|
Network Communications Corporation Network Probe 7050 WAN
protocol unit
NCC 7050 Network Probe WAN
Protocol Test Set
Rent me for $100 a
month
The Network Communications Corp Network Probe 7050
WAN protocol unit tests T1, E1 / 2MB data, ISDN, RS232, RS422, V.35
plus dual channel oscilloscope, digital voltmeter and much more all
in one package. Extremely powerful and portable the Network
Communications Corporation 7050 provides a low cost solution to
internetwork WAN troubleshooting.
Test Interfaces
- 34 pin V.35 Interface
- 25 pin RS-232C/Mil-188C Test Interface
- 37 pin RS-449/422/423 Test Interface
- 9 pin RS-232C Interface for Serial Printing and Remote
Control
- Dual Bantam and RJ-48 T1/E1 Interface Jacks
- 15 pin T1/E1 Interface
- BNC Jack for T1/E1 Clock Input, ISDN Clock input and External
BERT Clocking
- RJ-48 jack for use by the speaker monitor input and for tone
generator signal injection input/output
- Handset Jack for Voice Communications
- ISDN (S/T & U) Interface Jacks
Protocol Analysis Options
- PPP, Frame Relay, SNA, X.21, X.25, Baudot, DDCMP, ISDN
(Q.921/Q.931), LAPD X.25, SS7/SS#7/IS-41
T1 / 2.048 MHz / CEPT / E1 Transmission
Tests
- US Standard T1-1.544 Mbps
- CCITT Standard 2.048 Mbps
- Dual T1/E1 Receivers and Transmitters
- Clocking: Recovered, External, Internal
- Selectable Line Buildout: O dB, -7.5 dB, -15 dB
- Automatic Line Buildout: O to -37 dB
- Selectable Line Equalization: 0-133 Feet, 133-266 Feet, 266-399
Feet, 399-533 Feet, 533-655 Feet
- Line Codes: AMI, HDB3, B8ZS, B7 and Auto Configure
- Framing: Unframed, D1D, D2, D3, D4, ESF, CEPT 2M (E1), Framed
2M , Multiframed, and Auto Configure
- Line Terminations: Terminated (US 100 ohms, G.703 at 75 ohms or
120 ohms), Bridged ( 1000 ohms), Drop/Insert Terminated,
Drop/Insert Bridged
- BERT Test Patterns: Mark, Space, 1:1 (Alt), 1:3, 1:7, 2:8.
Yellow Alarms, Blue Alarms, Red Multi-frame Alarms, 3:24, 63, 511,
2047, QRSS, 2^15-1, 2^20-1, 2^23-1, 2^23-1 with 14 Zero
Suppression, 24 bit User Defined Pattern
- CSU Loop Up/Loop Down commands, Smart Jack Loop Up/Loop Down
commands
- Time stamped Error Reporting to Disk and/or Printer
- Scripted BERT Testing (User Definable)
- Drop and Insert
- Drop and Insert to RS-232, RS-449, V.35 Interfaces or Any
Protocol Analysis Instrument and BERT
- 16K BRITE Card Drop to Q.921/Q.931
- Channel Display (24 or 32 Channel Display)
- 24 T1 or 32 E1 Channels Simultaneously Displayed
- Hex, Binary, status
- Signaling Bit Display
- 24 Channel T1 or 32 E1 Display of Signaling Bits
- Wink Measurements for Response and Duration Times (Intrusive
and Monitor Modes)
- Time stamped Signal Bit Capture, 1-24 Channels
|
