and constant voltage modes, you get adjustable overvoltage protection, remote analog programming, front/rear output terminals and remote sensing that automatically compensates for voltage drops.

Features

  • 60W Single output
  • Constant voltage (CV) and Constant current (CC) modes
  • Front and rear output terminals
  • Auto-parallel, Auto-series and Auto-tracking operation
  • 10 turn voltage and current adjust potentiometers
  • Overvoltage protection, remote analog programming, and remote sensing

   The E3615A series of low-cost benchtop power supplies give you the performance of system power supplies without the high price. All E3615A family members give you clean power with dependable regulation and fast transient response.

   These flexible 60-watt, single-range power supplies can be used as either voltage or current sources. When output terminal voltage increases to a preset shut-down level, an overvoltage protection circuit disables the output to protect the device under test (DUT) from damage. The overvoltage protection feature is easily monitored and adjusted from the front panel. Using remote sensing capability, these instruments automatically compensate for voltage drop in the load leads, so you get accurate voltage at the DUT. You can combine multiple units in auto-parallel, auto-series and autotracking configurations for greater output voltage or current capacity. Front and rear output terminals allow flexible configuration. Output voltage and current can be controlled with external 0- to10-volt analog voltage or variable resistance.

   All E3615A series single-output power supplies feature separate digital-panel meters for monitoring voltage and current simultaneously, giving you precise reading and control capability. All models feature 10-turn potentiometers for accurate adjustment of voltage and current output settings. With 0.01 percent load and line regulation, these instruments keep the output steady when power line and load changes occur. The low normal-mode noise specification of less than 200μVrms ensures clean power for precision circuitry. In all single-output models, either the positive or negative terminal can be connected to ground, providing a positive or negative voltage output. Outputs can also be floated up to 240V from ground.
 
Agilent / HP 6012A Agilent 6012A $895.00
Agilent 6012A this one is missing a knob cap. The 6012A Autoranging Power Supply provides maximum output power capability over a wide and continuous range of voltage or current. This function is performed automatically, requiring no range selection by the operator. The 6012A offers the following features: Autoranging output: 0 to 60 V @ 0 to 50 Amps (1000 Watts) High efficiency, compact and lightweight Fast remote programming Designed for system applications Ten-turn voltage and current controls Operating mode status indicators Large, easy-to-read voltage and current meters
 
Agilent / HP 6033A Agilent 6033A 20 Volt 30 Amp Power Supply $995.00
Agilent 6033A 20 Volt 30 Amp Power Supply

 

Agilent 6033A 20 Volt 30 Amp Power Supply

Rent me for $150 a month 

   The Agilent/HP 6033A is a Single-Output Autoranging Power Supply that will save you rack space by using fewer outputs, and reduce cost by using fewer power supplies. Industry standard SCPI commands and VXIPlug&Play drivers make system integration easy. Using the serial link, up to 16 power supplies can be connected through one GPIB address. These power supplies have excellent electrical efficiency, making them a good choice for large systems.

Features

  • 242 Watts
  • Rated at 20 V at 30 A
  • "One-Box" solution: includes V and I read-back
  • Standard Commands for Programmable Instruments (SCPI)
    •
  • Autoranging output
  • VXI plug&play drivers
  • Ripple & noise (voltage/rms peak-peak/current rms): 3 mV/30 mV
  • Voltage accuracy: 0.07% +6 mV
  • Load regulation: 2 mV; 9 mA
  • HP-IB interface
  • 104-127 Vac; 48-63 Hz operation
  • Weight: 21 lb; Size: 177 mm (6.97 in)H x 212 mm (8.36 in)W x 444 mm (17.9 in)D

   The Agilent/HP 6033A is part of the 603x family of power supplies which provide a wide and continuous range of output voltage and current levels at the rated power output. They provide great flexibility for applications with varied or changing needs. This series of 200 watt and 1000 watt dc power supplies take the place of multiple power supplies in your test system by providing maximum power at a variety of operating points.

 
Agilent / HP 6034A Agilent 6034A 60 Volt 10 Amp Power Supply $995.00
New Page 1

 

Agilent 6034A 60 Volt 10 Amp Power Supply

Rent me for $150 a month

Features and Specifications
  •  Voltage: 0 to 60 Vdc
  •  Current: 0 to 10 A
  •  Ripple & noise (voltage/rms peak-peak/current rms): 3 mV/30 mV/5 mA
  •  Voltage accuracy: 0.07% +28 mV
  •  Load regulation: ±0.01% ±3 mV; ±0.01% +3 mA
  •  HP-IB interface
  •  104-127 Vac; 48-63 Hz operation
  •  Weight: 20 lb; Size: 133 mm (5.2 in)H x 426 mm (16.75 in)W x 427 mm (16.6 in)D

 

The 6034A 200 Watt Power Supply  is rated at 60 V @ 10 A and features complete HP-IB programming of voltage (15 mV/12 bit resolution), current (2.5 mA/12 bit resolution), and Overvoltage protection limit Allows output voltage and current to be read via the HP-IB Full operating status readback Autoranging output: 0 to 60 Volts, 0 to 10 A (200 Watts) Service request capability Built-in self tests and diagnostics for continuous reliability.
 
Agilent / HP 6228B Agilent 6228B Dual 50 Volt 1 Amp Power Supply $499.00

Agilent 6228B Dual 50Volt 1 Amp Power Supply

The Agilent 6228B power supply combines the versatility of a dual power supply with the flexibility of auto-series and auto-parallel operation, each supply can deliver the maximum-rated output voltage or current of each section.

Features

  • Dual power supply
  • Auto-series, auto-parallel operation
  • Auto-tracking
  • Output ratings (0 - 55 deg C): 0-50 V, 0-1 A
  • Ripple and noise (20 Hz to 20 MHz): CV: 250 uV rms, 4 mV peak-to-peak; CC: 250 uA rms, 2 mA peak-to-peak
  • Load regulation: 0.01% + 1 mV, 0.01% + 250 uA
  • Line regulation: 1 mV, 100 uA
  • Physical Specifications: Weight: 11 kg (24 lb)


 
Agilent / HP 6622A Agilent 6622A 2 output 80 Watt Power Supply $1,249.00
Agilent/HP 6622A 80 Watt Dual Power Supply

 

Agilent/HP 6622A 80 Watt Dual Power Supply

Rent me for $100 a month

   The Agilent/HP 6622A is dual-output, GPIB system power supply. The dual voltage outputs provides 20 volts at 4 amps or 50 volts at 2 amps on the high range. The linear low noise power supply outputs combine with a built in GPIB interface. Simple programming commands ease access to all features and capabilities. Dual ranging outputs provide greater flexibility in available voltage and current.    Programming is done using industry standard SCPI commands. Test system integration can be further simplified be using the VXIPlug&Play drivers. These power supplies help reduce test time with fast up and down programming, which is enhanced by an active downprogrammer which can sink the full rated current.

   Two isolated outputs are integrated into one package, conserving rack space and GPIB addresses. Dual ranges allow for more current at lower voltage levels. The outputs can be connected in parallel or series to further increase the flexibility that these products offer the system designer. Programming is done using industry standard SCPI commands and test system integration can be further simplified be using the VXIPlug&Play drivers. These power supplies help reduce test time with fast up and down programming, which is enhanced by the active down-programmer which can sink the full rated current. These power supplies are very useful on the R&D bench. The accuracy of both the programming and the measurement systems allow precise control and monitoring of prototype bias power. The extensive protection features protect valuable prototypes, including very fast CV/CC crossover. The power supply can be controlled from either the front panel keypad or, for automated testing, from the GPIB.


Features

  • GPIB programming of voltage and current
  • Measured voltage and current read-back over the GPIB
  • Two outputs can be connected in parallel or in series
  • Automatic selection of operating voltage and current range
  • Programmable over-voltage and over-current protection
  • Self-test occurs at power-on from an GPIB command
  • Electronic calibration via GPIB
  • 10 store-recall states
  • SCPI (Standard Comments for Programming Instruments)
  • VXI plug&play drivers
  • DC Floating Voltage: All outputs can be floated up to ±240 Vdc from chassis ground
  • Remote Sensing: Up to 1 V drop per load lead. The drop in the load leads is subtracted from the voltage available for the load.
  • Command Processing Time: 7 ms typical with front-panel display disabled
  • Down Programming: Current sink limits are fixed approximately 10% higher than source limits for a given operating voltage above 2.5 V
  • Input Power: 550 W max., 720 VA max.
  • GPIB Interface Capabilities: SH1, AH1, T6, L4, SR1, RL1, PP1, DC1, DT0.
  • Regulatory Compliance: Listed to UL1244; conforms to IEC 61010-1; carries the CE mark.
  • Size: 425.5 mm W x 132.6 mm H x 497.8 mm D (16.75 in x 5.22 in x 19.6 in)
  • Weight: Net, 17.4 kg (38 lb); shipping, 22.7 kg (50 lb)
  • Programming is done using industry standard SCPI commands.
  • Test system integration can be further simplified be using the VXIPlug&Play drivers.
  • These power supplies help reduce test time with fast up and down programming, which is enhanced by an active downprogrammer which can sink the full rated current.
     
 
Agilent / HP 66311B Agilent 66311B 15 Volt 3 Amp Mobile Communications DC Source $1,395.00
Agilent/HP 66311B Power Supply

 

Agilent/HP 66311B 15 Volt 3 Amp Mobile Communications DC Source

 

Rent me for $150 a month

 

The Agilent 66311B mobile communications DC source provides fast transient, exceptional sourcing, and precision measurement. This product is specially designed for testing digital wireless communications products. The 66311B mobile communications DC source offers a new capability to automatically detect open sense connections. This new feature is an Agilent proprietary technology that helps test engineers avoid improper remote voltage settings and guarantees correct calibration of charger circuitry of the device-under test.

Features

  • 5 A peak current sourcing for next generation data transmission formats
  • Excellent transient voltage response characteristics prevent test interruptions due to triggering low voltage phone shutdown
  • Up to 2.8 A current sinking to test built-in battery chargers
  • Fast transient response, rapid command processing, and high speed output programming time maximize manufacturing test throughput
  • Low power supply output noise assures less interference with phone operations
  • Precision µA measurement for "sleep mode" characterization
  • Dynamic current pulse measurements for battery loading information
  • Precision voltage measurement for accurate tracking of charger voltage levels
  • Automatically detects open sense wire connections

  • Ideal for testing wireless and battery powered devices

  • 20 to 30 times improvement in test throughput over general purpose dc sources

  • Superior output transient performance with short or long load leads (up to 6 meters)

  • Dynamic measurement system for accurate battery current drain measurement

 

Overcome Battery Powered Device Testing Challenges

Digital communications devices and digital battery powered devices present a unique testing challenge: they draw rapid pulses of current. By offering superior transient performance, unmatched in the marketplace, the Agilent Mobile Communications dc Sources dramatically reduce the transient voltage drop due to pulse loading characteristics of digital communications devices. The Agilent Mobile Communications dc Sources enable you to maximize test throughput by minimizing test interruption due to false trigger of device low voltage shutdown.
 
Agilent / HP 6644A Agilent 6644A 60 V 3.5 A Power Supply $995.00

Agilent 6644A 200 Watt System Power Supply rated at 60V at 3.5A

The Agilent 6644A is one of the 664x series of 200 Watt, single output, series pass regulated power supplies, with an internal GPIB interface and SCPI programming. These models provide many talker/listener functions including remote programming of voltage and current with feedback of actual measured output values. 16 supplies can be connected to one GPIB interface via a serial link connection.

Features

Valuable assemblies can be destroyed by a minor component failure that can allow a surge of voltage or current to flow to the DUT. Fast protection features, including fast crowbar, mode
crossover protection, and the ability to connect the protection circuitry of multiple power supplies can increase production yield. Programming of the dc output and the protection features can be done either from the front panel or using industry standard SCPI commands, via the GPIB. Using the serial link, up to 16 power supplies can be connected through one GPIB address. Test system integration can be further simplified be using the VXIPlug&Play drivers. The output voltage and current can also be controlled with analog signals. This is helpful for certain types of noisy environments, and also immediate reactions to process changes. Lab bench use is enhanced by the fan speed control, which helps to minimize the acoustic noise.

Operational features include:

Constant voltage (CV) or constant current (CC) output over the rated output range.
Built-in overvoltage (OV), overcurrent (OC), and overtemperature (OT) protection.
Automatic turn-on selftest.
Pushbutton nonvolatile storage and recall of up to 5 operating states (4 in Series 668xA/669xA supplies).
Local or remote sensing of output voltage.
Auto-parallel operation for increased total current.
Series operation for increased total voltage.
Analog input for remote programming of voltage and current.
Voltage output for external monitoring of output current.
User calibration from the front panel.
Front Panel Programming
The front panel has both rotary (RPG) and keypad controls for setting the output voltage and current. The panel display provides digital readouts of the output voltage and current. Other front panel controls permit:
Enabling or disabling the output.
Setting the overvoltage protection (OVP) trip voltage.
Enabling or disabling the overcurrent protection (OCP) feature.
Saving and recalling operating states.
Setting the GPIB address.
Reading GPIB error message codes.
Calibrating the power supply, including changing the calibration protection password.
 
Agilent / HP 6652A Agilent 6652A 20 Volt 25 Amp Power Supply $1,495.00
New Page 1

 

Agilent 6652A 20 Volt 25 Amp Power Supply

 

Rent me for $300 a month

 

The Agilent 6652A is one of the 665x series of 500 Watt, single output, series pass regulated power supplies, with an internal GPIB interface and SCPI programming. These models provide many talker/listener functions including remote programming of voltage and current with feedback of actual measured output values. 16 supplies can be connected to one GPIB interface via a serial link connection.

Features

  • Auto-parallel up to three units
  • Outputs can be connected in parallel or in series
  • Programmable over-voltage and over-current protection
  • Over-temperature protection
  • Discrete Fault Indicator/Remote Inhibit (DFI/RI)
  • Self-test occurs at power-on from a GPIB command
  • User definable power-on state
  • VXI plug&play drivers

 
 
Agilent / HP 6655A Agilent 6655A 120 Volt 4 Amp Power Supply $1,995.00
Agilent/HP 6655A 120 Volt 4 Amp Power Supply

 

Agilent/HP 6655A 120 Volt 4 Amp Power Supply

Rent me for $250 a month

  The Agilent/HP 6655A models are 500 Watt, single output, series pass regulated power supplies, with an internal GPIB interface and SCPI programming. These models provide many talker/listener functions including remote programming of voltage and current with feedback of actual measured output values. 16 supplies can be connected to one GPIB interface via a serial link connection.

Features

  • Auto-parallel up to three units
  • Outputs can be connected in parallel or in series
  • Programmable overvoltage and overcurrent protection
  • Overtemperature protection
  • Discrete Fault Indicator/Remote Inhibit (DFI/RI) Self-test occurs at power-on from an GPIB command
  • User definable power-on state VXI plug&play drivers
  • Output ratings (0 - 55 deg C)
  • Output voltage: 0-120 V
  • Output current: 0-4 A
  • Maximum current: 3.6 A / 3.4 A
  • Programming accuracy (at 25 deg C ± 5 deg C) Voltage: 0.06% + 51 mV Current: 0.15% + 4 mA

   This series of 500 W linear-regulated dc power supplies is designed to maximize the throughput of DUTs through the manufacturing test process with fast up and down programming time. Valuable assemblies can be destroyed by a minor component failure that causes a surge of current to flow into the DUT. Fast protection features, including fast crowbar, mode crossover protection, and the ability to connect the protection circuitry of multiple power supplies can increase production yield. Programming of the dc output and the protection features can be done either from the front panel or using industry standard SCPI commands, via the GPIB. Using the serial link, up to 16 power supplies can be connected through one GPIB address. Test system integration can be further simplified be using the VXIPlug&Play drivers. The output voltage and current can also be controlled with analog signals. This is helpful for certain types of noisy environments, and also immediate reactions to process changes. Lab bench use is enhanced by the fan speed control, which helps to minimize the acoustic noise.

Supplemental Characteristics for the 6655A

  • Average resolution Voltage: 30 mV
  • Current: 1.25 mA OVP: 190 mV OVP accuracy 2.4 V

Physical Specifications for the 6655A

  • Dimensions 425.5 mm W x 132.6 mm H x 497.8 mm D (16.75 in x 5.22 in x 19.6 in)
  • Net Weight 25 kg (54 lbs)
  • Shipping Weight 28 kg (61 lbs)

 
 
Agilent / HP 6681A Agilent 6681A 8 Volt 580A Power Supply Contact Sales
New Page 1

 

Agilent 6681A 8 Volt 580A Power Supply

Rent me for $500 a month

Reliable power and easy integration for manufacturing test

The 6681A low-noise supply provide stable and reliable DC power enhanced with extensive protection features. They are also a great choice for long-term burn-in applications.

  • Perform remote programming using the GPIB interface and SCPI command set
  • Enhance measurement accuracy with low ripple and noise
  • Utilize selectable compensation to enable trouble-free powering of inductive loads
  • Control up to 16 supplies through one GPIB address via serial link system
  • Use built-in measurement system to provide DMM-quality voltage and current readings
  • Protect DUTs quickly and automatically with overvoltage and overcurrent features
  • The 6681A is powered by a three phase input connection at 208 volts

Reliable dc power for manufacturing test and long-term burn-in

   This series of 5000 watt dc power supplies has the exceptional, proven reliability that test system engineers look for. It also has the features needed for easy test system integration. Programming of the dc output and the extensive protection features can be done either from the front panel or using industry standard SCPI commands, via the GPIB. Using the serial link, up to 16 power supplies can be connected through one GPIB address. Test system integration can be further simplified by using the VXIPlug&Play drivers.

   The output voltage and current can also be controlled with analog signals. This is helpful for certain types of noisy environments, and also immediate reactions to process changes.

   The 6681A has extremely low ripple and noise for a 5000 watt dc power supply. This helps the built-in measurement system make extremely accurate current and voltage measurements.

AC Input (47 to 63 Hz): 180 to 235 Vac (line-to-line, 3 phase), 27.7 A rms maximum worst case, 21.4 A rms nominal; 360 to 440 Vac, 14.3 A rms maximum worst case, 10.7 A rms nominal (maximum line current includes 5% unbalanced phase voltage condition.)

  • Output voltage derated 5% at 50 Hz and below 200 Vac.

  • Input Power: 7350 VA and 6000 W maximum; 160 W at no load

  • GPIB Interface Capabilities: SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, E1, and C0. IEEE-488.2 and SCPI command set.

  • Size: 425.5 mm W x 221.5 mm H x 674.7 mm D (16.75 in x 8.75 in x 25.56 in)

  • Weight: Net, 51.3 kg (113 lbs); shipping, 63.6 kg (140 lbs)

 

 

 
 
Agilent / HP E3630A Agilent E3630A $449.00
New Page 1

 

Agilent E3630A 35W Triple Output Power Supply

6V at 2.5A and  ±20V at 0.5A

New Instek GPS-3303 is a good substitute

The Agilent E3630A 35-watt triple-output power supply provides three DC outputs: 0 to 6 V with a maximum current of 1 to 2.5A and 0 to 20 V and 0 to -20 V with a maximum current of 0.5A. An auto-tracking feature lets you use one voltage control to adjust the +20 V and -20 V outputs simultaneously. The outputs track each other to within 1 percent, making it easy to adjust the power supply circuits requiring balanced voltages.

Affordable, clean, reliable, power for your bench top.

Features

  • 35 W triple output
  • Constant voltage (CV) and Current limit (CL) modes (±20V)
  • Constant voltage (CV) and Current foldback (CF) modes (+6V)
  • Low noise and excellent regulation
  • Digital voltage and current meters
  • Output tracking

The 35-watt E3630A triple- output power supply provides three dc outputs: 0 to 6 V with a maximum current of 1 to 2.5A and 0 to 20 V and 0 to -20 V with a maximum current of 0.5A. An autotracking feature lets you use one voltage control to adjust the +20 V and -20 V outputs simultaneously. The outputs track each other to within 1 percent, making it easy to adjust the power supply for circuits requiring balanced voltages.

With multiple supplies in a compact unit, the and E3630A give you excellent performance while saving space on your bench. Both instruments feature tight 0.01 percent line and load regulation and a low normal-mode noise specification of less than 0.35mV to ensure clean power for precision circuitry. With a common-mode current specification of less than 1uA, both multiple-output power supplies minimize power line current injection. Like the single-output models in the E3600 series, the E3630A feature separate digital panel meters so you can monitor voltage and current simultaneously. They also protect your DUT against overload and short-circuit damage. Smooth turn-on and turn-off transitions keep power spikes out of your circuits.

 

 
 
Agilent / HP E3631A Agilent E3631A Triple Output Power Supply $1,099.00
Agilent/HP E3631A 80 W Triple Output Power Supply
Agilent/HP E3631A 80 W Triple Output Power Supply
Rent me for $125 a month

6V at 5A & ±25V, 1A
   The Agilent E3631A 80-watt triple-output power supply provides three dc outputs: 0 to 6 V with a maximum current of 0 to 5A and 0 to 25 V and 0 to -25 V with a maximum current of 1.0A. An auto-tracking feature lets you use one voltage control to adjust the +25 V and -25 V outputs simultaneously. The outputs track each other to within 1 percent, making it easy to adjust the power supply circuits requiring balanced voltages voltage/current noise and common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications and the low common mode current provides isolation from power line current injection.
Features
  • 80 W triple output
  • Low noise/excellent regulation
  • Front and Rear output terminals
  • GPIB/RS-232 standard
  • Isolated 6V output
  • SCPI compatible
Excellent Performance you can trust

    0.01% load and line regulation keep the output steady when power line and load change occur. The power supplies specify both normal mode voltage/current noise and common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications and the low common mode current provides isolation from power line current injection.
 

Remote Interface

If you have an IEEE-488 card or RS-232 in a PC, the E3631A power supplies will work for you. Every model comes equipped with both GPIB and RS-232 as standard. All programming is done in easy to use SCPI (Standard Commands for Programmable Instruments). The user¿s guide describes the process for first time programmers.
 

Front Panel Operation

A knob and self-guiding keypads allow you to set the output at the resolution you need for the most exacting adjustments quickly and easily. Up to three complete power supply setups can be stored and recalled from the internal non-volatile memory. The output on/off button sets the output to zero.
 
Agilent / HP E3634A Agilent E3634A $995.00

Agilent E3634A 200 W Power Supply

25V at 7A or 50V at 4A


The Agilent E3634A is a 200 W single output, dual range programmable DC power supply designed to meet the most exacting engineering requirements with traditional Agilent quality and reliability.

Features

  • 175 W / 200 W single output, dual range
  • Low noise and excellent regulation
  • Front and Rear output terminals
  • Remote Sense, OVP and OCP
  • SCPI compatible
  • GP-IB/RS-232 standard
Remote Interface
If you have an IEEE-488 card or RS-232 in a PC, these power supplies will work for you. Every model comes equipped with both GPIB and RS-232 as standard. All programming is
done in easy to use SCPI (Standard Commands for Programmable Instruments). The user¿s guide describes the process for first time programmers.
Front Panel Operation
A knob and self-guiding keypads allow you to set the output at the resolution you need for the most exacting adjustments quickly and easily. Up to three complete power supply setups can be stored and recalled from the internal non-volatile memory. The output on/off button sets the output to zero.
 
Agilent / HP 6632B Agilent/HP 6632B 20 V 5 A Power Supply $950.00
New Page 1

 

Agilent/HP 6632B 20 Volt 5 Amp Power Supply

Rent me for $150 a month

 The Agilent 6632B System dc Power Supply is an ideal power source for demanding production test applications. This dc power supply offers high performance and precision measurements in a one-box solution. To reduce test-system development time and provide precision testing, the 6632B provides current measurement down to the microamp level. The 6632B also provides high-speed programming with under 4 millisecond response time.

Features and Specifications

  • 0 to 20Vdc, 0 to 5A.
  • Programming accuracy (V/A): 0.05% +10mV / 0.05% + 2mA.
  • Load regulation: 2mV / 1mA.
  • Ripple & noise (rms/p-p): 0.3mV / 3mV.
  • Precision low current measurement,
  • Low-output noise, High-speed programming,
  • GPIB and RS-232 interfaces,
  • VXI plug & play drivers.
  • Operates from 104 to 127 Vac; 47-63 Hz operation.
  • Weight: 28 lb;
  • Size: 88mm (3.5 in)H x 426mm (16.75in)W x 364mm (14.3in)D.
  • Order option J07 for use with inductive loads.

   This series of linear-regulated 80-100 W dc power supplies is designed to maximize the throughput of DUTs through the manufacturing test process. Both programming and measurement are optimized for speed. The active downprogrammer can sink up to the full rated current of the power supply, which quickly brings the power supply output to zero volts. The 6630B Series offers many advanced programmable features including stored states and status reporting. Programming is done using industry standard SCPI commands via the GPIB or RS-232. Test system integration is further simplified by using the VXIPlug&Play drivers. The optional relays simplify system design and troubleshooting.

Supplemental Characteristics

DC Floating Voltage: Output terminals can be floated up to ±240 Vdc maximum from chassis ground

Remote Sensing: Up to two volts dropped in each load lead. Add 2 mV to the voltage load regulation specification for each one volt change in the positive output lead due to load current change.

Command-Processing Time: Average time required for the output voltage to begin to change following receipt of digital data is 4 ms for the power supplies connected directly to the GPIB. (Display disabled).

Output-Programming Response Time: The rise and fall time (10/90% and 90/10%) of the output voltage is less than 2 ms (400 μs in fast mode). The output voltage change settles within 1 LSB (0.025% x rated voltage) of final value in less than 6 ms (2 ms in the fast mode).

GPIB Interface Capabilities: IEEE-488.2,

SCPI command set and 6630A Series programming compatability
 
Agilent / HP 6012B Agilent/HP 6012B 60 Volt 50 Amp Power Supply $2,995.00
Agilent/HP 6012B 60 Volt 50 Amp Power Supply

 

Agilent/HP 6012B 60 Volt 50 Amp Power Supply

Rent me for $400 a month

Output limited to 1200 Watts total

  

The 6012B series of DC power supplies take the place of multiple power supplies on your test bench by providing maximum power at a variety of operating points. They have ten-turn front panel pots to allow precise local control. These power supplies also may be connected in auto-parallel or series as part of a test system.

Greater one-box versatility with autoranging outputs
 

These single-output supplies can replace multiple units, saving rack space and reducing system cost and complexity.

  • Autoranging outputs provide maximum power at a variety of operating points
  • Overvoltage features protect DUTs quickly and automatically
  • Auto-parallel or auto-series connections enable greater output flexibility (requires 6030 Series GPIB unit)
  • Ten-turn pots for precise local control

Description

   These power supplies are autoranging supplies. Autoranging allows the power supply to deliver full output power over a higher voltage and current combination than would be possible with a rectangular output characteristic (see figure 1-1). They use a 20k Hz pulse-width modulation circuit with power MOSFETs to provide the autoranging output characteristic with laboratory performance.

   Output voltage and current are continuously indicated on two 3 ½ digit displays. Front-panel controls allow the user to set output voltage, current and Overvoltage Protection (OVP) trip levels. OVP protects the load by quickly and automatically interrupting energy transfer if a preset voltage trip level is exceeded. Push button switches allow the display to alternately show the programmed values of voltage and current or the overvoltage limit. LED indicators show the operating state of the unit (CV, CC, Unregulated and Overvoltage).

All connections are made to rear-panel screw-on terminals.

Output voltage can be locally or remotely sensed.

    A six-position MODE switch located on the rear panel is used to change from front panel control to remote voltage or remote resistance control. See section 3 for a description of remote programming, remote sensing and several methods of multiple supply operation.

Either the positive or negative output terminal may be grounded or the output may be floated (including output voltage) up to ± 240 Vdc on the 6012B from chassis ground.

The power supply is fan cooled and is packaged in an Agilent Technologies System II-compatible modular that provides easy access for servicing. A thermostat shuts down the supply if an over-temperature condition occurs and resets automatically.
 
Agilent / HP 6030A Agilent/HP 6030A 200 Volt 17 Amp Power Supply $2,995.00
Agilent/HP 6030A 200 Volt 17 Amp Power Supply  

Agilent/HP 6030A 200 Volt 17 Amp Power Supply

Rent me for $300 a month

   The Agilent/HP 6030A is part of the 603x family of power supplies which provide a wide and continuous range of output voltage and current levels at the rated power output. They provide great flexibility for applications with varied or changing needs.

Features

  • SCPI (Standard Commands for Programming Instruments)
  • Autoranging output
  • VXI plug&play drivers

 This Agilent/HP 6030A power supply is an autoranging GP-IB power supply. It uses power MOSFETs in a 20 kHz switching converter to provide an autoranging output characteristic with laboratory performance. Output voltage and current are continuously indicated on individual meters. LED indicators show the complete operating state of the unit. Front-panel controls allow the user to set output voltage, current and overvoltage protection trip levels. Overvoltage protection (OVP) protects the load by quickly and automatically interrupting energy transfer if a preset trip voltage is exceeded. Foldback protection can be selected to disable the power supply output if the unit switches from Constant Voltage (CV) to Constant Current (CC) mode or vice-versa. The Agilent/HP 6030A power supply can be both a listener and talker on the GP-IB, and can be programmed directly in volts and amps. Power supply status can be read over the GP-IB, and the power supply can be instructed to request service for any of ten conditions. Upon command, the power supply will measure its output voltage, output current, or OVP trip voltage and put the value on the GP-IB. New output values can be put on hold and triggered later, allowing the controller to synchronize multiple power supplies at one time. The following parameters and features can be controlled via the GP-IB:

  • Output voltage setting (12 bits)
  • Output current setting (12 bits)
  • Trigger (update output)
  • Output disable/enable
  • OVP reset
  • "Soft" voltage and current limits
  • Status reporting
  • Service request capability
  • Foldback protection
  • Output voltage measurement (12 bits)
  • Output current measurement (12 bits)
  • OVP setting measurement
  • Machine state initialization
  • 16 machine state presets
  • Self test Output connections are made to rear-panel screw-on terminals.

   Either the positive or negative output terminal may be grounded or the output may be floated up to + 550 Vdc (including output voltage) from chassis ground. Output voltage can be locally or remotely sensed. The power supply is fan cooled and is packaged in an Agilent Technologies System ll-compatible modular enclosure which is sturdy, attractive and provides easy access for servicing.

 
Agilent / HP 6031A Agilent/HP 6031A 20 Volt 120 Amp Power Supply $2,995.00
Agilent/HP 6031A 20 Volt 120 Amp Power Supply

 

Agilent/HP 6031A 20 Volt 120 Amp Power Supply

Rent me for $200 a month

 

  The Agilent 6031A is part of the 603x family of power supplies which provide a wide and continuous range of output voltage and current levels at the rated power output. They provide great flexibility for applications with varied or changing needs.

Features

  • SCPI (Standard Commands for Programming Instruments)
  • Autoranging output
  • VXI plug&play drivers Remote Sensing:
  • Up to 2 V drop in each lead.
  • Voltage regulation specification met with up to 0.5 V drop, but degrades for greater drops.
  • Modulation: (analog programming of output voltage and current)
  • Input signal: 0 to 5 V or 0 to 4 k Ohms
  • Size: 6031A 425.5 mm W x 132.6 mm H x 503.7 mm D (16.75 in x 5.25 in x 19.83 in).

   This series of DC power supplies take the place of multiple power supplies on your test bench by providing maximum power at a variety of operating points. They have ten-turn front panel pots to allow precise local control. These power supplies also may be connected in auto-parallel or series with their corresponding GPIB unit (6030 Series), as part of a test system.

   This system power supply is an autoranging GP-IB power supply. It uses power MOSFETs in a 20 kHz switching converter to provide an autoranging output characteristic with laboratory performance. Output voltage and current are continuously indicated on individual meters. LED indicators show the complete operating state of the unit. Front-panel controls allow the user to set output voltage, current and overvoltage protection trip levels. Overvoltage protection (OVP) protects the load by quickly and automatically interrupting energy transfer if a preset trip voltage is exceeded. Foldback protection can be selected to disable the power supply output if the unit switches from Constant Voltage (CV) to Constant Current (CC) mode or vice-versa.

   The power supply can be both a listener and talker on the GP-IB, and can be programmed directly in volts and amps. Power supply status can be read over the GP-IB, and the power supply can be instructed to request service for any of ten conditions. Upon command, the power supply will measure its output voltage, output current, or OVP trip voltage and put the value on the GP-IB. New output values can be put on hold and triggered later, allowing the controller to synchronize multiple power supplies at one time.

Output connections are made to rear-panel screw-on terminals. Either the positive or negative output terminal may be grounded or the output may be floated up to + 240 Vdc (including output voltage) from chassis ground. Output voltage can be locally or remotely sensed.

The power supply is fan cooled and is packaged in an Agilent Technologies System ll-compatible modular enclosure which is sturdy, attractive and provides easy access for servicing.
 
Agilent / HP 6032A Agilent/HP 6032A 60V 50A Power Supply $3,795.00
Agilent/HP 6032A Power Supply 60 Volts at 50 Amps
Agilent/HP 6032A Power Supply 60 Volts at 50 Amps

Rent me for $400 a month

   The Agilent/HP 6032A system power supply is an autoranging GP-IB power supply. It uses power MOSFETs in a 20 kHz switching converter to provide an autoranging output characteristic with laboratory performance. Output voltage and current are continuously indicated on individual meters. LED indicators show the complete operating state of the unit. Front-panel controls allow the user to set output voltage, current and overvoltage protection trip levels. Overvoltage protection (OVP) protects the load by quickly and automatically interrupting energy transfer if a preset trip voltage is exceeded. Foldback protection can be selected to disable the power supply output if the unit switches from Constant Voltage (CV) to Constant Current (CC) mode or vice-versa. The power supply can be both a listener and talker on the GP-IB, and can be programmed directly in volts and amps. Power supply status can be read over the GP-IB, and the power supply can be instructed to request service for any of ten conditions. Upon command, the power supply will measure its output voltage, output current, or OVP trip voltage and put the value on the GP-IB. New output values can be put on hold and triggered later, allowing the controller to synchronize multiple power supplies at one time. Self test Output connections are made to rear-panel screw-on terminals. Either the positive or negative output terminal may be grounded or the output may be floated up to + 240 Vdc (including output voltage) from chassis ground. Output voltage can be locally or remotely sensed. The power supply is fan cooled.

Features

  • 0 to 60 Vdc
  • 0 to 50 A
  • Programming accuracy: 0.035% + 40 mV
  • Load regulation: 0.01% + 5 mV
  • Ripple & noise (rms/p-p): 8 mV / 40 mV
  • SCPI (Standard Commands for Programming Instruments)
  • Autoranging output
  • VXI plug & play drivers
  • 104 to 127 Vac; 47-63 Hz operation
  • Weight: 36 lb;
  • Size: 132.6 mm (5.25 in)H x 426 mm (16.75 in)W x 504 mm (19.8 in)
 
Agilent / HP 6038A Agilent/HP 6038A 60 Volt 10 Amp Power Supply Contact Sales
Agilent/HP 6038A 60 Volt 10 Amp Power Supply

 

Agilent/HP 6038A 60 Volt 10 Amp Power Supply

Rent me for $150 a month

  The Agilent/HP 6038A provides great flexibility for applications with varied or changing needs. The 6038A is a single autorangeing output power supply equiped with the GPIB Interface and VXI plug&play drivers. This 6038A ystem power supply is an autoranging GP-IB power supply. It uses power MOSFETs in a 20 kHz switching converter to provide an autoranging output characteristic with laboratory performance. Output voltage and current are continuously indicated on individual meters. LED indicators show the complete operating state of the unit. Front-panel controls allow the user to set output voltage, current and overvoltage protection trip levels. Overvoltage protection (OVP) protects the load by quickly and automatically interrupting energy transfer if a preset trip voltage is exceeded. Foldback protection can be selected to disable the power supply output if the unit switches from Constant Voltage (CV) to Constant Current (CC) mode or vice-versa.

   The 6038A power supply can be both a listener and talker on the GP-IB, and can be programmed directly in volts and amps. Power supply status can be read over the GP-IB, and the power supply can be instructed to request service for any of ten conditions. Upon command, the power supply will measure its output voltage, output current, or OVP trip voltage and put the value on the GP-IB. New output values can be put on hold and triggered later, allowing the controller to synchronize multiple power supplies at one time.

  The following parameters and features can be controlled via the GP-IB:

  • Output voltage setting (12 bits)
  • Output current setting (12 bits)
  • Trigger (update output)
  • Output disable/enable
  • OVP reset
  • "Soft" voltage and current limits
  • Status reporting
  • Service request capability
  • Foldback protection
  • Output voltage measurement (12 bits)
  • Output current measurement (12 bits)
  • OVP setting measurement
  • Machine state initialization
  • 16 machine state presets
  • Self test

  Output connections are made to rear-panel screw-on terminals. Either the positive or negative output terminal may be grounded or the output may be floated up to + 550 Vdc (including output voltage) from chassis ground. Output voltage can be locally or remotely sensed.

 
 
Agilent / HP 6206B Agilent/HP 6206B 60 Volt .5 Amp Power Supply Contact Sales
Agilent/HP 6206B 60 Volt .5 Amp Power Supply

 

Agilent/HP 6206B 60 Volt .5 Amp Power Supply

Rent me for $100 a month

The Agilent/HP 6206B features: 0 to 60V/0.5A, 0 to 30V/1A, 30W. CV/CL, metered. Auto series, parallel, and tracking. Remote sensing. Independent voltage controls. Short-circuit proof.
 

Features

  • Output 1 Max. power: 30 Watts
  • Output 1/Range 1 Max. Current: 1 A (0 V to 30 V)
  • Output 1/Range 2 Max. Current: 0.5 A (0 V to 60 V)
  • Voltage Ripple and Noise: 200 uV
  • Load Regulation, Voltage: 4 mV
  • Line Regulation, Voltage: 4 mV
  • Programming Resolution (% of full scale): 0.17 %

    •  
     
    Agilent / HP 6264B Agilent/HP 6264B 20 V 20 A Power Supply Contact Sales
    New Page 1

     

    Agilent/HP 6264B 20 V 20 A Power Supply

    Rent me for $150 a month

    Agilent/HP 6264B DC Power Supply 20 Volts at 20 Amps
    • Ratings: DC Output: 0 to 20 Volts; 0 to 20 Amps
    • Built-in overvoltage protection
    • Overvoltage range: 2.5 to 23 V
    • Constant voltage/constant current operation
    • Remote programming: constant voltage and constant current operation by using an external resistance or dc voltage
    • Remote sensing
    • Auto-series, -parallel, and -tracking operation
    • Standard input power: 115 VAC 12 A (230V also available)
    • Net Weight: 47 lb

     

     

     
     
    Agilent / HP 6267B Agilent/HP 6267B 40 Volt 10 Amp Power Supply Contact Sales
    Agilent/HP 6267B 40 Volt 10 Amp Power Supply

     

    Agilent/HP 6267B 40 Volt 10 Amp Power Supply

    Rent me for $100 a month

    The Agilent/HP 6267B is a general purpose, rack-mounted DC Power Supply. It features dual analog panel meters for monitoring of voltage and current and automatic switchover between Constant Voltage and Constant Current modes. Operator adjustable over voltage protection is provided. Internal Sensing, External Sensing, and remote programming is available through rear panel barrier strip connections.

    Features

    • 0 to 40 V
    • Current: 0 to 10 A
    • Constant Voltage/Constant Current Operation
    • Incorporates Separate Meters for easy Monitoring of Output
    • Built-In Overvoltage Crowbar Protection
    • Remote Error Sensing
    • Auto-Series Operation
    • Auto-Parallel Operation
    • Auto-Tracking Operation
    • Rear Panel Connections 

     
     
    Agilent / HP 6274B Agilent/HP 6274B 60 Volt 15 Amp Power Supply Contact Sales
    Agilent/HP 6274B 60 Volt 15 Amp Power Supply

     

    Agilent/HP 6274B 60 Volt 15 Amp Power Supply

    Rent me for $200 a month

     

       The 6274B series of constant-voltage/constant-current power supplies achieve high efficiency, excellent regulation, low ripple and noise, and moderate programming speeds in a compact, full rack width package. The Agilent/HP 6274B is a high-performance constant voltage/constant current power supply with an output rating of 0-60 Volts. The 6274B employs a transistor series-regulator/triac-preregulator circuit to achieve high efficiency, excellent regulation, low ripple and noise, and moderate programming speeds in a compact full-rack width package.

    Additional features on the 6274B Power Supply include built-in overvoltage crowbar protection; remote error sensing; and auto-series, auto-parallel, and auto-tracking operation. The crowbar trip point adjustment and associated overvoltage indicator are conveniently located on the front panel.

    Features

    • Output ratings (0 - 55 deg. C): 0-60 V, 0-15 A
    • Over-voltage protection Analog programmable
    • Remote sensing Auto-series, auto-parallel, and auto-tracking operation <50us load transient recovery
    • Ripple and noise (20 Hz to 20 MHz): CV: 200 uV rms, 20 mV peak-to-peak; CC: 5 mA rms
    • Load regulation: 0.01% + 200 uV, 0.02% + 500 mA Line regulation: 0.01% + 200 uV, 0.02% + 500 mA
     
    Agilent / HP 6282A Agilent/HP 6282A 10 Volt 10 Amp Power Supply Contact Sales
    Agilent/HP 6282A 10 Volt 10 Amp Power Supply

     

    Agilent/HP 6282A 10 Volt 10 Amp Power Supply

    Rent me for $100 a month

    The Agilent 6282A Power Supply family of convection cooled, 5 1/2 inch, half rack, constant-voltage, constant-current power supplies is available in a 100 Watt power ranges. All models have individual voltage and current controls.

    Features

    • Remote sensing and programming
    • Auto-series, auto-parallel, and auto-tracking
    • Front and rear output terminals
    • Floating output to serve as positive or negative source
    • Output ratings (0-55°C): 0-10 V, 0-10 A
    • Ripple and noise (20 Hz to 20 MHz): CV: 500 uV rms, 25 mV peak-to-peak; CC: 5 mA rms
    • Line regulation: 0.01% + 1 mV, 0.05% + 1 mA
    • Load regulation: 0.01% + 1 mV, 0.05% + 1 mA
    • Physical Specifications: Weight: 11.3 kg (25 lb); Dimensions: 210 mm W x 131 mm H x 435 mm D (8.25 in x 5.16 in x 17.13 in)

     
     
    Agilent / HP 6289A Agilent/HP 6289A 50 Volt 1.5 Amp Power Supply Contact Sales
    Agilent/HP 6289A 50 Volt 1.5 Amp Power Supply

     

    Agilent/HP 6289A 50 Volt 1.5 Amp Power Supply

    Rent me for $100 a month

       The Agilent/HP 6289A Power Supply is a constant voltage/constant current power supply featuring separate coarse and fine voltage and current controls which allow the voltage and current to be varied form 0 to 40 VDC and 0 to 1.5 A. It has a load effect of 0.01% +2 mV in voltage and 0.01% +250 ?A in current. This power supply has a four position meter function switch to select either of two output voltage or output current ranges for display on the panel meter. Other features include remote sensing and programming, auto series, auto-parallel and tracking operation, front and rear output terminals, and floating output. Input requirements are 115 VAC (?10%), 48 to 440 Hz. The 6289A is a reliable medium range power supply capable of many applications in the lab or production line.

     
     
    Agilent / HP 6552A Agilent/HP 6552A 20 Volt 25 Amp Power Supply Contact Sales
    Agilent/HP 6552A 20 Volt 25 Amp Power Supply

     

    Agilent/HP 6552A 20 Volt 25 Amp Power Supply

     

    Rent me for $300 a month

     

    The Agilent 6552A is one of the 655x series of 500 Watt, single output, series pass regulated power supplies. It is the manual front panel controlled version of the 6652A. All other specifications are identical. with front panel and analog programming of output voltage and current. Up to five front panel settings can be stored in nonvolatile storage registers for later recall. The unit is rated 0 to 20 Vdc @ 25 A.

     

    Features

    • Auto-parallel up to three units
    • Outputs can be connected in parallel or in series
    • Programmable over-voltage and over-current protection
    • Over-temperature protection
    • Discrete Fault Indicator/Remote Inhibit (DFI/RI)
    • User definable power-on state

     
     
    Agilent / HP 6554A Agilent/HP 6554A 60 Volt 9 Amp Power Supply Contact Sales
    Agilent/HP6554A Power Supply

     

    Agilent/HP 6554A 60 Volt 9 Amp Power Supply

    Rent me for $200 a month

     

    Front Panel Operation only, no GPIB Installed

    Flexible and reliable power with fast protection features

    The 6554A is reliable and versatile. Single-output solutions streamline common tasks and accelerate test throughput with fast up- and downprogramming.

    • Utilize front panel and analog control of output voltage and current
    • Reduce test time in system applications via fast up- and downprogramming
    • Perform extremely accurate measurements with very low ripple and noise
    • Achieve greater output flexibility with parallel or series connection of multiple units
    • Ensure DUT safety with overvoltage and overcurrent protection and remote sensing

    Supplemental Characteristics for 6654A

    Floating Voltage: Output terminals can be floated up to ±240 Vdc from chassis ground

    Remote Sensing: Up to half the rated output voltage can be dropped in each load lead. The drop in the load leads subtracts from the voltage available for the load.

    Output Programming Response Time: The rise and fall time (10/90% and 90/10%) of the output voltage is less than 15 ms. The output voltage change settles within 1 LSB (0.025% x rated voltage) of final value in less than 60 ms.

    Down Programming: An active down programmer sinks approximately 20% of the rated output current

    Modulation: (Analog programming of output voltage and current)

    Input signal: 0 to ¿5 V

    Input impedance: 10 k Ohm nominal ac Input: (ac input frequency 47 to 63 Hz)

    Voltage 100 Vac 120 Vac 220 Vac 240 Vac

    Current 12 A 10 A 5.7 A 5.3 A

    Input Power: 1,380 VA, 1,100 W at full load; 120 W at no load

    Regulatory Compliance: Listed to UL 1244; certified to CSA556B; conforms to IEC 61010-1.

    Size: 425.5 mm W x 132.6 mm H x 497.8 mm D (16.75 in x 5.22 in x 19.6 in)

    Weight: Net, 25 kg (54 lb); shipping, 28 kg (61 lb)
     
    Agilent / HP 66000A Agilent/HP 66000A Modular Power Supply Mainframe Contact Sales
    Agilent/HP 66000A Modular Power Supply Mainframe

     

    Agilent/HP 66000A Modular Power Supply Mainframe

    Rent me for $100 a month

       The Agilent/HP 66000A Modular Power System (MPS) is an integrated, fully programmable power system that saves rack space and GPIB addresses, and is easy to install and use. Each Agilent/HP 66000A MPS Mainframe can accommodate up to eight single-slot modules. With an auxiliary mainframe connected through a serial link cable, up to sixteen single-slot modules can be controlled from a single GPIB address. For applications requiring a broader range of power ratings, the Agilent/HP 66000 system can be serial-linked to the Agilent 667xA, 665xA, 664xA, and 603xA series power supplies.   

       Modules are removed and installed through the front of the mainframe. Each module has a connector that attaches to the back of the mainframe. With the module connector wired and attached to the mainframe, the module slides in and out of the mainframe without disturbing the application connections. The optional Agilent 66001A MPS Keyboard is available for controlling the Agilent 66000 Modular Power System without having to connect it to a computer.

       Agilent/HP high performance DC power supplies offer speed and accuracy for test optimization. The Agilent/HP 66000 modular power system simplifies test-system assembly, cabling, programming, debugging and operation. The 66000A is 4 U, 8 slot mainframe that accepts 1 to 8 modules below in any combination. Modules are ordered separately.

     
    Agilent / HP 66102A Agilent/HP 66102A 20 Volt 7.5 Amp Modular Power Supply Contact Sales
    Agilent/HP 66102A 60 Volt 2.5 Amp Modular Power Supply

     

    Agilent/HP 66102A 20 Volt 7.5 Amp Modular Power Supply

    Rent me for $100 a month

      Agilent/HP's high performance DC power supplies offer speed and accuracy for test optimization. The modular power system, 1200 W per mainframe GPIB 66100A series permits up to 8 outputs of 150 W per output in 4U of rack space; reconfigure fast with easily swappable modules; fast, low-noise outputs; and LIST mode and advance triggering system. The Agilent 150W GPIB module output 66102A is a flexible modular supply designed for automated testing that helps meet changing requirements in ATE and production test with a modular design that conserves rack space and simplifies system cabling and assembly. The 66102A Power Supply is controlled through the GPIB port of the host 66000A Mainframe or using the optional Agilent 66001A MPS Keyboard for controlling the Agilent 66000A Modular Power System without having to connect it to a computer.

    Output Ratings at 40°C

    • Output voltage: 0 to 60 V
    • Output current: 0 to 2.5 A
    • Maximum power: 150 W

    Programming Accuracy at 25°C ±5°C

    • Voltage 0.03% + 27 mV
    • Current 0.03% + 1.2 mA

    Ripple & Noise (20 Hz to 20 MHz)

    • Constant Voltage rms: 9 mV
    • Peak-to-Peak: 15 mV
    • Constant Current rms: 1 mA

    Readback Accuracy (via GPIB or keyboard display at 25°C ±5°C)

    • Voltage 0.02%+ 16 mV
    • Current 0.02%+ 1 mA

    Output Connections

       System assembly is simplified thanks to a quick-disconnect connector assembly on each module. Once your wires are connected to the load, the connector design permits the modules to be removed from the front of the mainframe without disconnecting cabling or removing the mainframe from the rack. One connector assembly is shipped with each module.
     
    Agilent / HP 66104A Agilent/HP 66104A 60 Volt 2.5 Amp Modular Power Supply Contact Sales
    Agilent/HP 66104A 60 Volt 2.5 Amp Modular Power Supply

     

    Agilent/HP 66104A 60 Volt 2.5 Amp Modular Power Supply

    Rent me for $100 a month

      Agilent/HP's high performance DC power supplies offer speed and accuracy for test optimization. The modular power system, 1200 W per mainframe GPIB 66100A series permits up to 8 outputs of 150 W per output in 4U of rack space; reconfigure fast with easily swappable modules; fast, low-noise outputs; and LIST mode and advance triggering system. The Agilent 150W GPIB module output 66104A is a flexible modular supply designed for automated testing that helps meet changing requirements in ATE and production test with a modular design that conserves rack space and simplifies system cabling and assembly. The 66104A Power Supply is controlled through the GPIB port of the host 66000A Mainframe or using the optional Agilent 66001A MPS Keyboard for controlling the Agilent 66000A Modular Power System without having to connect it to a computer.

    Output Ratings at 40°C

    • Output voltage: 0 to 60 V
    • Output current: 0 to 2.5 A
    • Maximum power: 150 W

    Programming Accuracy at 25°C ±5°C

    • Voltage 0.03% + 27 mV
    • Current 0.03% + 1.2 mA

    Ripple & Noise (20 Hz to 20 MHz)

    • Constant Voltage rms: 9 mV
    • Peak-to-Peak: 15 mV
    • Constant Current rms: 1 mA

    Readback Accuracy (via GPIB or keyboard display at 25°C ±5°C)

    • Voltage 0.02%+ 16 mV
    • Current 0.02%+ 1 mA

    Output Connections

       System assembly is simplified thanks to a quick-disconnect connector assembly on each module. Once your wires are connected to the load, the connector design permits the modules to be removed from the front of the mainframe without disconnecting cabling or removing the mainframe from the rack. One connector assembly is shipped with each module.
     
    Agilent / HP 6612C Agilent/HP 6612C 20 Volt 2 Amp Power Supply Contact Sales
    Agilent/HP 6612C 20 Volt 2 Amp Power Supply

     

    Agilent/HP 6612C 20 Volt 2 Amp Power Supply

    Rent me for $200 a month

       Agilent/HP 6612C  high performance DC power supplies offer speed and accuracy for test optimization. The single output 40 watt 6612C provide small, compact size for bench and system use; fast, low-noise outputs; and dual-range precision low current measurement. The Agilent 40W, single output 6612C is a versatile low-power solution designed for demanding applications, and is a one-box solution that includes extensive measurement capabilities and built-in GPIB and RS-232 interfaces. The Agilent/HP 6612C System DC Power Supply is an ideal power source for demanding production test applications. This dc power supply offers high performance and precision measurements in a one-box solution. To reduce test-system development time and provide precision testing, the 6612C provides current measurement down to the microamp level. The 6612C also provides high-speed programming with under 4 millisecond response time.
     

    Features

    Output Ratings
    • Voltage: 0 to 20 V
    • Current: 0 to 2 A
    Programming Accuracy at 25°C ±5°C
    • Voltage: 10 m V
    • +Current 0.05% + 1 m A
    Ripple & Noise from 20 Hz to 20 MHz
    • Voltage rms: 0.5 mV
    • Voltage Peak-to-Peak: 3 mV
    • Normal mode rms: 1 mA
    Load & Line Regulation
    • Load Voltage: 2 mV
    • Load Current: 0.5 mA
    • Line Voltage: 0.5 mV
    • Line Current: 0.5 mA
     
    Agilent / HP 6623A Agilent/HP 6623A Triple Output Power Supply $1,250.00
    Agilent/HP 6623A Quad Output Power Supply

     

    Agilent/HP 6623A Triple Output Power Supply

    Rent me for $300 a month

    Output Ratings
    • 2 Low-range volts, amps: 0 to 7 V, 0 to 5 A; 0 to 20 V, 0 to 2 A, 40 Watts
    • 1 High range volts, amps: 0 to 20 V, 0 to 2 A; 0 to 50 V, 0 to 0.8 A 40 Watts

        The Agilent/HP 6623A Multiple Output Linear Power Supply features a combination of programming capabilities and linear power supply performance that make systems applications. Each of the 3 individual power supplies in the 6623A offers a total of up to 40 watts of output power, with voltages up to 20 volts on channels 1 and 2 and up to 50 volts on channels 3. Output currents up to 2 amps. This flexibility allows you to use the same output to power loads with different voltage and current requirements. No separate command is required to program ranges; the power supply automatically selects one of the operating ranges based on the last parameter (voltage or current) that is set. Additionally, each 6623A output contains an active down programmer, which means that voltage down programming can be accomplished as quickly as up programming, even without a load. The Agilent/HP triple-output 6623A is a versatile solution help improve system accuracy and reduce test time in a 3U high package

    Features

    • Utilize up to three fully isolated power supplies in a 3U package
    • Choose standard or dual-range, high precision models
    • Perform rapid voltage changes via fast output programming with active down programming
    • Automate testing via GPIB interface (drivers available)
    • Enhance signal integrity in test systems via low-noise outputs
    • Simplify cabling with built-in measurements
    • Streamline tasks with front panel control and advanced programmable features
    • Ensure DUT safety with protection features
     
    Agilent / HP 6624A Agilent/HP 6624A Quad Output Power Supply $1,250.00
    Agilent/HP 6624A Quad Output Power Supply

     

    Agilent/HP 6624A Quad Output Power Supply

    Rent me for $300 a month

    Output Ratings
    • 2 Low-range volts, amps: 0 to 7 V, 0 to 5 A; 0 to 20 V, 0 to 2 A, 40 Watts
    • 2 High range volts, amps: 0 to 20 V, 0 to 2 A; 0 to 50 V, 0 to 0.8 A 40 Watts

        The Agilent/HP 6624A Multiple Output Linear Power Supply features a combination of programming capabilities and linear power supply performance that make systems applications. Each of the 4 individual power supplies in the 6624A offers a total of up to 40 watts of output power, with voltages up to 20 volts on channels 1 and 2 and up to 50 volts on channels 3 and 4. Output currents up to 2 amps. This flexibility allows you to use the same output to power loads with different voltage and current requirements. No separate command is required to program ranges; the power supply automatically selects one of the operating ranges based on the last parameter (voltage or current) that is set. Additionally, each 6624A output contains an active down programmer, which means that voltage down programming can be accomplished as quickly as up programming, even without a load.

    Features

    • Utilize up to four fully isolated power supplies in a 3U package
    • Choose standard or dual-range, high precision models
    • Perform rapid voltage changes via fast output programming with active down programming
    • Automate testing via GPIB interface (drivers available)
    • Enhance signal integrity in test systems via low-noise outputs
    • Simplify cabling with built-in measurements
    • Streamline tasks with front panel control and advanced programmable features
    • Ensure DUT safety with protection features
     
    Agilent / HP 66309D Agilent/HP 66309D Dual Mobile Communications Power Supply Contact Sales
    Agilent/HP 66309D Dual Mobile Communications Power Supply

     

    Agilent/HP 66309D Dual Mobile Communications Power Supply

    Rent me for $300 a month

       The Agilent/HP 66309D dual output mobile communications dc source provides two outputs for testing both the main battery power and the battery charger circuitry, allowing customers to test phones and chargers with the same equipment. This feature helps save on rack space (2 outputs in a half rack box) and eliminates the need for two separate power supplies. Excellent voltage transient response ensures maximum test-system throughput by minimizing device shutdowns due to significant voltage drops in the test wiring. The 66309D dc source provides all of the capabilities of the 66309B with the addition of a built in digital voltmeter. The 66309D offers an Agilent-developed feature that enables cellular-telephone manufacturers to detect permanently and intermittently open-sense wire connections automatically. Detection of open-sense wire connections allows users to prevent incorrect battery-charger calibration, incorrect test results and low-voltage phone shutdown due to a large transient voltage drop.  

       Dual output models are recommended when you need to provide power as a replacement to your device¿s main battery and when you need to simulate the battery charger power; Use one output to supply current to the battery charger input port and the second output to connect in place of the main battery (which sinks current to simulate the main battery being charged).

    Features

    • Two Outputs
    • Output Voltage Rating: 0 to 15 V
    • Output Current Reading: 0 to 3 A
    • Ideal for wireless/portable product test

    Overcome Battery Powered Device Testing Challenges

       Digital communications devices and digital battery powered devices present a unique testing challenge: they draw rapid pulses of current. By offering superior transient performance, unmatched in the marketplace, the Agilent Mobile Communications DC Sources dramatically reduce the transient voltage drop due to pulse loading characteristics of digital communications devices. The Agilent Mobile Communications DC Sources enable you to maximize test throughput by minimizing test interruption due to false trigger of device low voltage shutdown.

    Dynamic Measurement Capabilities

       The Agilent Mobile Communications DC Sources offer a built-in advanced measurement system to accurately measure battery current drains when the device operates in different modes (such as talk mode, active mode, standby mode, and off/sleep mode). Measurements made during these modes are critical for ensuring that your devices are operating properly and that you are getting the most out of the battery.

    Performs Like a Battery

       With their battery emulation features, the Agilent 66309D allows you to test your devices under the same power conditions that exist in actual use. Emulating the battery is key when characterizing battery operating life and detecting early product failures. These DC sources simulate the effects of internal resistance of the battery, enabling them to emulate the operation of various battery types or batteries in different charge states. Plus, these DC sources can simulate negative resistance so that you can compensate for voltage drop due to wiring in a fixture.

     

     
     
    Agilent / HP 6632A Agilent/HP 6632A 20 Volt 5 Amp Power Supply Contact Sales
    Agilent/HP 6632A 20 Volt 5 Amp Power Supply

     

    Agilent/HP 6632A 20 Volt 5 Amp Power Supply

    Rent me for $100 a month
     

      The Agilent/HP 6632A Power Supply is a 100 Watt, single output, series pass regulated supply is rated 20 V at 5 A. Both the voltage and current output can be programmed for either CV or CC operation. A built-in DC Voltage Meter and precision current shunt measure (readback) the actual power supply output. The internal HP-IB interface allows for complete programmability, including status reporting and interrupt generation with user designated fault conditions. It supports programming of voltage and current via HPIB, as well as measured voltage and current readback. It also has programmable overvoltage and overcurrent protection. It has selectable fast or normal mode operation via rear panel switch.

     Features

    • Output: 0-20V, 0-5A
    • Linear output regulation
    • Low ripple and noise
    • "One-Box" solution: includes V and I readback
    • Fast up and down programming

    What are the differences between the 6632A and 6632B?

    The "B" versions of the 6632 Power Supplies show the following enhancements over the "A" versions:

    1. Lower price
    2. Higher accuracy; especially in current measurement, accuracy is improved 1000 times.
    3. Programming response time is improved, requiring less than half the time of the "A" version.
    4. 80W model (6631B) added to the range.
    5. SCPI command set that the "A" version does not have. The instruments have command compatibility, meaning the programs developed for the 663xA will run on the 663xB.

    Precision low current measurement

    Current measurements can be performed to an accuracy of (0.1 % of reading + 2.5 µA) on the low current range. On the high current range, the accuracy is (0.2 % of reading + x). "x" varies from 0.25 mA to 1.6 mA, depending on the model and the output polarity. The B version enables you to perform characterization of "off "or "sleep-mode" battery current draw.
     

    High-speed output programming

    The B version provides high-speed programming with under 4 ms command processing time and under 2 ms output programming response time. The B version contributes to increased production throughput.

     
    Agilent / HP 66332A Agilent/HP 66332A 20 Volt 5 Amp Power Supply Contact Sales
    Agilent/HP 66332A 20 Volt 5 Amp Power Supply

     

    Agilent/HP 66332A 20 Volt 5 Amp Power Supply

    Rent me for $200 a month

      The Agilent/HP 66332A Dynamic Measurement dc Source provides dynamic measurement and analysis of voltage and current waveforms. It is ideal for testing digital wireless communications products/components because it not only provides the power for testing, but also performs the peak current measurements required to characterize the pulsed current demands of these products.

    Output Ratings

    • Voltage: 0 to 20 V
    • Current: 0 to 5 A
    • Peak Current for up to 7 ms: 5 A

    Programming accuracy at 25°C ±5°C (% of setting plus fixed)

    • Voltage: 10 mV
    • + Current: 2 mA

    Ripple & Noise (20 Hz to 20 MHz)

    • Voltage rms: 0.3 mV
    • Peak-to-Peak: 3 mV
    • Current rms: 2 mA

    Readback Accuracy

    • DC readback accuracy (at 25°C ±5°C): NA
    • AC + DC readback accuracy (at 25°C ±5°C) with DC plus a sinewave input > 25 mV rms: NA

    Overcome Battery Powered Device Testing Challenges

       Digital communications devices and digital battery powered devices present a unique testing challenge: they draw rapid pulses of current. By offering superior transient performance, unmatched in the marketplace, the Agilent Mobile Communications DC Sources dramatically reduce the transient voltage drop due to pulse loading characteristics of digital communications devices. The Agilent Mobile  Communications DC Sources enable you to maximize test throughput by minimizing test interruption due to false trigger of device low voltage shutdown.

    Dynamic Measurement Capabilities

      The Agilent Mobile Communications DC Sources offer a built-in advanced measurement system to accurately measure battery current drains when the device operates in different modes (such as talk mode, active mode, standby mode, and off/sleep mode). Measurements made during these modes are critical for ensuring that your devices are operating properly and that you are getting the most out of the battery.
     
    Agilent / HP 6651A Agilent/HP 6651A 8 Volt 50 Amp Power Supply Contact Sales
    Agilent/HP 6651A 8 Volt 50 Amp Power Supply

     

    Agilent/HP 6651A 8 Volt 50 Amp Power Supply

    Rent me for $200 a month

     

    This series of 500 W linear-regulated DC power supplies is designed to maximize the throughput of DUTs through the manufacturing test process with fast up and down programming time. Valuable assemblies can be destroyed by a minor component failure that causes a surge of current to flow into the DUT. Fast protection features, including fast crowbar, mode crossover protection, and the ability to connect the protection circuitry of multiple power supplies can increase production yield. Programming of the DC output and the protection features can be done either from the front panel or using industry standard SCPI commands, via the GPIB. Using the serial link, up to 16 power supplies can be connected through one GPIB address.

     Test system integration can be further simplified be using the VXIPlug&Play drivers. The output voltage and current can also be controlled with analog signals. This is helpful for certain types of noisy environments, and also immediate reactions to process changes. Lab bench use is enhanced by the fan speed control, which helps to minimize the acoustic noise.

    Operational features include:

    • Constant voltage (CV) or constant current (CC) output over the rated output range.

    • Built-in overvoltage (OV), overcurrent (OC), and overtemperature (OT) protection.

    • Automatic turn-on selftest.

    • Pushbutton nonvolatile storage and recall of up to 5 operating states (4 in Series 668xA/669xA supplies).

    • Local or remote sensing of output voltage.

    • Auto-parallel operation for increased total current.

    • Series operation for increased total voltage.

    • Analog input for remote programming of voltage and current.

    • Voltage output for external monitoring of output current.

    • User calibration from the front panel.

    Front Panel Programming

    The front panel has both rotary (RPG) and keypad controls for setting the output voltage and current. The panel display provides digital readouts of the output voltage and current. Other front panel controls permit:

    • Enabling or disabling the output.

    • Setting the overvoltage protection (OVP) trip voltage.

    • Enabling or disabling the overcurrent protection (OCP) feature.

    • Saving and recalling operating states.

    • Setting the GPIB address.

    • Reading GPIB error message codes.

    • Calibrating the power supply, including changing the calibration protection password.
     
    Agilent / HP E3610A Agilent/HP E3610A 15 Volt Power Supply $249.00

    Agilent E3610A 30 W Power Supply

     8V at 3A or 15V at  2A

    Affordable, full-featured benchtop power supplies provide excellent performance and flexibility

    All Agilent E3610A/11A/12A 30W single-output power supplies feature separate digital-panel meters for monitoring voltage and current simultaneously, giving you precise reading and control capability. All models also feature 10-turn potentiometers for accurate adjustment of voltage and current output settings.

    Features

    • 30W Single output, Dual range
    • Constant voltage (CV) and Constant Current (CC) modes
    • Digital voltage and current meters
    • Low noise and excellent regulation
    • 10 turn voltage and current adjust potentiometers

     
    Agilent / HP E3611A Agilent/HP E3611A 20V/35V DC Power Supply $249.00

    Agilent/HP E3611A 30-Watt Power Supply

    20V at 1.5A or 35V at 0.85A

    All Agilent E3610A/11A/12A 30W single-output power supplies feature separate digital-panel meters for monitoring voltage and current simultaneously, giving you precise reading and control capability. All models also feature 10-turn potentiometers for accurate adjustment of voltage and current output settings.

    Features

    • 30W Single output, Dual range
    • Constant voltage (CV) and Constant current (CC) modes
    • Digital voltage and current meters
    • Low noise and excellent regulation
    • 10 turn voltage and current adjust potentiometers

     
    Agilent / HP E3617A Agilent/HP E3617A 60 Volt 1 Amp Power Supply Contact Sales
    Agilent/HP 6632A 20 Volt 5 Amp Power Supply

     

    Agilent/HP E3617A 60 Volt 1 Amp Power Supply

    Rent me for $100 a month


    The Agilent/HP E3617A 60 watt power supply is used when you need a hefty power supply for your bench with clean, stable power. In addition to constant current and constant voltage modes, you get adjustable overvoltage protection, remote analog programming, front/rear output terminals and remote sensing that automatically compensates for voltage drops. These flexible 60-watt, single-range power supplies can be used as either voltage or current sources. When output terminal voltage increases to a preset shut-down level, an overvoltage protection circuit disables the output to protect the device under test (DUT) from damage. The overvoltage protection feature is easily monitored and adjusted from the front panel. Using remote sensing capability, these instruments automatically compensate for voltage drop in the load leads, so you get accurate voltage at the DUT.  You can combine multiple units in auto-parallel, auto-series and autotracking configurations for greater output voltage or current capacity. Front and rear output terminals allow flexible configuration. Output voltage and current can be controlled with external 0- to 10-volt analog voltage or variable resistance.

    Features 

    • 60W Single output
    • Constant voltage (CV) and constant current (CC) modes
    • Front and rear output terminals
    • Auto-parallel, Auto-series and Auto-tracking operation
    • 10 turn voltage and current adjust potentiometers
    • Overvoltage protection, remote analog programming, and remote sensing

    Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)

    • Range 1: 0 to 60 V, 0 to 1 A
    • Range 2: NA
    • Power (max): 60 W

    Ripple & Noise from 20 Hz to 20 MHz

    • Voltage rms: 200 µV
    • Peak-to-Peak: 1 mV

    Load & Line Regulation

    • 0.01% + 2 mV

    Meter Resolution

    • Voltage: 10 mV (0-20 V), 100 mV (>20 V)
    • Current: 1 mA
     
    Agilent / HP E3632A Agilent/HP E3632A 30 V 4 A Power Supply $995.00
    Agilent/HP E3632A Dual Range 120 W Power Supply

     

    Agilent/HP E3632A Dual Range 120 W Power Supply

    Rent me for $100 a month

    15 Volts at 7 Amps or 30 Volts at 4 Amps

       The Agilent/HP E3632A is a 120 W single output, dual range programmable dc power supply designed to meet the most exacting engineering requirements with traditional Agilent quality and reliability.

    Features
    • 105 W / 120 W single output dual range
    • Low noise and excellent regulation
    • Front and Rear output terminals
    • GPIB/RS-232 standard
    • Remote sense, OVP and OCP
    • SCPI compatible
       Excellent Performance you can trust the Agilent/HP E3632A to maintain 0.01% load and line regulation keep the output steady when power line and load change occur. The power supplies specify both normal mode voltage/current noise and common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications and the low common mode current provides isolation from power line current injection.

    Remote Interface
       If you have an IEEE-488 card or RS-232 in a PC, these power supplies will work for you. Every Agilent/HP E3632A comes equipped with both GPIB and RS-232 as standard. All programming is
    done in easy to use SCPI (Standard Commands for Programmable Instruments). The user¿s guide describes the process for first time programmers.

    Front Panel Operation
       A knob and self-guiding keypads allow you to set the output at the resolution you need for the most exacting adjustments quickly and easily. Up to three complete power supply setups can be stored and recalled from the internal non-volatile memory. The output on/off button sets the output to zero. Agilent/HP E3632A power supplies are designed for bench automation in R&D design and QA verification. Even at value prices, these power supplies deliver great features and power. Their low noise and excellent regulation are essential for R&D engineers who need to evaluate assemblies or applications, and for test engineers who need to develop repair strategies for production.

       Agilent basic DC power supplies offer essential features for a tight budget. The single output, 120-200 W, GPIB, E3632A provide dual range outputs; small, compact size for bench use; low output ripple and noise; as well as built-in measurements and basic programmable features with GPIB and RS232 interface. The Agilent 120W, GPIB, single output E3632A is a high performance supply optimized for manual and basic automated testing; and, with a combination of bench top capabilities and system features, it is designed to help improve measurement quality and reduce test time.
     
    Agilent / HP E3633A Agilent/HP E3633A 8/20 Volt 20/10 Amp Dual Range Power Supply Contact Sales
    Agilent/HP E3633A 8/20 Volt 20/10 Amp Dual Range Power Suppl

     

    Agilent/HP E3633A 8/20 Volt 20/10 Amp Dual Range Power Supply

     

    Rent me for $150 a month

     

    High performance supplies optimized for manual and basic automated testing

    With a combination of benchtop capabilities and system features, these versatile supplies can help you improve measurement quality and reduce test time.

    • Cover more voltage and current combinations with dual-range outputs
    • Perform remote programming using GPIB or RS-232 interface with SCPI command set (drivers available)
    • Enhance measurement results via low ripple and noise with excellent regulation
    • Simplify cabling with built-in measurements
    • Streamline tasks with front panel control and advanced programmable features
    • Ensure DUT safety with protection features

    E3633A single-output dual range power supplies

       These single output power supplies give you the flexibility to select from dual output ranges. Output load is protected against overvoltage and overcurrent, which are easily monitored and adjusted from the front panel and remote interface. Remote sense is available to eliminate the errors due to voltage drops on the load leads. The E3633A offers front and rear output terminals.

    Remote Interface

       If you have an IEEE-488 card or RS-232 in a PC, these power supplies will work for you. Every model comes equipped with both GPIB and RS-232 as standard. All programming is done in easy to use SCPI (Standard Commands for Programmable Instruments). The user¿s guide describes the process for first time programmers.

    Excellent Performance you can trust

       0.01% load and line regulation keep the output steady when power line and load change occur. The power supplies specify both normal mode voltage/current noise and common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications and the low common mode current provides isolation from power line current injection.
     
    Agilent / HP E3646A Agilent/HP E3646A 8/20 Volt 3/1.5 Amp Dual Range Power Supply Contact Sales
    Agilent/HP E3646A 8/20 Volt 3/1.5 Amp Dual Range Power Suppl

     

    Agilent/HP E3646A 8/20 Volt 3/1.5 Amp Dual Range Power Supply

        Rent me for $150 a month

     

    Great Performance, Outstanding Price

       With 30W of output power, the Agilent E3646A programmable dc power supplies provide great performance at a great price. The E3646A delivers clean power, dependable regulation, fast transient response and built-in GPIB and RS-232 interfaces. They¿re designed to meet the needs of R&D design verification, production testing, QA verifications and other demanding applications with Agilent Technologies¿ quality and reliability.

    Steady Output

       With 0.01 percent load and line regulation, Agilent E3646A power supplies keep output steady when power line and load changes occur. They also specify low normal mode voltage noise and low common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications, and the low common mode current provides isolation from power line current injection. Agilent E3646A power supplies specify less than 90 msec of voltage settling time at any output load condition.

    Remote Interface

       Agilent E3646A power supplies support any PC with a GPIB (IEEE-488) card or RS-232 interface. Every model ships standard with both GPIB and RS-232. Easy-to-use SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. The user manual provides information for beginning programmers, yet includes enough detail to help veteran programmers as well.

    Broad Support

       VXIplug&play software drivers are available for Agilent VEE and National Instruments LabView¿ and LabWindows¿, simplifying integration of the E3646A into your test system. The drivers are supported under Microsoft® Windows 98® and NT.®

    Front Panel Operation

       An easy-to-use rotary knob and self guiding keypads allow you to quickly and easily set output at the resolution you need. Voltage and current levels can be set to a maximum resolution of 10 mV/1 mA from the front panel. Up to five complete power supply setups can be stored and recalled from the internal non-volatile memory. The output on/off button sets the output to zero. Dual output models allow two voltages or currents to be displayed simultaneously.
     
    B&K Precision 1710 B&K Precision 1710 30 Volt 1 Amp Analog Power Supply $99.00
    B&K Precision 1710 30 Volt 1 Amp Analog Power Supply

     

    B&K Precision 1710 30 Volt 1 Amp Analog Power Supply

       The B&K Precision 1710 is a 30 volt at 1 amp single output power supply. It provides a low cost and high value. Put it on your bench and forget about it. It will run for years.

     
     
    Agilent / HP 6291A HP 6291A ,40V 5A DC Power Supply Contact Sales
    The meter is loose, (plastic frame tab broken) but operates correctly
     
    Keithley 2303 Keithley 2303 Power Supply 15 Volt 3 Amp Contact Sales
    Keithley 2303 Power Supply 15 Volt 3 Amp

     

    Keithley 2303 Power Supply 15 Volt 3 Amp

     Rent me for $100 a month

       The Model 2303 High Speed Power Supplies provide both voltage control and power consumption monitoring for automated testing of portable, battery-operated devices. These power supplies are optimized for testing battery-operated, wireless communication devices such as cellular phones that undergo substantial load changes for very short time intervals. These power supplies exhibit outstanding voltage stability during pulse load changes and can simultaneously measure load currents, even if they are short pulses. In addition, this family of power supplies can sink current and, thus, take on the characteristics of a discharged, rechargeable battery for testing chargers and charger-control circuitry.

    Applications

    • Development and testing of portable, battery-operated products, such as cellular and cordless telephones, mobile radios, and pagers.

    Features

    • Optimized for battery-powered device testing
    • Ultra-fast transient response to load changes
    • 5A continuous output
    • Pulse peak, average, and baseline current measurements
    • 100nA DC current sensitivity
    • 45W output (15V @ 3A, 9V @ 5A)
    • Sinks up to 2A

       The Keithley 2303 High Speed power supply  can output up to +15V at up to 3A or +9V at up to 5A. Voltage can be set in 1mV steps, and current limit can be set in 100μA steps. Maximum power output is 45W. The power supply can also be used to sink current (up to 2A). As a sink (current polarity is negative), the power supply is dissipating power rather than sourcing it. Note that it can read back the output voltage (V meter) and current (I meter). Display resolution for voltage readback is 1mV.

    Current Readback Ranges

    ¿ Models 2303 Two ranges for current readback: 5A and 5mA. On the 5A range, display resolution is 100μA, and on the 5mA range, resolution is 0.1 μA.

      The Keithley 2303 High Speed power supply also has a digital voltmeter (DVM) that is independent of the power supply circuit. The DVM can measure up to +20V (1mV resolution). When used with a pulsed load, the power supply can read back peak current, idle current, and average current. See Section 3 for details. A long integration (up to 60 seconds) function is provided to measure average current of a low frequency pulse (long period) or a series of pulses.
     
    Keithley 2306 Keithley 2306 Dual Channel Battery Charger and Simulator Contact Sales
    Keithley 2306 Dual Channel Battery Charger and Simulator

     

     Keithley 2306 Dual Channel Battery Charger and Simulator

    Rent me for $200 a month

       The dual-channel Model 2306 Battery/Charger Simulator were designed specifically for development and test applications of portable, battery-operated products, such as cellular and cordless telephones, mobile radios, and pagers. These precision power supplies have ultrafast transient response so they can have output characteristics identical to actual batteries. These supplies employ a unique variable output resistance so the voltage output can emulate a battery's response (U.S. Patent No. 6,204,647). They provide stable voltage outputs, even when a device-under-test (DUT) makes the rapid transition from the standby (low current) state to the RF transmission (high current) state. In addition, they can monitor DUT power consumption by measuring both DC currents and pulse load currents. The Model 2306's battery-simulator channel can be programmed to operate like a discharged rechargeable battery, sinking current from a separate charger or from the Model 2306's charger-simulator channel.

    Features

    • Ultrafast response to transient load currents
    • Choice of single- or dual-channel supplies
    • Optimized for development and testing of battery-powered devices
    • Variable output resistance for simulating battery response (U.S. Patent No. 6,204,647)
    • Pulse peak, average, and baseline current measurements
    • 100nA DC current sensitivity
    • Current step measure function
    • Sink up to 3A
    • Open sense lead detection
    • Built-in digital voltmeter

    Typical Applications

    • Development and testing of portable, battery-operated products such as:
    • Cellular and cordless telephones
    • Mobile radios
    • Pagers

       The Model 2306 battery-output channel is designed to simulate the output response of a battery. This capability, combined with its fast transient response, makes it possible to power the device during testing in exactly the same way as a battery powers the device during actual use. The output resistance of the battery channel can be programmed (with 10mΩ resolution) over the range from 0Ω to 1Ω so that the output resistance can be set to the same level as the output resistance of the battery that powers the device. Portable wireless devices make great demands on their battery power sources. The battery must source load currents that can jump virtually instantaneously from a standby current level (100¿300mA) to a full power RF transmission current level (1¿3A). In other words, the load current on the battery can increase rapidly by a factor of 700¿1000%. As a result, the battery voltage drops by an amount equal to the value of the current change multiplied by the battery¿s internal resistance. The Model 2306-VS enables test systems to duplicate this voltage drop by programming their output resistance to be equivalent to that of the battery that will power the device. This allows wireless device manufacturers to test their products under the same power conditions that they will encounter in actual use.

     

     
     
    Agilent / HP E3640A New Agilent E3640A 20V Power Supply $799.00
    Agilent/HP E3640A 30 W Power Supply
    Agilent/HP E3640A 30 W Power Supply

    Rent me for$125 a month

    8V at 3A or 20V at 1.5A

       The Agilent E3640A 30-watt single-output programmable power supply features built-in GPIB and RS-232 connectivity and SCPI language compatibility making it easy to create flexible power programs. For general-purpose use, this programmable power supply offers the performance of a system power supply at a surprisingly affordable price.

    Features

    • 30 W single output, dual range
    • Built-in GPIB and RS-232
    • SCPI compatible
    • Over-voltage protection and remote sensing
    • Low noise and excellent regulation
    • Front and rear output terminals
    Great Performance, Outstanding Price

    With 30 to 100W of output power, the Agilent E364xA-series of programmable dc power supplies provide great performance at a great price. All ten models deliver clean power, ependable regulation, fast transient response and built-in GPIB and RS-232 interfaces. They’re designed to meet the needs of R&D design verification, production testing, QA verifications and other demanding applications with Agilent Technologies’ quality and reliability.

    Steady Output

    With 0.01 percent load and line regulation, Agilent E364xA power supplies keep output steady when power line and load changes occur. They also specify low normal mode voltage noise and low common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications, and the low common mode current provides isolation from power line current injection. Agilent E364xA power supplies specify less than 90 msec of voltage settling time at any output load condition.

    Remote Interface

    Agilent E364xA power supplies support any PC with a GPIB (IEEE-488) card or RS-232 interface. Every model ships standard with both GPIB and RS-232. Easy-to-use SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. The user manual provides information for beginning programmers, yet includes enough detail to help veteran programmers as well.


    Front Panel Operation

    An easy-to-use rotary knob and selfguiding keypads allow you to quickly and easily set output at the resolution you need. Voltage and current levels can be set to a maximum resolution of
    10 mV/1 mA from the front panel. Up to five complete power supply setups can be stored and recalled from the internal non-volatile memory. The output on/off button sets the output to zero. Dual output models allow two voltages or currents to be displayed simultaneously.
     
    Array 3631A New Array 3631A USB Triple Output Power Supply $985.00
    New Array 3631A USB Triple Output Power Supply

     

    New Array 3631A USB Triple Output Power Supply

      Compare me to the Agilent E3631A. I include USB as a standard feature. Why pay more?

       This triple output dc power supply provides the stable and reliable dc power that the R&D engineer or production department can use. It has two tracking 25V outputs, which are together referenced to a floating common, and an isolated 6 volt output. It is easy to control from the front panel, or with industry standard SCPI commands via the RS232, USB or optional GPIB. The low noise, excellent regulation make this reliable power supply well suited for your design and test requirements. USB is not available on the Agilent E3631A and is the future of automated testing. GPIB is available as an option if desired. Compare the specifications very carefully to the Agilent E3631A and see the only difference is the standard USB and a much lower price. Volume discounts are available for large quantities.

    Features

    • Triple output
    • Tracking mode of ±25V outputs
    • Low ripple and noise
    • Excellent load and line regulation
    • Easy-to-use numerical keyboard and knob control
    • Highly visible vacuum-fluorescent display
    • USB, RS-232 and GPIB (Optional) interface
    • SCPI (Standard Commands for Programmable Instruments) compatibility
    • Maximum output limitation
    • Operating parameters storage
    • Portable, ruggedized case with non-skid feet
    Voltage Output0~+6V0~+25V0~-25V
    Current Output0~5A0~1A0~1A
    Load Regulation
    Voltage0.01%+2mV
    Current0.01%+250uA

     
     
    Array 3644A New Array 3644A 18 V 5A Power Supply $265.00
    New Array 3644A 18 V 5A Power Supply

     

    New Array 3644A 18 V 5A Power Supply

     

    The 3600 series Power Supply is a high performance single-output programmable DC power source. It is easy to control from the front panel, or via the serial port by the computer. Up to 10 settings can be stored for later recall. The low noise, excellent regulation, and built-in voltmeter/ammeter make this reliable power supply well suited for the exact needs of design, education, test and manufacture

    Features

    Number keypad and rotary knob
    Constant voltage & constant current mode
    Low output ripple & noise
    Output on/off
    Multifunction menu
    Maximum output voltage/power limitation
    High program resolution
    Over temperature/over current/over power protection
    10 parameters storage
    Can be controlled by PC
    Can be connected in series and parallel to expand output voltage and current
     
    Array 3645A New Array 3645A 36V 3A Power Supply $238.00
    New Array 3645A 36V 3A Power Supply

     

    New Array 3645A 36V 3A Power Supply

    The Array 3645A series Power Supply is a high performance single-output programmable DC power source. It is easy to control from the front panel, or via the serial port by the computer. Up to 10 settings can be stored for later recall. The low noise, excellent regulation, and built-in voltmeter/ammeter make this reliable power supply well suited for the exact needs of design, education, test and manufacture

    Features

    • Number keypad and rotary knob
    • Constant voltage & constant current mode
    • Low output ripple & noise
    • Output on/off Multifunction menu
    • Maximum output voltage/power limitation
    • High program resolution
    • Over temperature/over current/over power protection
    • 10 parameters storage
    • Can be controlled by PC
    • Can be connected in series and parallel to expand output voltage and current
     
    Array 3646A New Array 3646A 72V 1.5A Power Supply $265.00
    New Array 3646A 72V 1.5A Power Supply

     

    New Array 3646A 72V 1.5A Power Supply

       The Array 3646A series Power Supply is a high performance single-output programmable DC power source. It is easy to control from the front panel, or via the serial port by the computer. Up to 10 settings can be stored for later recall. The low noise, excellent regulation, and built-in voltmeter/ammeter make this reliable power supply well suited for the exact needs of design, education, test and manufacture

    Features

    • Numeric keypad and rotary knob
    • Constant voltage & constant current mode
    • Low output ripple & noise
    • Output on/off Multifunction menu
    • Maximum output voltage/power limitation
    • High program resolution
    • Over temperature/over current/over power protection
    • 10 parameters storage
    • Can be controlled by PC
    • Can be connected in series and parallel to expand output voltage and current
      Instek GPR-11H30D New Instek 110V 3A Power Supply $670.00
    New Instek GPR-11H30D 110 Volt 3 Amp Power Supply

    with two year warranty
    FEATURES

    ONS
    CONSTANT VOLTAGE  OPERATION
    Regulation Line regulation < 0.01% + 3mV Load regulation < 0.01% + 5mV ( < 10A)  < 0.02% + 5mV ( > 10A)
    Ripple & Noise < 1mVrms 5Hz ~ 1MHz
    Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
    Output Range 0 to rating voltage continuously adjustable    

      Instek GPS-1830D New Instek 18 Volt 3 Amp Power Supply $199.00 New Page 1

     

    New Instek 18V 3A Power Supply

    Light and Compact Design 

    • 0.01% High Regulation
    • Constant Voltage and Constant Current Operation
    • Series or Parallel Operation Function
    • Remote Control by External Voltage
    • Internal Select for Continuous or Dynamic Load
    • Low Ripple and Noise
    • Overload and Reverse Polarity Protection
    CONSTANT            VOLTAGE           OPERATION Regulation Line regulation < 0.01% + 3mV
    Load regulation < 0.01% + 3mV (rating current < 3A)
                            < 0.02% + 5mV (rating current > 3A)
    Ripple & Noise < 0.5mVrms 5Hz ~ 1MHz (rating current < 3A)
    < 1mVrms 5Hz ~ 1MHz (rating current > 3A)
    Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
    Temp. Coefficient < 300ppm/°C 
    Output Range 0 to rated voltage continuously adjustable

     

     

       Instek GPR-1810HD New Instek 18V 10A Power Supply $330.00
    New Instek GPR-1810HD 18 Volt 10 Amp Power Supply

    with two year warranty
    FEATURES

    ONS
    CONSTANT VOLTAGE  OPERATION
    Regulation Line regulation < 0.01% + 3mV Load regulation < 0.01% + 5mV ( < 10A)  < 0.02% + 5mV ( > 10A)
    Ripple & Noise < 1mVrms 5Hz ~ 1MHz
    Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
    Output Range 0 to rating voltage continuously adjustable    

      Instek GPR-1820HD New Instek 18V 20A Power Supply $750.00
    New Instek GPR-1820HD 18 Volt 20 Amp Power Supply

    with two year warranty
    FEATURES

    ONS
    CONSTANT VOLTAGE  OPERATION
    Regulation Line regulation < 0.01% + 3mV Load regulation < 0.01% + 5mV ( < 10A)  < 0.02% + 5mV ( > 10A)
    Ripple & Noise < 1mVrms 5Hz ~ 1MHz
    Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
    Output Range 0 to rating voltage continuously adjustable    

      Instek GPS-1850D New Instek 18V 5A Power Supply $180.00 New Page 1

     

    New Instek 18V 5A Power Supply

    Light and Compact Design 

    • 0.01% High Regulation
    • Constant Voltage and Constant Current Operation
    • Series or Parallel Operation Function
    • Remote Control by External Voltage
    • Internal Select for Continuous or Dynamic Load
    • Low Ripple and Noise
    • Overload and Reverse Polarity Protection
    CONSTANT            VOLTAGE           OPERATION Regulation Line regulation < 0.01% + 3mV
    Load regulation < 0.01% + 3mV (rating current < 3A)
                            < 0.02% + 5mV (rating current > 3A)
    Ripple & Noise < 0.5mVrms 5Hz ~ 1MHz (rating current < 3A)
    < 1mVrms 5Hz ~ 1MHz (rating current > 3A)
    Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
    Temp. Coefficient < 300ppm/°C 
    Output Range 0 to rated voltage continuously adjustable

     

     

       Instek GPR-30H10D New Instek 300V 1A Power Supply $670.00
    New Instek GPR-30H10D 300 Volt 1 Amp Power Supply

    with two year warranty
    FEATURES

    ONS
    CONSTANT VOLTAGE  OPERATION
    Regulation Line regulation < 0.01% + 3mV Load regulation < 0.01% + 5mV ( < 10A)  < 0.02% + 5mV ( > 10A)
    Ripple & Noise < 1mVrms 5Hz ~ 1MHz
    Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
    Output Range 0 to rating voltage continuously adjustable    

      Instek GPS-3030D New Instek 30V 3A Power Supply $180.00 New Page 1

     

    New Instek GPS-3030D 30V 3A Power Supply

    A great power supply at a great price

    • Light and Compact Design
    • 0.01% High Regulation
    • Constant Voltage and Constant Current Operation
    • Series or Parallel Operation Function
    • Remote Control by External Voltage
    • Internal Select for Continuous or Dynamic Load
    • Low Ripple and Noise
    • Overload and Reverse Polarity Protection

    SPECIFICATIONS

    CONSTANT VOLTAGE OPERATION

    • Regulation Line regulation < 0.01% + 3mV
    • Load regulation < 0.01% + 3mV (rating current < 3A) < 0.02% + 5mV (rating current > 3A)
    • Ripple & Noise < 0.5mVrms 5Hz ~ 1MHz (rating current < 3A) < 1mVrms 5Hz ~ 1MHz (rating current > 3A)
    • Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
    • Temp. Coefficient < 300ppm/°C
    • Output Range 0 to rating voltage continuously adjustable

    CONSTANT CURRENT OPERATION

    • Regulation Line regulation < 0.2% + 3mA
    • Load regulation < 0.2% + 3mA
    • Ripple Current < 3mArms
    • Output Range 0 to rating amperes continuously adjustable (Hi / Lo range switchable)

    METER

    • Digital 3 1/2 digits 0.5" LED display
    • 3 1/2 digits 0.39" LED display (for GPS-3030DD)
    • Accuracy + (0.5% of rdg + 2 digits)

    POWER SOURCE AC 100V/120V/220V/240V+10%, 50/60Hz

    DIMENSIONS 128(W) x 145(H) x 285(D) mm

     

     

     

       Instek GPR-3060D New Instek 30V 6A Power Supply $330.00
    New Instek GPR-3060D 30 Volt 6 Amp Power Supply

    with two year warranty
    FEATURES

    ONS
    CONSTANT VOLTAGE  OPERATION
    Regulation Line regulation < 0.01% + 3mV Load regulation < 0.01% + 5mV ( < 10A)  < 0.02% + 5mV ( > 10A)
    Ripple & Noise < 1mVrms 5Hz ~ 1MHz
    Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
    Output Range 0 to rating voltage continuously adjustable    

      Instek GPR-3510HD New Instek 35V 10A Power Supply $640.00
    New Instek GPR-3510HD 35 Volt 10 Amp Power Supply

    with two year warranty
    FEATURES

    ONS
    CONSTANT VOLTAGE  OPERATION
    Regulation Line regulation < 0.01% + 3mV Load regulation < 0.01% + 5mV ( < 10A)  < 0.02% + 5mV ( > 10A)
    Ripple & Noise < 1mVrms 5Hz ~ 1MHz
    Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
    Output Range 0 to rating voltage continuously adjustable    

      Instek GPR-6030D New Instek 60V 3A Power Supply $330.00
    New Instek GPR-6030D 60 Volt 3 Amp Power Supply

    with two year warranty
    FEATURES

    ONS
    CONSTANT VOLTAGE  OPERATION
    Regulation Line regulation < 0.01% + 3mV Load regulation < 0.01% + 5mV ( < 10A)  < 0.02% + 5mV ( > 10A)
    Ripple & Noise < 1mVrms 5Hz ~ 1MHz
    Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
    Output Range 0 to rating voltage continuously adjustable    

      Instek GPR-6060HD New Instek 60V 6A Power Supply $640.00
    New Instek GPR-6060HD 60 Volt 6 Amp Power Supply

    with two year warranty
    FEATURES

    ONS
    CONSTANT VOLTAGE  OPERATION
    Regulation Line regulation < 0.01% + 3mV Load regulation < 0.01% + 5mV ( < 10A)  < 0.02% + 5mV ( > 10A)
    Ripple & Noise < 1mVrms 5Hz ~ 1MHz
    Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
    Output Range 0 to rating voltage continuously adjustable    

      Instek GPR-7550D New Instek 75V 5A Power Supply $700.00
    New Instek GPR-7550D 70 Volt 5 Amp Power Supply

    with two year warranty
    FEATURES

    ONS
    CONSTANT VOLTAGE  OPERATION
    Regulation Line regulation < 0.01% + 3mV Load regulation < 0.01% + 5mV ( < 10A)  < 0.02% + 5mV ( > 10A)
    Ripple & Noise < 1mVrms 5Hz ~ 1MHz
    Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
    Output Range 0 to rating voltage continuously adjustable    

      Instek GPR-0830HD New Instek 8V 30A Power Supply $750.00
    New Instek GPR-0830HD 8 Volt 30 Amp Power Supply

    with two year warranty
    FEATURES

    ONS
    CONSTANT VOLTAGE  OPERATION
    Regulation Line regulation < 0.01% + 3mV Load regulation < 0.01% + 5mV ( < 10A)  < 0.02% + 5mV ( > 10A)
    Ripple & Noise < 1mVrms 5Hz ~ 1MHz
    Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
    Output Range 0 to rating voltage continuously adjustable    

      Instek GPC-1850D New Instek GPC-1850D Triple Output Power Supply $460.00 New Instek GPC-1850D Triple Output Power Supply

     

    New Instek GPC-1850D Triple Output Power Supply

    with a two year warranty

        Output Range

    • Variable Dual 18 Volt Supplies at 3 Amps
    • Fixed 5 Volts at 3 amps

     A great power supply at a low cost. Instek means value.

    Features

    • Four Digital Panel Meters (GPC-3030DQ)

    • Auto Tracking

    • Auto Series and Parallel Operation

    • Constant Voltage and Constant Current Operation

    • Low Ripple and Noise

    • 3 1/2 Digits 0.39" LED Display(GPC-3030DQ)

    • 3 1/2 Digits 0.5" LED Display(GPC-1850D/3020D/3030D)

    • 5V, 3A Fixed Output

    • Overload and Reverse Polarity Protection

    • Rotation Speed of the Fan is Controlled by Heatsink Temperature

    • (Only European Specification)(GPC-3030DQ)

    • Internal Select for Continuous or Dynamic Load
       Instek GPC-3020D New Instek GPC-3020D Triple Output Power Supply $460.00 New Instek GPC-3020D Triple Output Power Supply

     

    New Instek GPC-3020D Triple Output Power Supply

    with a two year warranty

        Output Range

    • Variable Dual 30 Volt Supplies at 2 Amps
    • Fixed 5 Volts at 3 amps

     A great power supply at a low cost. Instek means value.

    Features

    • Four Digital Panel Meters (GPC-3030DQ)

    • Auto Tracking

    • Auto Series and Parallel Operation

    • Constant Voltage and Constant Current Operation

    • Low Ripple and Noise

    • 3 1/2 Digits 0.39" LED Display(GPC-3030DQ)

    • 3 1/2 Digits 0.5" LED Display(GPC-1850D/3020D/3030D)

    • 5V, 3A Fixed Output

    • Overload and Reverse Polarity Protection

    • Rotation Speed of the Fan is Controlled by Heatsink Temperature

    • (Only European Specification)(GPC-3030DQ)

    • Internal Select for Continuous or Dynamic Load
       Instek GPC-3030D New Instek GPC-3030D Triple Output Power Supply $460.00 New Instek GPC-3030D Triple Output Power Supply

     

    New Instek GPC-3030D Triple Output Power Supply

    with a two year warranty

        Output Range

    • Variable Dual 30 Volt Supplies at 3 Amps
    • Fixed 5 Volts at 3 amps

     A great power supply at a low cost. Instek means value.

    Features

    • Four Digital Panel Meters (GPC-3030DQ)

    • Auto Tracking

    • Auto Series and Parallel Operation

    • Constant Voltage and Constant Current Operation

    • Low Ripple and Noise

    • 3 1/2 Digits 0.39" LED Display(GPC-3030DQ)

    • 3 1/2 Digits 0.5" LED Display(GPC-1850D/3020D/3030D)

    • 5V, 3A Fixed Output

    • Overload and Reverse Polarity Protection

    • Rotation Speed of the Fan is Controlled by Heatsink Temperature

    • (Only European Specification)(GPC-3030DQ)

    • Internal Select for Continuous or Dynamic Load
       Instek GPC-3060D New Instek GPC-3060D Triple Output Power Supply $825.00 New Instek GPC-3060D Triple Output Power Supply

     

    New Instek GPC-3060D Triple Output Power Supply

    with a two year warranty

        Output Range

    • Variable Dual 30 Volt Supplies at 6 Amps
    • Fixed 5 Volts at 3 amps

     A great power supply at a low cost. Instek means value.

    Features

    • Four Digital Panel Meters (GPC-3030DQ)

    • Auto Tracking

    • Auto Series and Parallel Operation

    • Constant Voltage and Constant Current Operation

    • Low Ripple and Noise

    • 3 1/2 Digits 0.39" LED Display(GPC-3030DQ)

    • 3 1/2 Digits 0.5" LED Display(GPC-1850D/3020D/3030D)

    • 5V, 3A Fixed Output

    • Overload and Reverse Polarity Protection

    • Rotation Speed of the Fan is Controlled by Heatsink Temperature

    • (Only European Specification)(GPC-3030DQ)

    • Internal Select for Continuous or Dynamic Load
       Instek GPC-6030D New Instek GPC-6030D Triple Output Power Supply $825.00 New Instek GPC-6030D Triple Output Power Supply

     

    New Instek GPC-6030D Triple Output Power Supply

    with a two year warranty

        Output Range

    • Variable Dual 60 Volt Supplies at 3 Amps
    • Fixed 5 Volts at 3 amps

     A great power supply at a low cost. Instek means value.

    Features

    • Four Digital Panel Meters (GPC-3030DQ)

    • Auto Tracking

    • Auto Series and Parallel Operation

    • Constant Voltage and Constant Current Operation

    • Low Ripple and Noise

    • 3 1/2 Digits 0.39" LED Display(GPC-3030DQ)

    • 3 1/2 Digits 0.5" LED Display(GPC-1850D/3020D/3030D)

    • 5V, 3A Fixed Output

    • Overload and Reverse Polarity Protection

    • Rotation Speed of the Fan is Controlled by Heatsink Temperature

    • (Only European Specification)(GPC-3030DQ)

    • Internal Select for Continuous or Dynamic Load
       Instek GPD-3303S New Instek GPD-3303S Triple Output Power Supply with USB $595.00 New Instek GPD-3303S Triple Output Power Supply

     

    New Instek GPD-3303S Triple Output Power Supply

        As always the leading power supply producer in its kind, GW Instek has insisted upon the tough quality assurance policy in order to maintain its quality differential advantage. The digitally controlled GPD-3303S DC power supply are one of the latest offerings from GW Instek. It offers digital panel control, large display, bright LED indicators, high output resolution, 4 sets of setup memory, USB remote control and smart cooling fan control. Additionally, the GPD-3303S provide easy operation, a quick selection of panel settings and most importantly, a reasonable price. All these features make the GPD-3303S the most promising new comer in the power supply market. With 1mV/1mA high resolution, the GPD-3303S, guarantees clean and stable output. You can easily simulate the device under test's accurate behavior against small changes in voltage or current, which is impossible when using a low-resolution power supply. Overall, the resolution offered by the GPD-3303S is 10 to 100 times higher than that of traditional power supply. The GPD-3303S can save and recall panel settings, a feature which is usually not offered by general power supplies. You can quickly select a panel setting from 4 memory sets without manual configuration. Besides, the USB device port in the GPD-3303S allows you to remotely control the power supply according to your application needs.

    Features
  • Three Independent Output: 30V/3A x 2, 2.5V/3.3V/5V x 1
  • 4 LED Displays: 3 Digits after Decimal Point
  • Minimum Resolution: 1mV/1mA
  • Digital Panel Control (Rotary Encoder Switch, Rubber Key with Indicator)
  • User-Friendly Operation, Coarse/Fine Volume Control
  • 4 Panel Settings Save/Recall (Plus Factory Settings Recall)
  • Key-Lock
  • Warning Buzzer
  • Output ON/OFF
  • Tracking Series and Parallel Mode
  • Smart Cooling Fan Achieving Low Noise
  • Light-Weight and Compact Design

    •  

       Instek GPS-2303 New Instek GPS-2303 Dual 30 Volt 3 Amp Power Supply $349.00 New Page 1

     

    New Instek GPS-2303 Dual 30 Volt 3 Amp Power Supply

     

    with two year warranty

     

    Features 
 
 Auto Series, Parallel and Tracking Operation 
 Constant Voltage and Constant Current Operation 
 Low Ripple and Noise 
 Overload and Reverse Polarity Protection 
 Selectable for Continuous/Dynamic Load 
 Output Enable/Disable Control 
 Rotation speed of the fan is controlled by heatsink  temperature 
     
          CONSTANT VOLTAGE
          OPERATION (CH1, CH2)    		 Line Regulation < 0.01% + 3mV
    Load Regulation < 0.01% + 3mV (rating current < 3A)
    < 0.02% + 5mV (rating current > 3A)
    Ripple & Noise < 1mVrms 5Hz ~ 1MHz
    Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
     
    Instek GDP-3030DD New Instek GPS-3030DD 30 Volt 3 Amp Single Power Supply $235.00
    New Page 1

     

    New Instek GPS-3030DD 30 Volt 3 Amp Single Power Supply

       The Instek GPS-3030D Series are single output 90W, linear DC power supply. Overload and reverse polarity protection keep the GPS-3030DD Series and its loads safe from unexpected conditions. High regulation and low ripple/noise are maintained at 0.01% and < 1mVrms, respectively. Internal load selection, continuous or dynamic, accommodates applications such as pulsed current. Remote control terminals offer programming and operation from an external device.

    Features

    • Light and Compact Design
    • 0.01% High Regulation
    • Constant Voltage and Constant Current Operation
    • Series or Parallel Operation
    • Remote Control for External Programmable
    • Internal Select for Continuous or Dynamic Load
    • Overload and Reverse Polarity protection
    • Series or Parallel Operation

    DC Output

    • Voltage 0-30 Volts DC
    • Current 0-3 Amps DC

    Constant Voltage Operation

    Regulation

    • Line regulation≦0.01% + 3mV
    • Load regulation≦0.01% + 3mV (rating current≦3A)
    • Load regulation≦0.01% + 5mV (rating current > 3A)

    Ripple & Noise

    • ≦0.5mVrms 5Hz ~ 1MHz (rating current≦3A)
    • ≦1mVrms 5Hz ~ 1MHz (rating current > 3A)

    Recovery Time

    • ≦0.5mVrms 5Hz ~ 1MHz (rating current≦3A)
    • ≦1mVrms 5Hz ~ 1MHz (rating current > 3A)

    Temp. Coefficient

    • ≦300ppm/°C

    Output range

    • 0 to rating voltage continuously adjustable

    Constant Current Operation

    Regulation

    • Line regulation≦0.2% + 3mA
    • Load regulation≦0.2% + 3mA

    Ripple Current

    • ≦3mArms

    Output Range

    • 0 to rating current continuously adjustable (Hi/Lo range switchable)

    Meter

    Digital

    • 31∕2 digital 0.39" LED display (3030DD)
    • Accuracy ±(0.5﹪of rdg + 2 digits)
     
    Instek PSH-3610 New Instek PSH-3610 36 Volt 10 Amp Power Supply $740.00
    New Instek PSH-3610 36 Volt 10 Amp Power Supply

     

    New Instek PSH-3610 36 Volt 10 Amp Power Supply

    with a two year warranty

     The Instek PSH-series Programmable Power Supply are controlled by a Micro Processor Unit (MPU) that can easily connect the communication interface RS-232 or optional GPIB to computer in order to satisfy user¿s demands for auto-testing and auto-control. This PSH-series series of products have greatly reduced  the traditional big size and heavy weight of comparable products. The voltage and current are completely controlled by 12 bits D/A Converter with higher resolution and accuracy. Also, the digitalization of system makes a speedy, precise and convenient input of information controlled by the keyboard and rotation knobs. The adjustment of voltage/current is made by software calibration without manual error that will increase the preciseness of the instrument. The function of Over Voltage Protection (OVP) and Over Current Protection (OCP) is set with software and detected with hardware to achieve protected function precisely and speedily in order to prevent users from danger by using the instrument.

    Features

    • Wide Input Range and High Power Factor (P.F)
    • High Efficiency and High Power Density
    • Constant Voltage and Constant Current Operation
    • Over-Voltage, Over-Current and Over-Heat Protection
    • Low Ripple and Noise
    • Option : GPIB (IEEE-488.2) & RS-232 (Note: GPIB and RS-232C cannot be installed simultaneously)
    • Output ON / OFF Control
    • Self-Test and Software Calibration
    • LCD Display
    • Built-in Buzzer alarm
     
    Instek PSH-3620 New Instek PSH-3620 36 Volt 20 Amp Power Supply $1,260.00
    New Instek PSH-3620 36 Volt 20 Amp Power Supply

     

    New Instek PSH-3620 36 Volt 20 Amp Power Supply

    with a two year warranty

     The Instek PSH-series Programmable Power Supply are controlled by a Micro Processor Unit (MPU) that can easily connect the communication interface RS-232 or optional GPIB to computer in order to satisfy user¿s demands for auto-testing and auto-control. This PSH-series series of products have greatly reduced  the traditional big size and heavy weight of comparable products. The voltage and current are completely controlled by 12 bits D/A Converter with higher resolution and accuracy. Also, the digitalization of system makes a speedy, precise and convenient input of information controlled by the keyboard and rotation knobs. The adjustment of voltage/current is made by software calibration without manual error that will increase the preciseness of the instrument. The function of Over Voltage Protection (OVP) and Over Current Protection (OCP) is set with software and detected with hardware to achieve protected function precisely and speedily in order to prevent users from danger by using the instrument.

    Features

    • Wide Input Range and High Power Factor (P.F)
    • High Efficiency and High Power Density
    • Constant Voltage and Constant Current Operation
    • Over-Voltage, Over-Current and Over-Heat Protection
    • Low Ripple and Noise
    • Option : GPIB (IEEE-488.2) & RS-232 (Note: GPIB and RS-232C cannot be installed simultaneously)
    • Output ON / OFF Control
    • Self-Test and Software Calibration
    • LCD Display
    • Built-in Buzzer alarm
     
    Instek PSH-3630 New Instek PSH-3630 36 Volt 30 Amp Power Supply $1,740.00
    New Instek PSH-3630 36 Volt 30 Amp Power Supply

     

    New Instek PSH-3630 36 Volt 30 Amp Power Supply

    with a two year warranty

     The Instek PSH-series Programmable Power Supply are controlled by a Micro Processor Unit (MPU) that can easily connect the communication interface RS-232 or optional GPIB to computer in order to satisfy user¿s demands for auto-testing and auto-control. This PSH-series series of products have greatly reduced  the traditional big size and heavy weight of comparable products. The voltage and current are completely controlled by 12 bits D/A Converter with higher resolution and accuracy. Also, the digitalization of system makes a speedy, precise and convenient input of information controlled by the keyboard and rotation knobs. The adjustment of voltage/current is made by software calibration without manual error that will increase the preciseness of the instrument. The function of Over Voltage Protection (OVP) and Over Current Protection (OCP) is set with software and detected with hardware to achieve protected function precisely and speedily in order to prevent users from danger by using the instrument.

    Features

    • Wide Input Range and High Power Factor (P.F)
    • High Efficiency and High Power Density
    • Constant Voltage and Constant Current Operation
    • Over-Voltage, Over-Current and Over-Heat Protection
    • Low Ripple and Noise
    • Option : GPIB (IEEE-488.2) & RS-232 (Note: GPIB and RS-232C cannot be installed simultaneously)
    • Output ON / OFF Control
    • Self-Test and Software Calibration
    • LCD Display
    • Built-in Buzzer alarm
     
    Instek PSM-2010 New Instek PSM-2010 Programmable Dual-Range D.C. Power Supply $899.00
    New Instek PSM-2010 Programmable Dual-Range D.C. Power Suppl
    New Instek PSM-2010 Programmable Dual-Range D.C. Power Supply

    Compare to the Agilent E3633A

    with two year warranty

    GPIB Code compatable with the E3633A

    Range 1 8 Volts at 20 Amps
    Range 2 20 Volts at 10 Amps

    FEATURES 
    • Single Output Dual Range Max. 200W
    •  High Resolution: 1mV/1mA
    •  Stable & Clear Power: 0.01% Load/Line Regulation, 350uVrms Ripple
    •  Auto Step running with timer setting and 100 sets Memory
    •  Safety Design: OVP, OCP & OTP ; Output ON/OFF Control
    •  Self-Test and Software Calibration
    •  High Visible Vacuum-Fluorescent Display
    •  Front and Rear Output Terminal
    •  LabView Driver 
    •  RS-232C, GPIB Interface Standard

     
    Instek PSM-3004 New Instek PSM-3004 Dual Range Power Supply $799.00

    New Instek PSM-3004 Programmable Dual-Range D.C. Power Supply

    Compare to the Agilent E3632A

    with two year warranty

    Directly GPIB code compatable with E3632A

    Range 1 15 Volts at 7 Amps
    Range 2 30 Volts at 4 Amps

    FEATURES 
    • Single Output Dual Range Max. 200W
    •  High Resolution: 1mV/1mA
    •  Stable & Clear Power: 0.01% Load/Line Regulation, 350uVrms Ripple
    •  Auto Step running with timer setting and 100 sets Memory
    •  Safety Design: OVP, OCP & OTP ; Output ON/OFF Control
    •  Self-Test and Software Calibration
    •  High Visible Vacuum-Fluorescent Display
    •  Front and Rear Output Terminal
    •  LabView Driver 
    •  RS-232C, GPIB Interface (Option)
    •  Interface RS-232 and GPIB

     
    Instek PSM-6003 New Instek PSM-6003 Dual Range Power Supply $910.00

    New Instek PSM-6003 Programmable Dual-Range D.C. Power Supply

    Compare to the Agilent E3634A

    with two year warranty

    Code compatable with the E3634A

    Range 1 30 Volts at 6 Amps
    Range 2 60 Volts at 3.3 Amps

    FEATURES 
    • Single Output Dual Range Max. 200W
    •  High Resolution: 1mV/1mA
    •  Stable & Clear Power: 0.01% Load/Line Regulation, 350uVrms Ripple
    •  Auto Step running with timer setting and 100 sets Memory
    •  Safety Design: OVP, OCP & OTP ; Output ON/OFF Control
    •  Self-Test and Software Calibration
    •  High Visible Vacuum-Fluorescent Display
    •  Front and Rear Output Terminal
    •  LabView Driver 
    •  RS-232C, GPIB Interface (Option)
    •  Interface RS-232  and GPIB 
     
    Instek PSP-2010 New Instek PSP-2010 20V 10A Power Supply $275.00

    New Instek PSP-2010 20V 10A Power Supply

    with two year warranty

    20 Volts at 10 Amps
    FEATURES
    •  LCD Display
    •  Output ON/OFF Control
    •  3 Step Fan Speed Control
    •  Setting of Voltage/ Current/ Power
    •  Key Lock to Avoid Error Operation
    •  Normal, +% & -% Output Operation Key 
    •  High Efficinecy and High Power Density
    •  Standard Interface: RS-232C
    •  Option: Jack Type Terminals for Europe 


     
    Instek PSP-405 New Instek PSP-405 40V 5A Power Supply $275.00

    New Instek PSP-405 40V 5A Power Supply

    with two year warranty

    40 Volts at 5 Amps
    FEATURES
    •  LCD Display
    •  Output ON/OFF Control
    •  3 Step Fan Speed Control
    •  Setting of Voltage/ Current/ Power
    •  Key Lock to Avoid Error Operation
    •  Normal, +% & -% Output Operation Key 
    •  High Efficinecy and High Power Density
    •  Standard Interface: RS-232C
    •  Option: Jack Type Terminals for Europe 


     
    Instek PSP-603 New Instek PSP-603 60V 3.5A Power Supply $275.00

    New Instek PSP-603 60V 3.5A Power Supply

    with two year warranty

    60 Volts at 3.5 Amps
    FEATURES
    •  LCD Display
    •  Output ON/OFF Control
    •  3 Step Fan Speed Control
    •  Setting of Voltage/ Current/ Power
    •  Key Lock to Avoid Error Operation
    •  Normal, +% & -% Output Operation Key 
    •  High Efficinecy and High Power Density
    •  Standard Interface: RS-232C
    •  Option: Jack Type Terminals for Europe 


     
    Instek PSS-2005GP New Instek PSS-2005GP 20V 5A GPIB Power Supply $549.00

    New Instek PSS-2005GP 20V 5A GPIB Power Supply

    with two year warranty

    20 Volts at 5 Amps with GPIB option
    FEATURES
    •  Digitized Programmable Interface, High Resolution 10mV?A 1mA
    •  High Stability, Low Drift
    •  Over-Voltage, Over-Current, Over-Temperature Protection
    •  Intelligent Fan Control (Change by Output Power)
    •  Built-in Buzzer Alarm
    •  Interface (Standard) RS-232
    •  Interface (Option) GPIB (IEEE 488.2)

     
    Instek PSS-3203GP New Instek PSS-3203GP 32V 3A GPIB Power Supply $549.00

    New Instek PSS-3203GP 32V 3A GPIB Power Supply

    with two year warranty

    32 Volts at 3 Amps with GPIB option
    FEATURES
    •  Digitized Programmable Interface, High Resolution 10mV?A 1mA
    •  High Stability, Low Drift
    •  Over-Voltage, Over-Current, Over-Temperature Protection
    •  Intelligent Fan Control (Change by Output Power)
    •  Built-in Buzzer Alarm
    •  Interface (Standard) RS-232
    •  Interface (Option) GPIB (IEEE 488.2)

     
    Instek PS-3201 New Instek PST-3201 Triple Output GPIB Power Supply $999.00

    New Instek PST-3201 Triple Output GPIB Power Supply

    with two year warranty

    Triple 32 Volt supplies at 1 Amps with GPIB option

    FEATURES
    •  Digitized Programmable Interface, High Resolution 10mV 1mA
    •  192 * 128 LCD Display, Display Several Setting and Measuring Result Simultaneously (Variable Display Mode) 
    •  Intelligent Windows Operating Interface 
    •  Support Several Directly Buttons
    •  Provided Auto Series and Parallel Function 
    •  High Stability, Low Drift
    •  Over-Voltage, Over-Current, Over-Temperature Protection
    •  Intelligent Fan Control (Change by Output Power)
    •  Built-in Buzzer Alarm
    •  100 Sets Memory for Setting Save, Auto Running
    •  Interface (Standard)RS-232 and GPIB (IEEE 488.2)


     
    Instek PS-3202 New Instek PST-3202 Triple Output GPIB Power Supply $999.00

    New Instek PST-3202 Triple Output GPIB Power Supply

    with two year warranty

    Dual 32 Volt supplies at 2 Amps

    Single 6 Volt Supply at 5 Amps

    Compare to the Agilent E3631A

    FEATURES
    •  Digitized Programmable Interface, High Resolution 10mV 1mA
    •  192 * 128 LCD Display, Display Several Setting and Measuring Result Simultaneously (Variable Display Mode) 
    •  Intelligent Windows Operating Interface 
    •  Support Several Directly Buttons
    •  Provided Auto Series and Parallel Function 
    •  High Stability, Low Drift
    •  Over-Voltage, Over-Current, Over-Temperature Protection
    •  Intelligent Fan Control (Change by Output Power)
    •  Built-in Buzzer Alarm
    •  100 Sets Memory for Setting Save, Auto Running
    •  Interface (Standard)RS-232 and GPIB (IEEE 488.2)
     SPECIFICATIONS   MODEL  PST-3202
     
    • Output Voltage 0~32V x 2, 0~6V x 1 0~32V x 3
    • Current 0~2A x 2, 0~5A x 1 0~1A x 3
    • OVP 0~33V x 2, 0~7V x 1 0~ 33V x 3
    • Load Effect Voltage < 3mV Current < 3mA
    • Source Effect Voltage < 3mV Current < 3mA
    • Resolution Voltage 10mV ( 20mV rating voltage > 36V )
    • Current 1mA ( 2mA rating current > 3.5A )
    • OVP 10mV ( 20mV rating voltage > 36V )
    • Program Accuracy ( 25 + 5°C ) Voltage < 0.05% + 10mV ( +20mV rating voltage > 36V ) Current < 0.1% + 5mA OVP < 0.05% + 10mV
    • Ripple & Noise ( 20Hz ~ 20MHz ) Voltage Ripple< 1mVrms / 3mVp-p
    • Noise< 2mVrms / 30mVp-p
    • Current < 3mArms ( < 5mArms rating current > 3.5A )
    • Temperature Voltage < 100ppm + 3mV
    • Coefficient( 0 ~ 40°C ) Current < 100ppm + 3mA
    • Read back Resolution Voltage 10mV ( 20mV rating voltage > 36V )
    • Current 1mA ( 2mA rating current > 3.5A )
     
    Instek GPS-4303 New Instek Quad Output Power Supply $410.00

    New Instek GPS-4303 Quad Output Power Supply

    with two year warranty

    Dual 30 volt supplies at 3 amps

    Single 2.2 to 5.2 volt suppy at 1 amps

    Single  8 to 15 volt supply at 1 amp

    FEATURES
    •  Quad Independent DC Output
    •  Four LED Display with 3 digits, selectable for two sets  output voltage and current display simultaneously
    •  Auto Series, Parallel and Tracking Operation
    •  Constant Voltage and Constant Current Operation
    •  Low Ripple and Noise
    •  Overload and Reverse Polarity Protection
    •  Selectable for Continuous/Dynamic Load
    •  Output Enable/Disable Control
    •  Rotation speed of the fan is controlled by heatsink  temperature



     
    Instek GPS-4215 New Instek Quad Output Power Supply $370.00

    New Instek GPS-4215 Quad Output Power Supply

    with two year warranty

    Dual 25 volt supplies at .5 amps

    Single 3 to 6 volt suppy at 2.5 amps

    Single  8 to 15 volt supply at 1 amp

    FEATURES
    •  Quad Independent DC Output
    •  Four LED Display with 3 digits, selectable for two sets  output voltage and current display simultaneously
    •  Auto Series, Parallel and Tracking Operation
    •  Constant Voltage and Constant Current Operation
    •  Low Ripple and Noise
    •  Overload and Reverse Polarity Protection
    •  Selectable for Continuous/Dynamic Load
    •  Output Enable/Disable Control
    •  Rotation speed of the fan is controlled by heatsink  temperature



     
    Instek SPD-3606 New Instek SPD-3606 375 Watt Triple Output Power Supply $845.00
    New Instek SPD-3606 375 Watt Triple Output Power Supply

     

    New Instek SPD-3606 375 Watt Triple Output Power Supply

       Instek Instrument's is announcing its new SPD-3606 DC Power Supply to the global market. The SPD-3606 provides 375W output power with three isolated outputs with dual range Power for CH1/CH2, highly efficient power conversion, low noise, high reliability, thorough protection design, and compact size. The Instek SPD-3606 establishes a new platform for GW Instek switching power supply product line.

       Dual-Range Power CH1/CH2 of SPD-3606 offer dual-range output either at 30V/6A or 60V/3A per channel to accommodate broad applications in one unit. With auto Series/Parallel tracking operation, SPD-3606 is able to provide the master output at 30V/12A, 60V/6A, or 120V/3A. One SPD-3606 can cover three output types and a wide range of output voltage/current combinations. High Efficiency and High Power Density High power conversion efficiency lets SPD-3606 consume less energy and align with global environmental protection concerns. Besides, the high power density makes SPD-3606 weigh less than half and occupy much less space than a linear power supply at the same power rating.

       Thorough Protection Design To avoid the damage over SPD-3606 and DUT caused by improper user operation, The SPD-3606 provides numerous protection features such as reverse polarity protection, OVP (Over Voltage Protection) and OTP (Over Temperature Protection). In case the wrong AC power is connected, SPD-3606 automatically selects 115V/230V source internally.  

     Features 
  • Three Independent, Isolated Output
  • CH3 Output Adjustable: 0.1~5V/3A
  • High Efficiency Power Conversion (Up to 25% More Than Traditional Power Supply)
  • Remote Output On/Off Control
  • OVP, OTP, Reverse Polarity Protection, CH3 Overload Protection
  • Compact Size, Light Weight
  • Low Fan Acoustic Noise with Fan Speed Control Circuit
  • Voltage/Current Protection Knob
    •  
    Instek SPS-1230 New Instek SPS-1230 12V 30A Power Supply $510.00

    New Instek SPS-1230 Power Supply

    with two year warranty

    12 Volts at 30 Amps

    FEATURES
    •  Two Digital Panel Meters
    •  0.01% High Regulation
    •  Constant Voltage and Constant Current Operation
    •  High Efficiency
    •  High Power Density
    •  Overload and Reverse Polarity Protection
     
    Instek SPS-1820 New Instek SPS-1820 18V 20A Power Supply $510.00

    New Instek SPS-1820 18V 20A Power Supply

    with two year warranty

    18 Volts at 20 Amps

    FEATURES
    •  Two Digital Panel Meters
    •  0.01% High Regulation
    •  Constant Voltage and Constant Current Operation
    •  High Efficiency
    •  High Power Density
    •  Overload and Reverse Polarity Protection
     
    Instek SPS-3610 New Instek SPS-3610 36V 10A Power Supply $510.00

    New Instek SPS-3610 36V 10A Power Supply

    with two year warranty

    36 Volts at 10 Amps

    FEATURES
    •  Two Digital Panel Meters
    •  0.01% High Regulation
    •  Constant Voltage and Constant Current Operation
    •  High Efficiency
    •  High Power Density
    •  Overload and Reverse Polarity Protection
     
    Instek SPS-606 New Instek SPS-606 60V 6A Power Supply $510.00

    New Instek SPS-606 60V 6A Power Supply

    with two year warranty

    60 Volts at 6 Amps

    FEATURES
    •  Two Digital Panel Meters
    •  0.01% High Regulation
    •  Constant Voltage and Constant Current Operation
    •  High Efficiency
    •  High Power Density
    •  Overload and Reverse Polarity Protection
     
    Instek GPS-3303 New Instek Triple Output Power Supply $380.00

    New Instek GPS-3303 Triple Output Power Supply

    with two year warranty

    Dual 30 volt supplies at 3 amps

    Single 5 volt supply at 3 amps

    Compare to the Agilent E3631A you may save quite a bit of money if you do not need GPIB

    FEATURES
    •  Triple Independent DC Output
    •  Three LED Display with 3 digits, selectable for two sets  output voltage and current display simultaneously
    •  Auto Series, Parallel and Tracking Operation
    •  Constant Voltage and Constant Current Operation
    •  Low Ripple and Noise
    •  Overload and Reverse Polarity Protection
    •  Selectable for Continuous/Dynamic Load
    •  Output Enable/Disable Control
    •  Rotation speed of the fan is controlled by heat sink  temperature



     
    Ohm Loads OLP175V New Kwatt OLP175V 175 Volt 8 Amp DC Unregulated Power Supply $2,999.00
    New Kwatt OLP175V 175 Volt 8 Amp DC Unregulated Power Supply

     

    New Kwatt OLP175V 175 Volt 8 Amp DC Unregulated Power Supply

    Available for rentals and leases please call for details

       OHM LOADS INC. introduces the KWATT series, a comprehensive line of high power unregulated DC and AC power supplies for bench-top and rack-mount applications. The KWATT series is adjustable using a variable output voltage control dial, supplying a source of 0-1.3KW DC or 0-2KVA AC power in a single unit. The OLP24V ranges from 0-24VDC and 0-20VAC. The OLP75V ranges from 0-75VDC and 0-55VAC. The OLP175V ranges from 0-175VDC and 0-125VAC. The OLP350V ranges from 0-350VDC and 0-250VAC. The input ranges from 105-130VAC. All models feature over-current protection.  

       The front panels feature output DC/AC selection switch(es), a variable output voltage control dial (0-100%), DC and AC analog voltage and current meters and an AC power switch. The rear panels feature 3/8¿ bolt-type or five-way banana jack binding posts for output connections, a world standard IEC AC input connector, input/output panel fuses and/or output breakers. The floating output allows for positive and negative output application flexibility.  Maximum output ripple is 1.5% rms. All units are convection cooled except the OLP24V, which has a small 115VAC fan. All units can be run at full rated power from 0-40 °C, linearly derated to zero at 70 °C.  All these features are packaged in standard bench-top/19" rack-mount chassis (17.5"W x 8.75"H x 15"L). 

       Applications for the KWATT series include R and D testing, trouble-shooting, production testing, in-coming inspection and burn-in of transformers, motor drives, lamps, relays, actuators, servo controls, steppers, DC-DC converters, DC-AC inverters, power systems, magnets, amplifiers, etc.  Useful everywhere an extremely rugged, reliable and economical versatile DC and AC power supply is required. 

       The KWATT series is ideally suited for applications where tight regulation is not needed, but cost and reliability are important.  Since KWATT is unregulated it will not interact in any way with the loads connected to it.  Unlike most regulated supplies, KWATT is very RUGGED with a high overload specification and is forgiving during misuse.  The KWATT series is also very economical when compared to regulated power supplies or "in-house" built units.  When companies build their own "in-house" power supplies many associated costs are overlooked.  These "hidden" costs such as engineering and development time, manufacturing, documentation, trouble-shooting and maintenance, overhead, purchasing, etc. can make these "in-house" supplies very expensive and divert valuable time away from the company's main products.  KWATT has power for virtually every application covering most voltages and currents eliminating the need to build "in-house" supplies.

       The KWATT series provides the user with an unparalleled amount of flexibility and ease of use.  Simply hook-up the load.

     
    Ohm Loads OLP24V New Kwatt OLP24V 24 Volt 55 Amp DC Unregulated Power Supply $2,999.00
    New Kwatt OLP24V 24 Volt 55 Amp DC Unregulated Power Supply

     

    New Kwatt OLP24V 24 Volt 55 Amp DC Unregulated Power Supply

    Available for rentals and leases please call for details

       OHM LOADS INC. introduces the KWATT series, a comprehensive line of high power unregulated DC and AC power supplies for bench-top and rack-mount applications. The KWATT series is adjustable using a variable output voltage control dial, supplying a source of 0-1.3KW DC or 0-2KVA AC power in a single unit. The OLP24V ranges from 0-24VDC and 0-20VAC. The OLP75V ranges from 0-75VDC and 0-55VAC. The OLP175V ranges from 0-175VDC and 0-125VAC. The OLP350V ranges from 0-350VDC and 0-250VAC. The input ranges from 105-130VAC. All models feature over-current protection.  

       The front panels feature output DC/AC selection switch(es), a variable output voltage control dial (0-100%), DC and AC analog voltage and current meters and an AC power switch. The rear panels feature 3/8¿ bolt-type or five-way banana jack binding posts for output connections, a world standard IEC AC input connector, input/output panel fuses and/or output breakers. The floating output allows for positive and negative output application flexibility.  Maximum output ripple is 1.5% rms. All units are convection cooled except the OLP24V, which has a small 115VAC fan. All units can be run at full rated power from 0-40 °C, linearly derated to zero at 70 °C.  All these features are packaged in standard bench-top/19" rack-mount chassis (17.5"W x 8.75"H x 15"L). 

       Applications for the KWATT series include R and D testing, trouble-shooting, production testing, in-coming inspection and burn-in of transformers, motor drives, lamps, relays, actuators, servo controls, steppers, DC-DC converters, DC-AC inverters, power systems, magnets, amplifiers, etc.  Useful everywhere an extremely rugged, reliable and economical versatile DC and AC power supply is required. 

       The KWATT series is ideally suited for applications where tight regulation is not needed, but cost and reliability are important.  Since KWATT is unregulated it will not interact in any way with the loads connected to it.  Unlike most regulated supplies, KWATT is very RUGGED with a high overload specification and is forgiving during misuse.  The KWATT series is also very economical when compared to regulated power supplies or "in-house" built units.  When companies build their own "in-house" power supplies many associated costs are overlooked.  These "hidden" costs such as engineering and development time, manufacturing, documentation, trouble-shooting and maintenance, overhead, purchasing, etc. can make these "in-house" supplies very expensive and divert valuable time away from the company's main products.  KWATT has power for virtually every application covering most voltages and currents eliminating the need to build "in-house" supplies.

       The KWATT series provides the user with an unparalleled amount of flexibility and ease of use.  Simply hook-up the load.

     
    Ohm Loads OLP350V New Kwatt OLP350V 350 Volt 4 Amp DC Unregulated Power Supply $2,999.00
    New Kwatt OLP350V 350 Volt 4 Amp DC Unregulated Power Supply

     

    New Kwatt OLP350V 350 Volt 4 Amp DC Unregulated Power Supply

    Available for rentals and leases please call for details

       OHM LOADS INC. introduces the KWATT series, a comprehensive line of high power unregulated DC and AC power supplies for bench-top and rack-mount applications. The KWATT series is adjustable using a variable output voltage control dial, supplying a source of 0-1.3KW DC or 0-2KVA AC power in a single unit. The OLP24V ranges from 0-24VDC and 0-20VAC. The OLP75V ranges from 0-75VDC and 0-55VAC. The OLP175V ranges from 0-175VDC and 0-125VAC. The OLP350V ranges from 0-350VDC and 0-250VAC. The input ranges from 105-130VAC. All models feature over-current protection.  

       The front panels feature output DC/AC selection switch(es), a variable output voltage control dial (0-100%), DC and AC analog voltage and current meters and an AC power switch. The rear panels feature 3/8¿ bolt-type or five-way banana jack binding posts for output connections, a world standard IEC AC input connector, input/output panel fuses and/or output breakers. The floating output allows for positive and negative output application flexibility.  Maximum output ripple is 1.5% rms. All units are convection cooled except the OLP24V, which has a small 115VAC fan. All units can be run at full rated power from 0-40 °C, linearly derated to zero at 70 °C.  All these features are packaged in standard bench-top/19" rack-mount chassis (17.5"W x 8.75"H x 15"L). 

       Applications for the KWATT series include R and D testing, trouble-shooting, production testing, in-coming inspection and burn-in of transformers, motor drives, lamps, relays, actuators, servo controls, steppers, DC-DC converters, DC-AC inverters, power systems, magnets, amplifiers, etc.  Useful everywhere an extremely rugged, reliable and economical versatile DC and AC power supply is required. 

       The KWATT series is ideally suited for applications where tight regulation is not needed, but cost and reliability are important.  Since KWATT is unregulated it will not interact in any way with the loads connected to it.  Unlike most regulated supplies, KWATT is very RUGGED with a high overload specification and is forgiving during misuse.  The KWATT series is also very economical when compared to regulated power supplies or "in-house" built units.  When companies build their own "in-house" power supplies many associated costs are overlooked.  These "hidden" costs such as engineering and development time, manufacturing, documentation, trouble-shooting and maintenance, overhead, purchasing, etc. can make these "in-house" supplies very expensive and divert valuable time away from the company's main products.  KWATT has power for virtually every application covering most voltages and currents eliminating the need to build "in-house" supplies.

       The KWATT series provides the user with an unparalleled amount of flexibility and ease of use.  Simply hook-up the load.

     
    Ohm Loads OLP75V New Kwatt OLP75V 75 Volt 18 Amp DC Unregulated Power Supply $2,999.00
    New Kwatt OLP75V 75 Volt 18 Amp DC Unregulated Power Supply

     

    New Kwatt OLP75V 75 Volt 18 Amp DC Unregulated Power Supply

    Available for rentals and leases please call for details

    Perfect for 48 Volt Telecom Applications

       OHM LOADS INC. introduces the KWATT series, a comprehensive line of high power unregulated DC and AC power supplies for bench-top and rack-mount applications. The KWATT series is adjustable using a variable output voltage control dial, supplying a source of 0-1.3KW DC or 0-2KVA AC power in a single unit. The OLP24V ranges from 0-24VDC and 0-20VAC. The OLP75V ranges from 0-75VDC and 0-55VAC. The OLP175V ranges from 0-175VDC and 0-125VAC. The OLP350V ranges from 0-350VDC and 0-250VAC. The input ranges from 105-130VAC. All models feature over-current protection.  

       The front panels feature output DC/AC selection switch(es), a variable output voltage control dial (0-100%), DC and AC analog voltage and current meters and an AC power switch. The rear panels feature 3/8¿ bolt-type or five-way banana jack binding posts for output connections, a world standard IEC AC input connector, input/output panel fuses and/or output breakers. The floating output allows for positive and negative output application flexibility.  Maximum output ripple is 1.5% rms. All units are convection cooled except the OLP24V, which has a small 115VAC fan. All units can be run at full rated power from 0-40 °C, linearly derated to zero at 70 °C.  All these features are packaged in standard bench-top/19" rack-mount chassis (17.5"W x 8.75"H x 15"L). 

       Applications for the KWATT series include R and D testing, trouble-shooting, production testing, in-coming inspection and burn-in of transformers, motor drives, lamps, relays, actuators, servo controls, steppers, DC-DC converters, DC-AC inverters, power systems, magnets, amplifiers, etc.  Useful everywhere an extremely rugged, reliable and economical versatile DC and AC power supply is required. 

       The KWATT series is ideally suited for applications where tight regulation is not needed, but cost and reliability are important.  Since KWATT is unregulated it will not interact in any way with the loads connected to it.  Unlike most regulated supplies, KWATT is very RUGGED with a high overload specification and is forgiving during misuse.  The KWATT series is also very economical when compared to regulated power supplies or "in-house" built units.  When companies build their own "in-house" power supplies many associated costs are overlooked.  These "hidden" costs such as engineering and development time, manufacturing, documentation, trouble-shooting and maintenance, overhead, purchasing, etc. can make these "in-house" supplies very expensive and divert valuable time away from the company's main products.  KWATT has power for virtually every application covering most voltages and currents eliminating the need to build "in-house" supplies.

       The KWATT series provides the user with an unparalleled amount of flexibility and ease of use.  Simply hook-up the load.

     
    Madell TPR3005-3C New Madell Triple Output 5A Power Supply TPR3005-3C $258.00
    New Page 1

     

    New Madell Triple Output 5A Power Supply TPR3005-3C

    Two variable outputs, 30V/5A, 30V/5A.One fixed 5V/5A output.

    110V AC input. Adjustable current limit. Overload protection.

     
     
    Quadtech/Genrad 42006-100-25 New Quadtech 42006-100-25 100 Volt 25 Amp Power Supply $1,865.00
    New Quadtech 42006-100-25 100 Volt 25 Amp Power Supply

     

    New Quadtech 42006-100-25 100 Volt 25 Amp Power Supply

    May be available for rentals please call

       QuadTech's new 42000 Series© of programmable DC power supplies offer many unique advantages for ATE integration and testing. These advantages include a constant power operating envelope, precision readback of output current and voltage, output trigger signals, as well as, the ability to create complex DC transients waveforms to test device behavior to spikes, drops and other voltage deviations. Designed for automated testing DC-DC converters and similar products, the 42000 sets a new standard for high accuracy programmable DC supplies.    The 42000 Series includes nine different models ranging from 600W to 5000W, up to 120A and up to 600V. Due to their constant power operating envelope, a single instrument can provide both high voltage/low current and low voltage/high current, thereby reducing the number of supplies needed in typical ATE applications.

    Features

    • Nine Models to choose from

    • Wide range of voltage & current combination with constant power

    • Voltage range: 0 - 600W Current range: 0 - 120A Power range: 600W, 1200W, 2400W, 5000W

    • Digital encoder knobs, keypad and function keys

    • Power Factor Correction (0.95)

    • High-speed Programming

    • Precision V&I Measurements

    • Current sharing for parallel operation with Master Slave Control

    • Auto Sequencing Programming: 10 Programs / 100 Sequences / 8 bit TTL

    • Voltage & Current Slow Rate Control

    • OVP, Current Limit, Thermal protection

    • Remote sense, 5V line loss compensation

    • APG (Analog Programmable Interface) with Isolated Analog Interface Card

    • Optional GPIB control with SCPI

    • Standard RS-232 interface

    • LabView and LabWindows

    • CE Certified

    • Standard USB interface

     

       The 42000 Series includes a 16-bit readback capability for accurate voltage and current readings. This means, systems no longer need complex shunt/multiplexers to make accurate readings of the UUT's input parameters. The instruments also include I/O ports providing 8-bit TTLs, DC-ON, fault output signal and remote inhibit, as well as, an output trigger signal for system timing measurements. Another unique capability of the 42000 Series supplies is their ability to create complex DC transient waveforms. This capability allows devices to be tested to DC voltage dropouts, spikes and other voltage variations making them an ideal choice for airborne device testing, inverter testing and other devices which will experience voltage interrupts. Applications include DC/DC Converter & Inverter voltage drop test, engine startup simulation, battery automated charging, electronic product life cycle test, etc.
     
    Quadtech/Genrad 4206-300-8 New Quadtech 42006-300-8 300 Volt 8 Amp Power Supply $1,865.00
    New Quadtech 42006-300-8 300 Volt 8 Amp Power Supply

     

    New Quadtech 42006-300-8 300 Volt 8 Amp Power Supply

    May be available for rentals please call

       QuadTech's new 42000 Series© of programmable DC power supplies offer many unique advantages for ATE integration and testing. These advantages include a constant power operating envelope, precision readback of output current and voltage, output trigger signals, as well as, the ability to create complex DC transients waveforms to test device behavior to spikes, drops and other voltage deviations. Designed for automated testing DC-DC converters and similar products, the 42000 sets a new standard for high accuracy programmable DC supplies.    The 42000 Series includes nine different models ranging from 600W to 5000W, up to 120A and up to 600V. Due to their constant power operating envelope, a single instrument can provide both high voltage/low current and low voltage/high current, thereby reducing the number of supplies needed in typical ATE applications.

    Features

    • Nine Models to choose from

    • Wide range of voltage & current combination with constant power

    • Voltage range: 0 - 600W Current range: 0 - 120A Power range: 600W, 1200W, 2400W, 5000W

    • Digital encoder knobs, keypad and function keys

    • Power Factor Correction (0.95)

    • High-speed Programming

    • Precision V&I Measurements

    • Current sharing for parallel operation with Master Slave Control

    • Auto Sequencing Programming: 10 Programs / 100 Sequences / 8 bit TTL

    • Voltage & Current Slow Rate Control

    • OVP, Current Limit, Thermal protection

    • Remote sense, 5V line loss compensation

    • APG (Analog Programmable Interface) with Isolated Analog Interface Card

    • Optional GPIB control with SCPI

    • Standard RS-232 interface

    • LabView and LabWindows

    • CE Certified

    • Standard USB interface

     

       The 42000 Series includes a 16-bit readback capability for accurate voltage and current readings. This means, systems no longer need complex shunt/multiplexers to make accurate readings of the UUT's input parameters. The instruments also include I/O ports providing 8-bit TTLs, DC-ON, fault output signal and remote inhibit, as well as, an output trigger signal for system timing measurements. Another unique capability of the 42000 Series supplies is their ability to create complex DC transient waveforms. This capability allows devices to be tested to DC voltage dropouts, spikes and other voltage variations making them an ideal choice for airborne device testing, inverter testing and other devices which will experience voltage interrupts. Applications include DC/DC Converter & Inverter voltage drop test, engine startup simulation, battery automated charging, electronic product life cycle test, etc.
     
    Quadtech/Genrad 42012-100-50 New Quadtech 42012-100-50 100 Volt 50 Amp Power Supply $2,195.00
    New Quadtech 42012-100-50 100 Volt 50 Amp Power Supply

     

    New Quadtech 42012-100-50 100 Volt 50 Amp Power Supply

    May be available for rentals please call

       QuadTech's new 42000 Series© of programmable DC power supplies offer many unique advantages for ATE integration and testing. These advantages include a constant power operating envelope, precision readback of output current and voltage, output trigger signals, as well as, the ability to create complex DC transients waveforms to test device behavior to spikes, drops and other voltage deviations. Designed for automated testing DC-DC converters and similar products, the 42000 sets a new standard for high accuracy programmable DC supplies.    The 42000 Series includes nine different models ranging from 600W to 5000W, up to 120A and up to 600V. Due to their constant power operating envelope, a single instrument can provide both high voltage/low current and low voltage/high current, thereby reducing the number of supplies needed in typical ATE applications.

    Features

    • Nine Models to choose from

    • Wide range of voltage & current combination with constant power

    • Voltage range: 0 - 600W Current range: 0 - 120A Power range: 600W, 1200W, 2400W, 5000W

    • Digital encoder knobs, keypad and function keys

    • Power Factor Correction (0.95)

    • High-speed Programming

    • Precision V&I Measurements

    • Current sharing for parallel operation with Master Slave Control

    • Auto Sequencing Programming: 10 Programs / 100 Sequences / 8 bit TTL

    • Voltage & Current Slow Rate Control

    • OVP, Current Limit, Thermal protection

    • Remote sense, 5V line loss compensation

    • APG (Analog Programmable Interface) with Isolated Analog Interface Card

    • Optional GPIB control with SCPI

    • Standard RS-232 interface

    • LabView and LabWindows

    • CE Certified

    • Standard USB interface

     

       The 42000 Series includes a 16-bit readback capability for accurate voltage and current readings. This means, systems no longer need complex shunt/multiplexers to make accurate readings of the UUT's input parameters. The instruments also include I/O ports providing 8-bit TTLs, DC-ON, fault output signal and remote inhibit, as well as, an output trigger signal for system timing measurements. Another unique capability of the 42000 Series supplies is their ability to create complex DC transient waveforms. This capability allows devices to be tested to DC voltage dropouts, spikes and other voltage variations making them an ideal choice for airborne device testing, inverter testing and other devices which will experience voltage interrupts. Applications include DC/DC Converter & Inverter voltage drop test, engine startup simulation, battery automated charging, electronic product life cycle test, etc.
     
    Quadtech/Genrad 42012-40-120 New Quadtech 42012-40-120 40 Volt 120 Amp Power Supply $2,495.00
    New Quadtech 42012-40-120 40 Volt 120 Amp Power Supply

     

    New Quadtech 42012-40-120 40 Volt 120 Amp Power Supply

    May be available for rentals please call

       QuadTech's new 42000 Series© of programmable DC power supplies offer many unique advantages for ATE integration and testing. These advantages include a constant power operating envelope, precision readback of output current and voltage, output trigger signals, as well as, the ability to create complex DC transients waveforms to test device behavior to spikes, drops and other voltage deviations. Designed for automated testing DC-DC converters and similar products, the 42000 sets a new standard for high accuracy programmable DC supplies.    The 42000 Series includes nine different models ranging from 600W to 5000W, up to 120A and up to 600V. Due to their constant power operating envelope, a single instrument can provide both high voltage/low current and low voltage/high current, thereby reducing the number of supplies needed in typical ATE applications.

    Features

    • Nine Models to choose from

    • Wide range of voltage & current combination with constant power

    • Voltage range: 0 - 600W Current range: 0 - 120A Power range: 600W, 1200W, 2400W, 5000W

    • Digital encoder knobs, keypad and function keys

    • Power Factor Correction (0.95)

    • High-speed Programming

    • Precision V&I Measurements

    • Current sharing for parallel operation with Master Slave Control

    • Auto Sequencing Programming: 10 Programs / 100 Sequences / 8 bit TTL

    • Voltage & Current Slow Rate Control

    • OVP, Current Limit, Thermal protection

    • Remote sense, 5V line loss compensation

    • APG (Analog Programmable Interface) with Isolated Analog Interface Card

    • Optional GPIB control with SCPI

    • Standard RS-232 interface

    • LabView and LabWindows

    • CE Certified

    • Standard USB interface

     

       The 42000 Series includes a 16-bit readback capability for accurate voltage and current readings. This means, systems no longer need complex shunt/multiplexers to make accurate readings of the UUT's input parameters. The instruments also include I/O ports providing 8-bit TTLs, DC-ON, fault output signal and remote inhibit, as well as, an output trigger signal for system timing measurements. Another unique capability of the 42000 Series supplies is their ability to create complex DC transient waveforms. This capability allows devices to be tested to DC voltage dropouts, spikes and other voltage variations making them an ideal choice for airborne device testing, inverter testing and other devices which will experience voltage interrupts. Applications include DC/DC Converter & Inverter voltage drop test, engine startup simulation, battery automated charging, electronic product life cycle test, etc.
     
    Quadtech/Genrad 42012-600-8 New Quadtech 42012-600-8 600 Volt 8 Amp Power Supply $2,195.00
    New Quadtech 42012-600-8 600 Volt 8 Amp Power Supply

     

    New Quadtech 42012-600-8 600 Volt 8 Amp Power Supply

    May be available for rentals please call

       QuadTech's new 42000 Series© of programmable DC power supplies offer many unique advantages for ATE integration and testing. These advantages include a constant power operating envelope, precision readback of output current and voltage, output trigger signals, as well as, the ability to create complex DC transients waveforms to test device behavior to spikes, drops and other voltage deviations. Designed for automated testing DC-DC converters and similar products, the 42000 sets a new standard for high accuracy programmable DC supplies.    The 42000 Series includes nine different models ranging from 600W to 5000W, up to 120A and up to 600V. Due to their constant power operating envelope, a single instrument can provide both high voltage/low current and low voltage/high current, thereby reducing the number of supplies needed in typical ATE applications.

    Features

    • Nine Models to choose from

    • Wide range of voltage & current combination with constant power

    • Voltage range: 0 - 600W Current range: 0 - 120A Power range: 600W, 1200W, 2400W, 5000W

    • Digital encoder knobs, keypad and function keys

    • Power Factor Correction (0.95)

    • High-speed Programming

    • Precision V&I Measurements

    • Current sharing for parallel operation with Master Slave Control

    • Auto Sequencing Programming: 10 Programs / 100 Sequences / 8 bit TTL

    • Voltage & Current Slow Rate Control

    • OVP, Current Limit, Thermal protection

    • Remote sense, 5V line loss compensation

    • APG (Analog Programmable Interface) with Isolated Analog Interface Card

    • Optional GPIB control with SCPI

    • Standard RS-232 interface

    • LabView and LabWindows

    • CE Certified

    • Standard USB interface

     

       The 42000 Series includes a 16-bit readback capability for accurate voltage and current readings. This means, systems no longer need complex shunt/multiplexers to make accurate readings of the UUT's input parameters. The instruments also include I/O ports providing 8-bit TTLs, DC-ON, fault output signal and remote inhibit, as well as, an output trigger signal for system timing measurements. Another unique capability of the 42000 Series supplies is their ability to create complex DC transient waveforms. This capability allows devices to be tested to DC voltage dropouts, spikes and other voltage variations making them an ideal choice for airborne device testing, inverter testing and other devices which will experience voltage interrupts. Applications include DC/DC Converter & Inverter voltage drop test, engine startup simulation, battery automated charging, electronic product life cycle test, etc.
     
    Quadtech/Genrad 42012-80-60 New Quadtech 42012-80-60 80 Volt 60 Amp Power Supply $2,195.00
    New Quadtech 42012-80-60 80 Volt 60 Amp Power Supply

     

    New Quadtech 42012-80-60 80 Volt 60 Amp Power Supply

    May be available for rentals please call

       QuadTech's new 42000 Series© of programmable DC power supplies offer many unique advantages for ATE integration and testing. These advantages include a constant power operating envelope, precision readback of output current and voltage, output trigger signals, as well as, the ability to create complex DC transients waveforms to test device behavior to spikes, drops and other voltage deviations. Designed for automated testing DC-DC converters and similar products, the 42000 sets a new standard for high accuracy programmable DC supplies.    The 42000 Series includes nine different models ranging from 600W to 5000W, up to 120A and up to 600V. Due to their constant power operating envelope, a single instrument can provide both high voltage/low current and low voltage/high current, thereby reducing the number of supplies needed in typical ATE applications.

    Features

    • Nine Models to choose from

    • Wide range of voltage & current combination with constant power

    • Voltage range: 0 - 600W Current range: 0 - 120A Power range: 600W, 1200W, 2400W, 5000W

    • Digital encoder knobs, keypad and function keys

    • Power Factor Correction (0.95)

    • High-speed Programming

    • Precision V&I Measurements

    • Current sharing for parallel operation with Master Slave Control

    • Auto Sequencing Programming: 10 Programs / 100 Sequences / 8 bit TTL

    • Voltage & Current Slow Rate Control

    • OVP, Current Limit, Thermal protection

    • Remote sense, 5V line loss compensation

    • APG (Analog Programmable Interface) with Isolated Analog Interface Card

    • Optional GPIB control with SCPI

    • Standard RS-232 interface

    • LabView and LabWindows

    • CE Certified

    • Standard USB interface

     

       The 42000 Series includes a 16-bit readback capability for accurate voltage and current readings. This means, systems no longer need complex shunt/multiplexers to make accurate readings of the UUT's input parameters. The instruments also include I/O ports providing 8-bit TTLs, DC-ON, fault output signal and remote inhibit, as well as, an output trigger signal for system timing measurements. Another unique capability of the 42000 Series supplies is their ability to create complex DC transient waveforms. This capability allows devices to be tested to DC voltage dropouts, spikes and other voltage variations making them an ideal choice for airborne device testing, inverter testing and other devices which will experience voltage interrupts. Applications include DC/DC Converter & Inverter voltage drop test, engine startup simulation, battery automated charging, electronic product life cycle test, etc.
     
    Quadtech/Genrad 42024-80-60 New Quadtech 42024-80-60 80 Volt 60 Amp Power Supply $2,195.00
    New Quadtech 42024-80-60 80 Volt 60 Amp Power Supply

     

    New Quadtech 42024-80-60 80 Volt 60 Amp Power Supply

    May be available for rentals please call

       QuadTech's new 42000 Series© of programmable DC power supplies offer many unique advantages for ATE integration and testing. These advantages include a constant power operating envelope, precision readback of output current and voltage, output trigger signals, as well as, the ability to create complex DC transients waveforms to test device behavior to spikes, drops and other voltage deviations. Designed for automated testing DC-DC converters and similar products, the 42000 sets a new standard for high accuracy programmable DC supplies.    The 42000 Series includes nine different models ranging from 600W to 5000W, up to 120A and up to 600V. Due to their constant power operating envelope, a single instrument can provide both high voltage/low current and low voltage/high current, thereby reducing the number of supplies needed in typical ATE applications.

    Features

    • Nine Models to choose from

    • Wide range of voltage & current combination with constant power

    • Voltage range: 0 - 600W Current range: 0 - 120A Power range: 600W, 1200W, 2400W, 5000W

    • Digital encoder knobs, keypad and function keys

    • Power Factor Correction (0.95)

    • High-speed Programming

    • Precision V&I Measurements

    • Current sharing for parallel operation with Master Slave Control

    • Auto Sequencing Programming: 10 Programs / 100 Sequences / 8 bit TTL

    • Voltage & Current Slow Rate Control

    • OVP, Current Limit, Thermal protection

    • Remote sense, 5V line loss compensation

    • APG (Analog Programmable Interface) with Isolated Analog Interface Card

    • Optional GPIB control with SCPI

    • Standard RS-232 interface

    • LabView and LabWindows

    • CE Certified

    • Standard USB interface

     

       The 42000 Series includes a 16-bit readback capability for accurate voltage and current readings. This means, systems no longer need complex shunt/multiplexers to make accurate readings of the UUT's input parameters. The instruments also include I/O ports providing 8-bit TTLs, DC-ON, fault output signal and remote inhibit, as well as, an output trigger signal for system timing measurements. Another unique capability of the 42000 Series supplies is their ability to create complex DC transient waveforms. This capability allows devices to be tested to DC voltage dropouts, spikes and other voltage variations making them an ideal choice for airborne device testing, inverter testing and other devices which will experience voltage interrupts. Applications include DC/DC Converter & Inverter voltage drop test, engine startup simulation, battery automated charging, electronic product life cycle test, etc.
     
    Quadtech/Genrad 42050-100-100 New Quadtech 42050-100-100 100 Volt 100 Amp Power Supply $5,595.00
    New Quadtech 42050-100-100 100 Volt 100 Amp Power Supply

     

    New Quadtech 42050-100-100 100 Volt 100 Amp Power Supply

    May be available for rentals please call

       QuadTech's new 42000 Series© of programmable DC power supplies offer many unique advantages for ATE integration and testing. These advantages include a constant power operating envelope, precision readback of output current and voltage, output trigger signals, as well as, the ability to create complex DC transients waveforms to test device behavior to spikes, drops and other voltage deviations. Designed for automated testing DC-DC converters and similar products, the 42000 sets a new standard for high accuracy programmable DC supplies.    The 42000 Series includes nine different models ranging from 600W to 5000W, up to 120A and up to 600V. Due to their constant power operating envelope, a single instrument can provide both high voltage/low current and low voltage/high current, thereby reducing the number of supplies needed in typical ATE applications.

    Features

    • Nine Models to choose from

    • Wide range of voltage & current combination with constant power

    • Voltage range: 0 - 600W Current range: 0 - 120A Power range: 600W, 1200W, 2400W, 5000W

    • Digital encoder knobs, keypad and function keys

    • Power Factor Correction (0.95)

    • High-speed Programming

    • Precision V&I Measurements

    • Current sharing for parallel operation with Master Slave Control

    • Auto Sequencing Programming: 10 Programs / 100 Sequences / 8 bit TTL

    • Voltage & Current Slow Rate Control

    • OVP, Current Limit, Thermal protection

    • Remote sense, 5V line loss compensation

    • APG (Analog Programmable Interface) with Isolated Analog Interface Card

    • Optional GPIB control with SCPI

    • Standard RS-232 interface

    • LabView and LabWindows

    • CE Certified

    • Standard USB interface

     

       The 42000 Series includes a 16-bit readback capability for accurate voltage and current readings. This means, systems no longer need complex shunt/multiplexers to make accurate readings of the UUT's input parameters. The instruments also include I/O ports providing 8-bit TTLs, DC-ON, fault output signal and remote inhibit, as well as, an output trigger signal for system timing measurements. Another unique capability of the 42000 Series supplies is their ability to create complex DC transient waveforms. This capability allows devices to be tested to DC voltage dropouts, spikes and other voltage variations making them an ideal choice for airborne device testing, inverter testing and other devices which will experience voltage interrupts. Applications include DC/DC Converter & Inverter voltage drop test, engine startup simulation, battery automated charging, electronic product life cycle test, etc.
     
    Sorensen DCR40-13B Sorensen DCR40-13B ,40V 13A Power Supply Contact Sales
    Lab Power Supply, 0-40V @ 13A, 0, 25% I Reg, 0.03% Volt Reg, 0.225% ripple Remote programming of V & I
     
    Sorensen DCR60-9B Sorensen DCR60-9B ,60V 9A Power Supply Contact Sales
    with manual and leads, , Range 2 to 600V AC/DC Current 2 mA to 10A AC/DC Auto Power Off Autoranging with Range Hold Continuity Check Beeper Data Hold Diode Test Low Battery Indicator Memory Offset Overrange Indicator
     
    Sorensen DCR600=16T Sorensen DCR600-16T 600 Volt 16 Amp Power Supply Contact Sales
    Sorensen DCR600-16T 600 Volt 16 Amp Power Supply

     

    Sorensen DCR600-16T 600 Volt 16 Amp Power Supply

    Rent me for $400 a month

     The Sorensen DCR600-16T Power Supply is a high power lab/industrial power supply is specifically designed to meet today's requirement for sophisticated control and product styling of the high power burn-in market. The Sorensen DCR600-16T power supplies are constant current/constant voltage supplies with an automatic crossover feature. The DCR Series models provides up to 10000 watts. The unit is rated at an incredible 0 to 600 volts dc at 16 amps. Voltage regulation is rated at 300-600 mV (0.1%) Programmable outputs from front panel or remote from rear panel. Digitally metered from the front panel. Requires three phase 208 volt input at 41 amps minimum per phase. Shipping weight estimated at 400 pounds. Must be shipped on a pallet by truck freight due to weight.
     
    Sorensen DCS40-75 Sorenson DCR40-75 40 Volt 75 Amp Power Supply $1,499.00
    Sorenson DCR40-75 40 Volt 75 Amp Power Supply

     

    Sorenson DCR40-75 40 Volt 75 Amp Power Supply

    Rent me for $400 a month

       The Sorenson DCS40-75 Power Supply is a 3000W supply designed to provide highly stable continuously variable output voltage and current for a broad range of development system and burn-in applications. The Sorenson DCS40-75 3 kW Models have push button control of the output standby mode, OVP reset, remote/local programming and preview status of voltage, current and OVP set points.

    Input Power Requirements

    Input Voltage and Frequency

    • 3 kW: 190-250 VAC, three phase, 14A typical, 47-63 Hz; or 200-250 VAC, single phase, 26A typical, 47-63 Hz
    • Note: Maximum power output of 3 kW supplies must be limited to 2.5 kW for single phase input
    • Soft Start: Line current is lower than full load peak value during turn-on or power application after restart

    General

    • Operating Temperature: 0°C to 50°C (no derating), 50°C to 70°C (derate 2%/°C above 50°C)

    • Storage Temperature: -55°C to 85°C

    • Humidity Range: 0 to 80% RH, non condensing

    • Meter Accuracy: 1% of full scale + 1 count

    • Max. Voltage Differential from Output to Safety Ground 150 VDC

    • Remote Start/Stop and Interlock: TTL compatible input or 12-250 VAC (12-130 VDC) or a contact closure

    • Cooling: Internal fan, over temperature shutdown at internal heat sink temperature of 90°C

    • Remote Sense: The maximum allowed sense line drop is 1V (0.5V on the DCS 8-125E model)

    • Remote Programming: External jumper via rear panel connector J3

    • Overvoltage Protection: Crowbar type adjustable from 5-110% of rated output using front panel control (local or remote program selectable via J3 jumper)

    Voltage Resolution: 0.02%

    Regulation (Line or Load)

    • Voltage: 0.1%

    • Current: 0.1%

    Transient Response: Typically recovers in <1 ms to 1% of steady-state output voltage (within 1% of Vmax) for 70-100% or 100-70% load change. 500 μs typical

    Stability: ±0.05% of maximum voltage or current over 8 hours after 30 minute warm up time at fixed line, load and temperature

    Temperature Coefficient: 0.02%/°C of maximum output voltage; 0.03%/°C of maximum output current
     
    Sorensen DCS150-7E Sorenson DCS150-7E 150 Volt 7 Amp Power Supply Contact Sales
    Sorenson DCS150-7E 150 Volt 7 Amp Power Supply

     

    Sorenson DCS150-7E 150 Volt 7 Amp Power Supply

    Rent me for $200 a month

       The Sorenson DCS Series 1kW programmable power supplies incorporate current mode switching in a high power density, low profile package. The DCS provides continuous full output power in a variety of volt/amp combinations. An optional IEEE-488 interface allows integration into any standard ATE system.
    • 1000 Watts in a 19lb., 1.75" high chassis
    • Line and load regulation of 0.1%
    • Selectable remote programming constants for voltage, current and OVP
    • 230 VAC input, optional 115VAC
    • Optional IEEE-488 interface, with V/I readback and adjustable OVP
    • Optional isolated analog programming
    • CE Mark

    Specifications

    • DC Power Supply Output Ratings: Output Voltage 0 - 150V Output Current 0 - 7A Output Power 1020W
    • Line Regulation: Voltage 600mV Current 1.7mA
    • Load Regulation: Voltage 600mV Current 1.7mA
    • Meter Accuracy: Voltage 7.0V Current 0.018A
    • OVP Adjusment Range: 30 - 660V Output Noise and Ripple (V) rms 100mV p-p 500mV (20Hz - 20MHz)

    Input
    Voltage:     200-250 VAC, (100-132 VAC internal jumper selectable)
    Frequency: 47-63Hz
    Soft Start: Line current ramp up to full load on power turn-on

    Output
    Regulation:     Line & Load 0.1% max (0.2% combined)
    Efficiency: 80% typical
    Noise Ripple: 10mV-100mV rms, varies by model
    Transient Response: 500us typical for 30% step load change

    General
    Operating Temperature Range:     0 - 70C, (derate 2%/ C above 50 C)
    Remote Programming: Resistance and voltage programming via J3 external connector.
    Analog Programming Linearity: ± 1%
    Overvoltage Protection: Crowbar type, adjustable 5-110% of rated output
    Dimensions: 1.75"h x 19"w x 19"d
     
    Sorensen DCS40-25 Sorenson DCS40-25 40 Volt 25 Amp Power Supply Contact Sales
    Sorenson DCS40-25 40 Volt 25 Amp Power Supply

     

    Sorenson DCS40-25 40 Volt 25 Amp Power Supply

    Rent me for $150 a month

     

    40 Volts at 25 Amps

    The DCS40-25 is ideally suited for a wide range of applications requiring DC power in a small form factor. Applications range from manufacturing test of automotive components, telecommunications products and avionics to beam steering, process control and laboratory R&D use.
    This family has 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and overvoltage protection, status and constant voltage/current mode operation.

    Input Voltage and Frequency 1 kW: 200-250 VAC, single phase, 8A typical, 47-63 Hz; or 100-132 VAC, single phase, 15A typical, 47-63 Hz, internal jumper selectable (see M1 option)

    Operating Temperature: 0°C to 50°C (no derating), 50°C to 70°C (derate 2%/°C above 50°C)
    Storage Temperature: -55°C to 85°C
    Humidity Range: 0 to 80% RH, non condensing
    Meter Accuracy: 1% of full scale + 1 count
    Max. Voltage Differential from Output to Safety Ground: 150 VDC
    Remote Start/Stop and Interlock: TTL compatible input or 12-250 VAC (12-130 VDC) or a contact closure
    Cooling: Internal fan, overtemperature shutdown if internal heat sink exceeds set temperature

    Output Voltage
    Voltage ranges from 0-40 VDC; current levels to 25A 

    Power Density

    • 1 kW of power in a 19 lb. package only 1.75 inches high

    Input Voltage

    • 1 kW: 100-132 VAC, single phase, or 200-250 VAC, single phase 47-63 Hz (other inputs available)
    • 1.2 kW: 100-132 VAC, single phase, or 200-250 VAC, single phase 47-63 Hz (other inputs available)
    • 3 kW: 190-250 VAC, three phase or 200-250 VAC, single phase 47-63 Hz (2.5 kW max with single phase input; other inputs available)
     
    Sorensen DCS600-1.7E Sorenson DCS600-1.7E 600 Volt 1.7 Amp Power Supply $1,499.00
    Sorenson DCS600-1.7E 600 Volt 1.7 Amp Power Supply

     

    Sorenson DCS600-1.7E 600 Volt 1.7 Amp Power Supply

    Rent me for $100 a month

      The Sorenson DCS600-1.7E Series 1kW programmable power supplies incorporate current mode switching in a high power density, low profile package. The DCS600-1.7E  provides continuous full output power in a variety of volt/amp combinations. An optional IEEE-488 interface allows integration into any standard ATE system.

    Features

    • 1000 Watts in a 19lb., 1.75" high chassis
    • Line and load regulation of 0.1%
    • Selectable remote programming constants for voltage, current and OVP
    • 230 VAC input, optional 115VAC
    • Optional IEEE-488 interface, with V/I readback and adjustable OVP
    • Optional isolated analog programming
    • CE Mark

    Specifications

    • DC Power Supply Output Ratings: Output Voltage 0 - 600V Output Current 0 - 1.7A Output Power 1020W
    • Line Regulation: Voltage 600mV Current 1.7mA
    • Load Regulation: Voltage 600mV Current 1.7mA
    • Meter Accuracy: Voltage 7.0V Current 0.018A
    • OVP Adjusment Range: 30 - 660V Output Noise and Ripple (V) rms 100mV p-p 500mV (20Hz - 20MHz)

    Input

    • Voltage: 200-250 VAC, (100-132 VAC internal jumper selectable)
    • Frequency: 47-63Hz
    • Soft Start: Line current ramp up to full load on power turn-on

    Output

    • Regulation: Line & Load 0.1% max (0.2% combined)
    • Efficiency: 80% typical
    • Noise Ripple: 10mV-100mV rms, varies by model
    • Transient Response: 500us typical for 30% step load change

    General

    • Operating Temperature Range: 0 - 70C, (derate 2%/ C above 50 C)
    • Remote Programming: Resistance and voltage programming via J3 external connector.
    • Analog Programming Linearity: ± 1%
    • Overvoltage Protection: Crowbar type, adjustable 5-110% of rated output
    • Dimensions: 1.75"h x 19"w x 19"d
     

     

     

     
     
    Sorensen DCS8-125E Sorenson DCS8-125E Power Supply $1,795.00
    New Page 1

     

    Sorenson DCS8-125E Power Supply

    Rent me for $150 a month

    8 Volts at 125 Amps

    The DCS Family is ideally suited for a wide range of applications requiring DC power in a small form factor. Applications range from manufacturing test of automotive components, telecommunications products and avionics to beam steering, process control and laboratory R&D use.
    This family has 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature,remote programming, shutdown and overvoltage protection, status and constantvoltage/urrent mode operation.

    Input Voltage and Frequency 1 kW: 200-250 VAC, single phase, 8A typical, 47-63 Hz; or 100-132 VAC, single phase, 15A typical, 47-63 Hz, internal jumper selectable (see M1 option)

    Operating Temperature: 0°C to 50°C (no derating), 50°C to 70°C (derate 2%/°C above 50°C)
    Storage Temperature: -55°C to 85°C
    Humidity Range: 0 to 80% RH, non condensing
    Meter Accuracy: 1% of full scale + 1 count
    Max. Voltage Differential from Output to Safety Ground: 150 VDC
    Remote Start/Stop and Interlock: TTL compatible input or 12-250 VAC (12-130 VDC) or a contact closure
    Cooling: Internal fan, overtemperature shutdown if internal heat sink exceeeds set temperature

    Output Voltage
    Voltage ranges from 0-8 VDC to 0-600 VDC; current levels from 1.7A to 350A 

    Power Density

    • 1 kW of power in a 19 lb. package only 1.75 inches high
    • 1.2 kW of power in a 19 lb. package only 1.75 inches high
    • 3 kW of power in a 33 lb. package only 3.5 inches high

    Input Voltage

    • 1 kW: 100-132 VAC, single phase, or 200-250 VAC, single phase 47-63 Hz (other inputs available)
    • 1.2 kW: 100-132 VAC, single phase, or 200-250 VAC, single phase 47-63 Hz (other inputs available)
    • 3 kW: 190-250 VAC, three phase or 200-250 VAC, single phase 47-63 Hz (2.5 kW max with single phase input; other inputs available)

     
     
    Tekpower HY3020 Tekpower HY3020 30 Volt 20 Amp Power Supply Contact Sales
    Tekpower HY3020 30 Volt 20 Amp Power Supply

     

    Tekpower HY3020 30 Volt 20 Amp Power Supply

    Rent me for $100 a month

       The Tekpower HY3020 variable 0 to 30 volts at 0 to 20 AMP DC power supply is of very high quality construction. Excellent for regulated power requirements with the variable 0-30 volt 0-20 amp output. Other uses include lab, science projects or any other use where stable voltage up to 30 volts is required. For the variable output the voltage is variable from 0 to 30 volts and the current is also variable from 0 to 20 amps. The digital LED meters display the actual voltage and current within 2 percent. Look at the price you can not find a better deal anywhere.
     

    Features

    • Digital LED Meters
    • Variable Voltage: 0 TO 30 Volts
    • Variable Current: 0 TO 20 Amps
       

    Specifications

    • Output Voltage: 0 - 30V @ 0-20A

    • Switching Power

    • Output Current: 0 - 20 Amps

    • Input Voltage: 110V, 60Hz

    • Constant Voltage / Constant Current

    • Voltage and Current Variable

    • Power effect: CV<0.01%+1mV, CC<0.2% + 1mA

    • Overload effect: CV<0.01% +3mV, CC<0.2% +3mA

    • AC Noise CV<2mV r.m.s, CC <10mA, r.m.s

    • Protection: constant current and short-circuit protection
      CV≤0.1%+5mV(I>6A)   CC≤0.5%+20mA(I>6A)

    • Voltage indication accuracy: LED±1%+2digits, analogue display 2.5%

    • Current indication accuracy: LED±2%+2digits, analogue display 2.5%

    • Load regulation : CV≤0.02%+10mV(I≤6A)   CC≤0.5%+10mA(I≤6A)
                               CV≤0.1%+5mV(I>6A)      CC≤0.5%+20mA(I>6A)

    • Ripple & Noise: CV≤3mVr.m.s    CC≤10mA r.m.s 

    • Digital Voltage and current meters built in with
      Voltage resolution:  2.5% of display reading;

    • 2.5% of Current resolution: display reading

    • Environmental : 0 - 102 F ( 0 -40 C), relative humidity: <90%

    • Size: 14 1/4" X 10 1/4" X 6 1/2" 

    • Weight: 39 pounds

     
     
    Tektronix PS2520G Tektronix PS2520G Triple Output Power Supply Contact Sales
    Tektronix PS2520G Triple Output Power Supply

     

    Tektronix PS2520G Triple Output Power Supply

    Rent me for $100 a month

       The Tektronix triple output PS2520G Power Supplies are versatile supplies suitable for many applications. The PS2520G has a single supply providing a maximum of 6 V and 3 A and two supplies providing a maximum of 36 V and 1.5 A. The supplies can be operated in one of three modes: independent, series or parallel. In the independent mode, the output voltage and current of each supply are controlled independently. In the two tracking modes, the variable outputs are connected either in series or in parallel; the controls of the master power supply adjust the voltage or current of both power supplies. The PS2520G is GPIB programmable. The GPIB command sets are SCPI compatible. Each power supply features 100 memories to store voltage and current limits for instant recall via the front panel or GPIB. Both have a dual 4-digit LED display.

    Features

    • Triple Output
    • One 0 to 6 V, 0 to 3 A
    • Two 0 to 36 V, 0 to 1.5 A
    • Digital LED Output Indicator
    • SCPI Compatible

    • Three outputs allow independent, series, or parallel operation

    • Automatic series or parallel tracking

    • Easy to set, push-button controls

    • Data entry using the keypad, up/down keys

    • Four-digit displays for both voltage and current

    • Overvoltage and overcurrent protection

    • Display readouts for memory, output, and error code display

    • Precision digital-to-analog converter for high resolution

    • High stability, low drift output

    • Memory storage and recall

    • Automatic sequencing with timer

    • Diagnostic self-test at power on

    Applications

    • Training
    • Manufacturing Production Test
    • Field Repair
    • Bench Calibration and Repair
    • Product Design
    • Laboratory and Research
    • Education
     
    Tektronix PS280 Tektronix PS280 Triple Output Power Supply Contact Sales
    Sage Instruments 930A Analog/DS1 PCM Communications Test Set

     

    Tektronix PS280 Triple Output Power Supply

    Rent me for $100 a month

       The Tektronix PS280 Laboratory DC Power Supply is a multifunction bench or portable instrument. This regulated power supply provides a fixed 5 V output for powering logic circuits and two variable outputs for a wide variety of test and experimental uses. The PS280 contains two identical, independently adjustable DC power supplies that you can vary from 0 to 30 V. The current on the PS280 variable power supplies varies from 0 to 2 A. In all other respects the instruments are identical. Unless otherwise noted, descriptions and procedures in this manual apply to both instruments.

    Front panel switches select one of three modes of operation:

     Independent - In this mode, the output voltage and current of each supply can be controlled independently.

     Series - In this tracking mode, the variable outputs are connected in series, and the controls of the master power supply adjust the voltages or currents of both power supplies. Series mode allows the power supplies to be varied from 0 to 60 V at 0 to 2 A for the PS280.

     Parallel - In this tracking mode, the variable outputs are connected in parallel, and the controls of the master power supply adjust the voltages or currents of both power supplies. Parallel mode allows the power supplies to be varied from 0 to 4 A for the PS280 at 0 to 30 V.

    Features

    • Triple Output
    • One Fixed 5 V, 3 A Supply
    • Two Variable Outputs, 0 to 30 V, 2 A
    • Digital LED Output Indicator
    • Variable Current Limiting
    • Selectable Independent Tracking Mode
    • Dual Tracking, Variable 0 to 30 V, 2.0 A
    • One Year Warranty
     
    Tektronix PS503A Tektronix PS503A Triple Power Supply $99.00
    Tektronix PS 503A Triple Power Supply 0-20 V Plus +5 V @ 1A

    Tektronix PS 503A Triple Power Supply 0-20 V Plus +5 V @ 1A

       The Tektronix PS 503A provides dual floating variable 20V supplies, plus a fixed 5-V, 1_A supply. The PS 503A features superior tracking, over voltage protection, and remote resistance programming of voltage. When operated in the high power compartment of a TM504, TM506, or TM5006 mainframe, the PS503A can provide up to 1 A from both of the 20V supplies. A 0 to 40V variable supply with up to 1 A of current can be configured by grounding one of the two outside terminals of the variable supplies. The two variable supplies can be set individually, then varied in a tracking mode with a signal control. In addition, the plus and minus floating outputs can be programmed remotely, by either voltage programming or resistance programming via the rear interface.
     

    Features

    • Independent Controls
    • Dual tracking Voltage Controls
    • 0 to 20 V at 1 A (in a high Power Compartment)
    • Fixed Output 5 V at 1 A
    • Remote Resistance Programing

     
     
    Tektronix Tektronix TM501 Single Channel Power Module Contact Sales
    Tektronix TM501 Single input Power Module

     

    Tektronix TM501 Single input Power Module

    Rent me for $100 a month

       The Tektronix TM501 Power Module supplies power required for a single TM500-Series of Modular Instrumentation (sold separately). Input voltage is 100, 110, 120, 200, 220 & 240 VAC, 48 Hz to 440 Hz, 35 W power consumption. Interchangable with the TM501A.
     
    Tektronix Tektronix TM502A Power Module Contact Sales
    New Page 1

     

    Tektronix TM502A

     

    Description:

    * Compartments: 2
    * Compatibility: TM500 series plug-ins
    * 100, 110, 120, 200, 240 Vac; 48-400 Hz operation
    * Weight: 9 lb; Size: 140 mm (5.5 in)H x 145 mm (5.7 in)W x 407 mm (16.0 in)D
    The TM502A power module accepts up to 2 single width TM500 series modules.
     
    Tektronix Tektronix TM503A Power Module Contact Sales

     

    Tektronix TM503A 

     

    DESCRIPTION:


    The TM503A is a three-wide power module compatible with all TM500-Series plug-ins. Up to three single width modules can be plugged into the TM503, or one single and one double width module can be accommodated. The TM500-Series of plug-ins includes oscilloscopes, function generators, scope calibration equipment, DMM's, counters and power supplies. Also choose from pulse generators, operational amplifiers, band pass filters, and current probe amplifiers. You may be able to fit every instrument you'll need into one small mainframe.

     
    Topward 6303D Topward 6303D Triple Power Supply $500.00

    Topward 6303D Triple Output Power Supply

    0-30V/0-6A x 2; 5V/5A Triple Output.

    Compare to the Agilent E3631A.

    A good deal for the money.

    Specification for Topward 6000 Digital DC Power Supply
    Output Voltage Zero to rated voltage continuously variable with front panel voltage knob
    Output Current Zero to rated current continuously variable with front panel current knob
    Line Regulation CV±0.01%+2mV; CC±0.01%+2mA
    Load Regulation
    CV±0.01%+2mV;
    CC<10mA @ 100W;
    15mA @ above 100W Ripple & Noise CV
    0.5mVrms @ 100W;
    1mVrms @ above 100W CC
    1mArms @ 100W; <3mArms @ above 100W Transient Response
    100µS to within 0.1% of set voltage (50% to 100% load change)
    Output Impedance <2mW +2mH
    Operating Range 0 to 40° C ambient temperature
    Display Accuracy 0.1%+2 digits
    Overload Protection Automatic crossover from CV to CC mode
    Series Connection Different models can be chained to increase output up to 240 Vdc
    Parallel Connection Another same model can be paralleled to increase output to 24 Amps 5V/5A Fixed Supply Regulation 10mV; Ripple & Noise 2mVrms;
    Output: 5V± 0.25 V
    Tracking Accuracy ± 0.2%+10mV
    Operation Mode Switch Independent: Series: Parallel: Two fully independent variable supplies at rated voltage and current and a fixed 5V/5A supply One variable supply with 2X rated voltage output at rated current. Or, One dual polarity tracking supply with rated output and current. Plus A 5V/5A supply One variable supply with rated voltage at 2X rated current and a fixed 5V/5A supply
    Power Requirement 100/120/220/240±10% Vac; 50/60Hz single phase
     
    Xantrex HPD15-20 Xantrex HPD15-20 15 Volt 20 Amps Power Supply $795.00
    New Page 1

     

    Xantrex HPD15-20 15 Volt 20 Amps Power Supply

    Rent me for $150 a month

    Incredible Power in a small portable package

     

    300 Watts with Linear Performance

       The HPD15-20  provides 300 watts in a quarter-rack wide chassis. It is ideal for OEM applications where wide adjustment of output voltage or current is required in a compact package, providing up to 300 watts of clean power. The HPD15-20  is available in three models and is the smallest 300-watt programmable power supply available.

    HPD15-20 uses switch-mode technology combined with linear post regulation to provide performance comparable to an all-linear design. Excellent line and load regulation is matched by low noise and good transient response. HPD15-20 is available in singles and duals in a single package for benchtop use. It can be combined in mix and match rack combinations with the quarter-rack 60 watt XT or 500 watt XPD. For systems applications, multiple units can be rack mounted in one to four unit configurations for up to four independent 300-watt outputs.

    Features

    • Low noise and ripple
    • Excellent line/load regulation
    • Constant voltage or constant current operation with automatic crossover and mode indication
    • Current limit
    • Remote sense
    • CE, CSA approvals

    Options

    • GPIB Interface Card (16 Bit)
    • RS-232 Interface Card (16 Bit)
    • Analog programming interface card
    • 200-250 VAC Input (50/60 Hz)
    • Switch selectable input 110 VAC or 220 VAC
    • Ten-turn current potentiometer
    • Locking bushings for front panel controls
    • Locking knobs for front panel controls

    Electrical Specifications for Model HPD15-20

    Output Ratings

    • Output Voltage 0-15 V

    • Output Current 0-20 A

    • Output Power 300 W

    Line Regulation

    • Voltage 2 mV

    • Current 3 mA

    Load Regulation

    • Voltage 2 mV

    • Current 3 mA

    Meter Accuracy

    • Voltage (1% of Vmax + 1 count). 0.25 V

    • Current (1% of Imax + 1 count) 0.3 A

    Output Noise (0-20 MHz) Voltage (p-p) 75 mV

    Output Ripple (rms) Voltage 5 mV

     
    Xantrex HPD 60-5 Xantrex HPD60-5 60 Volt 5 Amps Power Supply $795.00
    Xantrex HPD60-5 60 Volt 5 Amps Power Supply

     

    Xantrex HPD60-5 60 Volt 5 Amps Power Supply

    Rent me for $150 a month

    Incredible Power in a small portable package

     

    300 Watts with Linear Performance

       The HPD60-5  provides 300 watts in a quarter-rack wide chassis. It is ideal for OEM applications where wide adjustment of output voltage or current is required in a compact package, providing up to 300 watts of clean power. The HPD60-5  is available in three models and is the smallest 300-watt programmable power supply available.

       The HPD60-5  uses switch-mode technology combined with linear post regulation to provide performance comparable to an all-linear design. Excellent line and load regulation is matched by low noise and good transient response. HPD60-5  is available in singles and duals in a single package for bench top use. It can be combined in mix and match rack combinations with the quarter-rack 60 watt XT or 500 watt XPD. For systems applications, multiple units can be rack mounted in one to four unit configurations for up to four independent 300-watt outputs.
     

    Features

    • Low noise and ripple
    • Excellent line/load regulation
    • Constant voltage or constant current operation with automatic crossover and mode indication
    • Current limit
    • Remote sense
    • CE, CSA approvals

    Options

    • GPIB Interface Card (16 Bit)
    • RS-232 Interface Card (16 Bit)
    • Analog programming interface card
    • 200-250 VAC Input (50/60 Hz)
    • Switch selectable input 110 VAC or 220 VAC
    • Ten-turn current potentiometer
    • Locking bushings for front panel controls
    • Locking knobs for front panel controls

    Electrical Specifications for Model HPD60-5

    Output Ratings

    • Output Voltage 0-60 V

    • Output Current 0-5 A

    • Output Power 300 W

    Line Regulation

    • Voltage 2 mV

    • Current 3 mA

    Load Regulation

    • Voltage 2 mV

    • Current 3 mA

    Meter Accuracy

    • Voltage (1% of Vmax + 1 count). 0.25 V

    • Current (1% of Imax + 1 count) 0.3 A

    Output Noise (0-20 MHz) Voltage (p-p) 75 mV

    Output Ripple (rms) Voltage 5 mV

     



    Test Equipment, test eqipment, test and measurement, US INSTRUMENT SERVICES, rental, sales, used, HP, Hewlett Packard, Tektronix, tektronics, TEK, CSI, Campbell, oscilloscopes, ossiliscopes, optical, fiberoptic, Telecom, test sets, network, logic, B&K, Bruel, Kjaer, Dranetz, Telecom, TTC, Wandel, Goltermann, spectrum analyzers, logic analyzers, digital, multimeters, counters, data acquisition, HiPot, meggers, ground testing, protocol, pirateracing, butch


    ©1999-2002 [fill in company name] All Rights Reserved contact webmaster | powered by corezon
    All logos and trademarks are properties of their respective companies. Product price, specification, warranty and availability subject to change without notice.